New approach to enhance adhesions between carbon nanotube emitters and substrate by the combination of electrophoresis and successive electroplating

Complementary electroplating combined with electrophoresis enhanced the field emission characteristics of emitters by improving the adhesions between CNT emitters and substrate. The emitting current of the CNT emitters prepared by our combined method increased nine times higher than that of CNT emitters prepared by electrophoresis only, since electroplating improved the adhesion of CNT emitters. During the life-time measurement for 10 h, the emitting current of CNT emitters fabricated by electrophoresis only was drastically decreased to 13% of the initial current, while that prepared by the combination of electrophoresis and successive electroplating decreased to 64% of the initial current. We suggest that our method is a promising approach for the efficient fabrication of reliable CNT emitters.     

湿法成形薄型陶瓷砖的干燥

分析了湿法成形薄型陶瓷砖干燥的特点．具体讨论了微波干燥和少空气干燥方式在湿法薄形陶瓷砖干燥上中应用及干燥过程中坯体传动方式的选择。     

Porosity distribution in highly compressible cake: Experimental and theoretical verification of the dense skin

The rate of filtration and the water content of cake are influenced by the existence of a dense skin in a highly compressible cake. The phenomenon of the dense skin has been rarely studied, and its existence has not been verified experimentally. In this study, the porosity variation in a very compressible cake is measured by using a new experimental apparatus, and with this the existence of dense skin has been established experimentally. ‘Unified theory on solid-liquid separation’, a recently developed theory, is utilized for calculating the porosity variation in a very compressible cake.     

介绍《电工电子实践课程丛书》--东南大学电工电子系列实践课程教改成果之一

本文介绍由东南大学组织编写，东南大学出版社出版的《电工电子实践课程丛书》的编写背景，每本教材内容的简要内容，特色与使用情况。     

A new alloy design concept for austenitic stainless steel with tungsten modification for bipolar plate application in PEMFC

The feasibility of a new alloy design concept utilizing the principle of ‘tungsten bronze effect’ is critically evaluated for the development of metallic bipolar plates for proton exchange membrane fuel cell (PEMFC). An austenitic stainless steel (ASS) is modified with W and La to improve the stability of the passive film in an acidic environment as well as to reduce the contact resistance by the tungsten bronze effect. The experimental ASS containing W and La was evaluated in a simulated PEMFC environment of H₃PO₄ and H₂SO₄ solutions at 80 °C, and the electrical property was evaluated by performing a contact resistance test. The test results show that the ASS modified with W and La has good passive film stability for corrosion resistance and low contact resistance. The X-ray photoelectron spectroscopy (XPS) analysis clearly suggests the possibility of the tungsten bronze effect from the change in valency state of W⁶⁺ to W⁵⁺ in the passive film formed on the modified ASS. The feasibility of a new alloy design concept utilizing the ‘tungsten bronze effect’ is well demonstrated; however, more study is highly required for the development of metallic bipolar plates of PEMFC.     

经食道心房调搏的放射性核素心血管造影

本文应用反符合电路剔除调搏脉冲干扰的方法,制成经食道心房调搏心电心音门电路触发装置,用于经食道心房调搏的核素心血管造影。参考Tzivoni标准,当逐级增加调搏心率至140次/min或亚极量心率后发现:冠心病人有调搏后EF降低;急性心肌梗塞病人EF减低更为明显,并呈室壁反向运动。因此,心房调搏核素心血管造影有助于冠心病,特别是心肌梗塞的诊断。     

岗位体验式教学法在雷达装备实践教学中的应用

针对雷达装备实践教学中演示式教学法对于学员能力的拓展和装备的综合运用等方面存在的问题,将岗位体验式教学法运用于雷达装备实践教学中.首先分析岗位体验式教学法的基本内涵;然后提出前期准备、场景设置、教学实施、交流研讨和总结讲评等5个方面的具体实施方法,进行实例分析;最后给出岗位体验式教学法的实施效果.教学实践结果验证了该方法的有效性.     

NIT-Ph-p-BEN氮氧自由基的制备及催化降解性

以对醛基苯甲酸为原料，通过醛酸与2,3-二甲基-2,3-二羟胺基丁烷缩合，再经NaIO4氧化最终制得4-(4,4,5,5-四甲基-1,3-二氧化物)咪唑基-1-苯甲酸（NIT-Ph-p-BEN氮氧自由基）。采用FTIR、UV、ERP（电子顺磁共振波谱仪）和元素分析等对其结构进行表征；通过催化降解废水中有机染料甲基橙、甲基蓝和罗丹明B对其催化活性进行了评估。结果表明，当甲基橙、甲基蓝和罗丹明B浓度为15 mg/L，NIT-Ph-p-BEN质量浓度为0.15 g/L，H2O2浓度为30 mmol/L时，NIT-Ph-p-BEN对甲基橙有更好的催化降解性，仅在1 h内甲基橙的降解率达到94.26%。此外，反应机理表明，H2O2有助于实现NIT-Ph-p-BEN自由基的再生和循环利用。