渤中13-1油田井身结构优化研究

针对渤中 1 3- 1油田钻井过程中存在的主要问题 ,利用测井、地质、录井和钻井资料 ,对该油田的井身结构进行研究 ,设计出合理的井身结构 ,优化了套管程序 ,为进一步减少钻井过程中漏、喷、塌、卡等复杂情况的发生 ,提供了科学的理论依据     

空间分析研究

提出了空间分析的概念及其功能实现的四个层次,分析了基于GIS空间分析的现状,并对以神经网络、进化计算和人工生命为主要代表的智能计算工具的特点、功能、适用领域进行了阐述,指出它们将为未来空间分析的发展提供良好的前景。     

颗粒增强钢基复合材料轧辊研究的现状

分析了轧辊的发展趋势,探究了颗粒增强钢基复合材料的力学性能,揭示了颗粒增强钢基复合材料轧辊的性能优势;概述了颗粒增强钢基复合材料轧辊的发展现状和各种制备工艺,并简要分析了轧辊材料的发展.     

主跨348m+348m三塔单索面PC梁斜拉桥

宜昌市夷陵长江大桥采用三塔斜拉桥，总体布置为(128．08 348 348 120．35)m。介绍了该桥的合理性及结构特点。     

Ionothermal synthesis of a three-dimensional zinc phosphate with DFT topology using unstable deep-eutectic solvent as template-delivery agent

A three-dimensional zinc phosphate compound with DFT topology, designated as ZnPO₄-EU1, has been synthesized by an ionothermal approach from the system HF-ZnO–P₂O₅-choline chloride-imidazolidone. Ethylenediamine, derived from decomposition of the imidazolidone component of the deep-eutectic solvent (DES) itself, is delivered to the synthesis and serves as an appropriate template for ZnPO₄-EU1. Experiments in which the synthesis conditions were varied showed that ZnPO₄-EU1 may be prepared over a wide molar ratio of P/Zn = 0.55–13.0. Powder X-ray diffraction patterns have been obtained at intervals to track the crystallization process of this material. The experimental data show that Zn₃(PO₄)₂ · 4H₂O (a dense phase) was first isolated from the DES after reaction for 1 h. Subsequently, the pure phase of ZnPO₄-EU1 was obtained with increasing crystallization time from 12 h to 72 h. The experimental results show that the nucleation and crystallization take place with relatively low levels of solvent degradation, demonstrating that zinc phosphate with a three-dimensional framework can be synthesized by in situ generation of an appropriate template using an unstable DES at high temperatures (150–200 °C).     

Polyetherimide substrates for future high density optical data storage

Polyetherimide (PEI) substrate for next‐generation high density optical data storage is fabricated and characterized. Cover‐layer incident or first‐surface recording configurations do not require optical properties of the substrate, which are the prerequisite conditions for the conventional material of polycarbonate (PC). Instead of the optical properties, good mechanical properties with a sufficient transcribability are required. Even though PEI has higher glass transition temperature than that of PC, a microscopic transcribability of PEI is comparable with PC by laminating a thermal insulation layer on the backside of a stamper to retard the heat flow. A macroscopic warpage of PEI substrate is smaller than that of PC substrates, which reduces tilt and servo burden. The lowest critical speed coupled with the flutter of PEI substrate is larger than that of PC substrate because of the mechanical properties of PEI. POLYM. ENG. SCI., 48:97–101, 2008. © 2007 Society of Plastics Engineers     

基于USB的155 Mb/s码型发生器的研制

介绍了一种带USB接口的光的155Mb／s码型发生器。伪随机码和其他格式的码型由PC产生通过USB接口进入双口RAM，再经串并变换后由光发射模块发射。该系统可方便地设定各种格式的码型，并同时具备光接口和电接口，可广泛应用于光通信各种实验中，具有重要的实用价值。     

为国家重点建设项目服务打造有公信力的名牌监理公司

中咨工程建设监理公司是中国国际工程咨询公司的全资子公司。而其母公司早在80年代即承担起多个工程项目的施工监理。进入90年代，中咨监理业务得到迅速发展，成为中国监理行业的一支重要力量。2001年起经过整合重组而成中咨工程建设监理公司后，以集中和优化资源配置，努力打造有公信力的名牌监理公司。经过多年的探索和积累，该公司形成了一套既符合国家规范，又具有自身特色的管理模式。本文介绍该公司在承担国家重点建设项目工程监理方面的一些经验和做法。