A high-resolution burst-mode laser transmitter with fast and accurate level monitoring for 1.25 Gb/s upstream GPONs

An innovative burst-mode laser transmitter (BM-TX) is presented for gigabit-capable passive optical network (GPON) upstream transmission at 1.25 Gb/s. The laser bias and modulation current each can reach 80 mA with a resolution of 0.1 mA providing a total drive current up to 160 mA. Both currents are generated by 10-bit current steering digital-to-analog converters (DACs), the architecture of which is specially adapted to yield a monotonic current setting at settling times below 12.8 ns. Tests show that fast automatic power control (APC) can stabilize and track the launched optical power with a tolerance of less than 1 dB over a wide temperature range for outdoor operation. The APC only requires a straightforward calibration of the "0" and the "1" level at room temperature. Optical level monitoring on strings of four consecutive "0" bytes and two consecutive "1" bytes at 1.25 Gb/s is demonstrated. APC based on such short strings of data has not been shown before. The circuits have been designed in a 0.35 /spl mu/m SiGe BiCMOS process. Experimental results show that this dc-coupled BM-TX meets the specifications of the recently approved ITU-T Recommendation G.984.2 supporting an intelligent power leveling mechanism (PLM).     

铸铝激光熔融处理后的组织与性能

应用光学和电子显微镜及显微硬度计研究了铸造Al-Si合金经激光表面熔融处理后的组织和性能。指出,组织分熔化区、过度区和基体三层。在熔化区中树枝状先共晶α相的平均宽度由原始组织的20～40μm细化到2～3μm,同时共晶组织也被大大细化。这些变化使显微硬度值由67.4提高至109～115.     

尺寸驱动的变参设计系统研究

本研究在简介国际上先进的变参设计几种方法及优点后,叙述了一个国家863/CIMS项目:CAD/CAPP/NCP集成系统中二维尺寸驱动的变参设计子系统的构成与功能;然后着重阐述了本系统采用的尺寸驱动的变参设计思想和几何约束建立的原则,并提供了系统数据结构,最后以几个实例证明了此方法的正确性与工程实用性。     

基于神经网络的模拟电路故障诊断优化近似方法

本文提出了线性电阻电路故障诊断的一种神经网络优化方法。其基本思想是应用Ｈｏｐｆｉｅｌｄ网络原理来处理Ｌ１范数问题，以此来进行诊断。对实例的计算证明此法是可行的。     

中高频小功率电子元器件用非晶材料的开发与应用

随着电力和电子技术的飞速发展，相应的元器件向高频化，小型化，高效率和节能的方向发展，从而对元器件用材料也提出了更高要求。为此，本文概述了冶金部钢铁研究总院近年来所研究的用于开关电源，脉冲变压器，传感器，电流互感器和电感器等方面的非晶软磁合金的性能及其应用概况。     

Soliton position jitter caused by periodic amplification andself-frequency shift

The formula for soliton timing jitter due to self-frequency shift and pulse width fluctuations caused by spontaneous-emission noise has been deduced. Such timing jitter is compared with that caused by the carrier frequency shift due to spontaneous-emission noise. It is shown that the timing jitter due to the self-frequency shift can be as large as the timing jitter due to carrier frequency shift when the total transmission distance is 100 times longer than the soliton period     

Linear periodically time-varying discrete-time systems: Aliasing and LTI approximations

Linear periodically time-varying (LPTV) systems are abundant in control and signal processing; examples include multirate sampled-data control systems and multirate filter-bank systems. In this paper, several ways are proposed to quantify aliasing effect in discrete-time LPTV systems; these are associated with optimal time-invariant approximations of LPTV systems using operator norms.     

同时含有稀土元素La Ce Pr Nd的材料的电子探针定量分析方法

研制了稀土六硼化物单晶LaB_6、CeB_6、PrB_6和NdB_6电子探针分析标样。根据X-射线峰位表和实测的特征X-射线谱,考察分析了La、Ce、Pr和Nd元素谱线之间的干扰情况,发现分析谱线PrLα_1受到L_αLβ_1线严重的干扰。以混合稀土金属为试样,采用扣除谱线重叠强度的背底非对称测量等方法对L_n、Ce、Pr和Nd进行了电子探针定量分析,其结果与荧光X-射线光谱分析结果符合较好。     

原料对铁合金冶炼过程的影响

介绍了铁合金冶炼时需要准备的原料，对不合格原料需要进行加工处理，达到合格粒度。并提出了影响铁合金冶炼过程有原料的粒度，配料称量，混合等重要因素。