发动机进气系统高通量富氧膜的研制

采用交联改性的方法对较低分子量的乙烯基硅橡胶进行了改性研究,制备了高通量的富氧膜,结合单因素实验法和Design-expert正交实验设计,考察了原料配比、交联反应时间、固化温度和固化时间等因素对富氧膜性能的影响,确定了最佳富氧性能膜的制备条件:原料配比4.3,反应时间2.15h,固化温度86.25℃,固化时间1.75h;获得了富氧浓度为28.68%,透气量为4696.33 barrer的富氧膜,该膜的富氧浓度与常规商品化膜相当,透气量为常规商品化膜的2~4倍,有应用于发动机富氧进气系统的前景。通过扫描电镜检测、机械性能检测等手段对复合膜进行了进一步表征。     

Aggregation-induced emission luminogen-assisted stimulated emission depletion nanoscopy for super-resolution mitochondrial visualization in live cells

Nano Research - Aggregation-induced emission luminogens (AIEgens) are fluorescent agents that are ideal for bioimaging and have been widely used for organelle targeting, cellular mapping, and...     

MHSACAE-CNN在噪声下的电机轴承故障诊断

电机的运行情况复杂,实际运行工况下会有大量的噪声,导致其轴承故障诊断精度下降。为了改善这一问题,提出了一种基于多头自注意力机制的一维全卷积自编码网络（One-dimensional Fully Convolutional Autoencoding Network Basedon Multi-head Self-attention,MHSACAE）与卷积神经网络（Convolutional Neural Network,CNN）结合的轴承故障诊断方法。该方法先采用MHSACAE网络进行降噪,再通过CNN进行故障诊断。其中MHSACAE去噪网络采用无监督训练的方式,充分考虑了实际工况和序列数据内在联系,在实现对噪声的滤除效果的同时,最大限度地保留下了原始的故障信息,使得CNN可以实现在噪声情况下对电机轴承故障的高精度诊断。通过与其他轴承故障诊断方法在噪声情况下进行对比,证明提出的方法具有更好的效果。     

Fabrication of Titanium Aluminides via Powder-Cored Wire Arc Additive Manufacturing: Microstructural and Mechanical Characterization

Herein, an innovative powder-cored wire arc additive manufacturing (PC-WAAM) process is proposed to fabricate γ-TiAl thin-walled intermetallic alloy. The metallography, phase composition, and mechanical properties at different thin-wall locations are characterized. The results show that the alternatively distributed layer-like microstructure composed of α₂ (Ti₃Al) and γ (TiAl) phases is obtained along the building direction. The content of α₂ phase exhibits the tendency of decreasing from the bottom to top region. This unique microstructure characteristic is closely related to the typical thermal cycling history during deposition. Moreover, the tensile strength and microhardness of the top region are lower than the middle and bottom region. In general, the current PC-WAAM technique shows promising capability of fabricating γ-TiAl intermetallic alloy with low cost. This work becomes a valuable reference for understanding the evolution mechanism of microstructure and paves the way for the flexible and customized additive manufacturing of γ-TiAl alloy.     

Abrasion-Resistant and Enhanced Super-Slippery Flush Toilets Fabricated by a Selective Laser Sintering 3D Printing Technology

Flush toilets waste a significant amount of water every day due to the unavoidable adhesions between human waste and the toilet surfaces. Super-slippery surfaces can repel complex fluids and various viscoelastic solids, however, are easily broken by mechanical abrasions. Herein, the fabrication of an abrasion-resistant super-slippery flush toilet (ARSFT) is reported using a selective laser sintering 3D printing technology. Unlike traditional super-slippery surfaces with limited thicknesses which can be easily worn away, the powder-sintered strategy endows the ARSFT not only with a self-supporting 3D complex shape but also with a porous structure that can accommodate considerable lubricants for an abrasion-resistant super-slippery property. As a result, the as-prepared ARSFT remains clean after contacting with various liquids such as milk, yogurt, highly sticky honey, and starch gel mixed congee, demonstrating excellent repellence to complex fluids. Besides liquids, the ARSFT exhibits a high resistance to sticky synthetic feces. Notably, even after being abraded to 1,000 cycles of abrasion using sandpaper, the ARSFT maintains its record-breaking super-slippery capability. The concept of the 3D-printed object with a superior abrasion-resistant slippery ability will improve the development of super-slippery materials and further save water consumption in the human society.     

Preparation of nanometre size oxide particles using filter expansion aerosol generator

Crystalline zinc oxide particles of nanometre size (< 20 nm) particles were produced from a zinc acetate solution by using a filter expansion aerosol generator (FEAG). The FEAG is an aerosol generator that is operated at 60 torr reactor pressure and produces droplets of around 2 m. The shape of the particles produced by the FEAG were distinctively different from those produced by the ultrasonic spray source (USS). Results from scanning electron microscopy (SEM) and X-ray diffractometry (XRD) indicated that crystalline zinc oxide particles of nanometre size were produced at 600 °C in 0.02 s residence time. Weight loss of these particles, determined by thermogravimetric analysis (TGA), was 3 wt%. Based on the morphology change as a function of the reactor temperature and solute concentration, we proposed that the nanometre particles were formed by uniform precipitation at the drying stage and decomposition followed by disintegration into nanometre particles. It was also shown that exothermic decomposition of the solute was not required for the disintegration of the primary particles in the FEAG process. This result opened up an opportunity for producing carbon-free nanometre particles from nitrate salts by using the FEAG.     

嵌入式系统芯片的软硬件协同仿真环境设计

针对嵌入式系统芯片SoC开发验证阶段的需求,介绍了一种通用的SoC软硬件协同仿真平台。软件仿真由C／C＋＋和汇编语言编写,硬件仿真基于VMM验证方法学所搭建,SoC设计代码由RTL代码编写而成。将SoC设计代码中的ARM由DSM模型替代,通过VCS编译器将软硬件协同起来进行信息交互,实现一种速度快、真实性高、调试方便的...     

Effect of axial and radial velocities on solids mass flow rate measurement

In coal powder flow transportation and combustion, powder mass flow rate is a key parameter to be monitored and controlled. Electrostatics is one of the techniques used for such task with its non-intrusive, robust, and low cost natures. The passive electrostatic meters measure charge induced on the detecting electrodes. As it is known that the induced signal is not only dependent on the solids mass flow rate, but also affected by solids velocity. However, the velocity of particles usually referred to is the axial velocity. In reality, the solids velocity is a vector, its projections in both the radial and tangential directions also need to be investigated. This paper analyses the dynamic sensitivity of ring-shaped electrostatic sensors using the finite element method (FEM), and investigates the influence of the axial and radial velocities on the induced signal on the electrodes.