石津灌区水电发展回顾与展望

对石津灌区的水电发展历史进行了回顾,并对南水北调实施后的石津灌区水电发展进行了预测以及对开发水电后进行评价。     

Nd3+ Doped Silicate Glass Photonic Crystal Fiber with Random Hole Distributions

The fabrication of one kind of large core area Nd3 doped silicate glass photonic crystal fiber, and demonstration of the fiber's waveguidence properties were reported. This fiber owns a random air hole distribution in the cladding. The measured minimum loss of this kind of fiber is 10 dB·m-1 at 660 nm. These fibers can sustain only a single mode at least over wavelength ranging from 660 nm to 980 nm.     

多信道E1映射复用成帧芯片PM8316及其应用

PM8316是PMC-Sierra公司生产的一种低功耗、高性能的多信道E1映射复用成帧芯片。该芯片内部集成了映射器、复用器、成帧器，其处理容量为63路E1，并含有8位微处理器总线接口和5个标准信号的JTAG测试端口，可支持收发抖动衰减。文中介绍了PM8316的主要功能和接口，给出了它在SDH终端设备中的主要信号电路框图。     

用有限带宽反射波波形分析法进行储层横向预测

以正演地震模拟为基础的有限带宽反射波渡形分析法是一种新的储层横向预测方法。首先利用波形分解确定地震反射层的地质属性,找出能反映岩性变化的反射波波形特征参数;然后,采用多元数据聚类分析和灰色系统理论完成储层横向的预测。文中以预测江苏 J 凹陷 F 构造上阜二段生物灰岩分布及厚度横向变化为例,简述了反射波波形分析的全过程。预测结果已为钻探证实。     

非接触型光外差轮廓仪

本文介绍一种纳米级非接触型高精度光外差轮廓仪,它是基于普通光路的光外差干涉仪。工件表面被两束有微小频差的激光束所照射,其中一束经聚焦后用作测量光探针来扫描工件表面,另一束则用作参考光束。两束光经表面反射后产生干涉。测量信号和参考信号的相位差与表面的微不平值成正比。仪器的横向分辨率为2μm,高度分辨率为1 nm,它不需要对试样作大范围的调整,且可用试样自身作参考面。信号经光电转换后由微型计算机进行处理,它能快速完成测量、计算、显示及打印出各种参数和曲线。     

“香山81号院”（半山枫林二期）外环境设计

1“居山”与”隐贵山居“ 回想一下人类的聚居行为颇为有趣，当年我们的祖先拼命从险山恶水的自然环境中挣脱出来，为的是得到更加安全和便利的聚居条件，但似乎从那一刻起本能式的回归意识便时刻魂牵梦绕，隐隐作响。其实无论是脱离自然还是回归自然，对于现实而言两者皆是虚幻和理想的。     

Effect of fluoropolymer antidripping agent on the microstructure and properties of polyesters

Poly(ethylene terephthalate) (PET) is of excellent mechanical properties and melt processability and is widely used as raw material for textile fibers. However, the flame retardant properties of PET were rather poor, and both reactive and additive phosphorus- and halogen-containing compounds have been employed to enhance the reaction-to-fire properties while the meltdripping behaviour during burning hasn’t been handled properly with the flame retardants. In this work, fluoropolymer was blended with both pure PET (pPET) and reactive phosphorus-containing flame retarded copolyester (fPET), and the flame retardance and char formation and mechanical properties of the resulted pPET and fPET blends were investigated. The tensile strengths of modified pPET samples were worsen whereas those of modified fPET samples were improved at low concentrations. The initial thermal degradation in nitrogen was accelerated remarkably for the two polyesters with fluoropolymer. The oxygen indices of the all modified samples were reduced while char formation and meltdripping suppression were encouraged. The apparent melt viscosity and elasticity for the two polyesters were gained much with antidripping agent. Therefore, fluoropolymer improved char formation of the two polyesters based on the gaseous phase mechanism while the partial suppression of meltdripping behavior and the decrease of mechanical properties mainly originated from the increase of melt viscosity via fibrillation for pPET.     

Microstrip Interdigital Hairpin Resonator With an Optimal Physical Length

In this letter, we report a novel microstrip interdigital hairpin resonator by having the parallel coupled lines in a conventional miniaturized hairpin resonator replaced by an interdigital capacitor. Equations are derived in order to design the resonator with an optimal physical length. It will be proved that the novel resonator can achieve even more size reduction than the conventional miniaturized hairpin resonator owing to the employment of the slow-wave structure. Finally, a four-pole cross-coupled bandpass filter using the optimal resonator is fabricated as verification     

Modeling operation and microarchitecture concurrency for communication architectures with application to retargetable simulation

In multiprocessor-based system-on-chips (SOCs), optimizing the communication architecture is often as important as, if not more than, optimizing the computation architecture. While there are mature platforms and techniques for the modeling and evaluation of computation architectures, the same is not true for the communication architectures. A major challenge in modeling the communication architecture is managing the concurrency at multiple levels: at the operation level, multiple communication operations may be active at any time; at the microarchitecture level, several microarchitectural components may be operating in parallel. Further, it is important to be able to clearly specify how the operation-level concurrency maps to the microarchitectural-level concurrency. This paper presents a modeling methodology and a retargetable simulation framework which fill this gap. This framework seeks to facilitate the design space exploration of the communication subsystem through a rigorous modeling approach based on a formal concurrency model, the operation state machine (OSM). Our OSM-based modeling methodology enables the entire system including both the computation and communication architectures to be modeled in a single OSM framework. This allows us to develop a tool set that can synthesize cycle-accurate system simulators for multiprocessing-element SOC prototypes. We show that, by simulation, critical system information such as timing and communication patterns can be obtained and evaluated. Consequently, system-level design choices regarding the communication architecture can be made with high confidence in early stages of design.     

浅谈集成电路的废气处理

集成电路的工业废气有含氟化物、硫酸雾的酸性废气,含氨的碱性废气,含异丙醇、光刻胶的有机废气,含SiO_2的含尘废气,以及含硅烷、磷烷的工艺尾气等,这些工业废气中大部分成分是有毒有害的,必须进行有效的处理才能排入大气中。主要讨论上述工业废气的分类、处理方式、应用范围及应用实例等。