Endocytosis during postnatal differentiation in superficial cells of the mouse urinary bladder epithelium

This electron microscopical study was performed in order to follow the endocytic pathway of horseradish peroxidase and colloidal gold tracers and to determine the involvement of endocytosis in postnatal differentiation in superficial cells of the mouse urinary bladder epithelium. Morphometric analyses of late endosomes/multivesicular bodies from day of birth to day 25 were performed. The internalisation and intracellular transport of luminal plasmalemma to multivesicular bodies via endocytic vesicles, early endosomes and pleomorphic compartments was established. Dynamic changes in endocytic activity took place within the first few days of postnatal differentiation. During this period the number of multivesicular bodies changed in an inverse ratio to their size. After the third day endocytic activity gradually approached the low rate of adult urothelium.     

Radiation resistance of polymer materials

Affiliate of the L. Ya. Karpov Scientific-Research Institute of Physical Chemistry. Translated from Atomnaya énergiya, Vol. 76, No. 5, pp. 422–428, May, 1994.     

Compatibilizing PPE and PA6 with nitro-phthalimide derivatives

Compatibilization of poly(2,6-dimethyl (PPE) with 1,4 phenylene-ether) PA6 has been achieved in two steps: first, (PPE) was functionalized with N-methyl-4-nitro-phthalimide; then, functionalized PPE was allowed to react, by melt blending, with the amine end group of PA6, giving a trans-imidation product. The reaction path was followed by torque measurements in a Brabender apparatus and the products characterized by infrared (i.r.) and nuclear magnetic resonance (NMR) spectroscopy. The above PPE/PA6 blends, modified with a suitable rubbery component (Kraton G), showed a remarkable Izod impact strength value, compared to the uncompatibilized mixture (170 versus 30 Jm^–1). The maximum impact values were obtained with 1.65% functionalized PPE.     

Optical properties and laser performance of neodymium doped fluoroapatites SrxCa5−x(PO4)3F (x = 0, 1, 2, 3, 4, and 5)

Nd doped fluoroapatites Sr_xCa_5−x(PO₄)₃F(S_xC_5−xPF, X = 0, 1, 2, 3, 4, and 5) single crystals have been grown by the Czochralski technique. Their polarized absorption and emission spectra have been recorded at room temperature and used to calculate the absorption and stimulated emission cross sections. Broadening of the absorption and emission bands is observed for Nd³⁺ in the solid solutions SPF-CPF compared to Nd³⁺ in CPF or SPF. 1% Nd:S_xC_5−xPF, X = 0, 2, 3, 4, and 5, laser rods have been tested in a cavity longitudinally pumped by a 1 W AlGaAs laser diode and compared to Nd:YAG and Nd:YVO₄ rods. All fluoroapatites exhibit very good laser performance with low thresholds and high slope efficiencies, higher than in the case of YAG and equal to the YVO₄ samples. The dependance of the laser output power versus the diode temperature has also been measured for all materials. The laser output was found to be as sensitive to the diode temperature fluctuations for fluoroapatites as for YAG.     

D-KAT: a deep knowledge acquisition tool

Abstract: This paper describes a system of shallow and deep knowledge acquisition and representation for diagnostic expert systems. The acquisition system is integrated into a diagnostic expert system shell. Shallow knowledge is represented in a failure model as a set of cause-effect relations among the possible faults, while deep knowledge is represented in three deep models: a functional, a deep causal and a taxonomic model. The acquisition and the representation of all the models are fully integrated. The deep knowledge is used by the final expert system in order to provide the user with deep explanations of the cause-effect relations of the failure model.     

Removal of endocrine disrupting chemicals (EDCs) using low pressure reverse osmosis membrane (LPROM).

Endocrine disrupting chemicals (EDCs) are the focus of current environmental issues, as they can cause adverse health effects to animals and human, subsequent to endocrine function. The objective of this study was to remove a specific compound of EDCs (i.e. pentachlorophenol, C(6)OCL(5)Na, molecular weight of 288 g/mol) using low pressure reverse osmosis membrane (LPROM). A cross flow module of LPROM was used to observe the effects of operating parameters, i.e. pH, operating pressure and temperature. The design of the experiment was based on MINITAB(TM) software, and the analysis of results was conducted by factorial analysis. It was found that the rejection of pentachlorophenol was higher than 80% at a recovery rate of 60 to 70%. The rejection was subjected to increase with the increase of pH. The flux was observed to be increased with the increase of operating pressure and temperature. This study also investigated the interaction effects between operating parameters involved.     

The prediction of solute transport in surcharged manholes using CFD.

Solute transport processes occur within a wide range of water engineering structures, and urban drainage engineers increasingly rely on modelling tools to represent the transport of dissolved materials. The models take as input representative travel time and dispersion characteristics for key system components, and these generally have to be identified via field or laboratory measurements. Computational Fluid Dynamics (CFD) has the potential to reveal the underlying hydraulic processes that control solute transport, and to provide a generic means of identifying relevant parameter values. This paper reports on a study that has been undertaken to evaluate the feasibility of utilising a CFD-based approach to modelling solute transport. Discrete phase modelling has been adopted, as this is computationally efficient and robust when compared with the time-dependent solution of the advection-dispersion equation. Simulation results are compared with published laboratory data characterising the dispersion effects of surcharged manholes, focusing specifically on an 800 mm diameter laboratory manhole for a flowrate of 0.002 m(3)/s and a range of surcharge depths. Preliminary indications are that the CFD results adequately replicate the measured downstream temporal concentration profiles, and that a threshold surcharge depth, corresponding to a change in hydraulic regime within the manhole, can also be identified.     

Qualitätssicherung bei Gemüse am Beispiel von Erzeugergroßmärkten

Zusammenfassung. Durch ein von Erzeugern und Vermarktern getragenes regionales Qualit?tssicherungsprogramm bei Gemüse konnten H?chstmengenüberschreitungen innerhalb von 5 Jahren um vier Fünftel gesenkt und entsprechend die Verkehrsf?higkeit der vermarkteten Partien erh?ht werden. Durch eine optimal organisierte Probenahme bereits vor der Ernte und Analytik innerhalb von zwei Tagen waren nicht vermarktungsf?hige Partien rechtzeitig zu erkennen. Die Nutzung der Analysenergebnisse als Beratungsinstrument durch Markt, Erzeuger und Beratung haben zu diesem Erfolg geführt.     

An assessment of the θ-projection method for the representation and extrapolation of creep data for a 1%Cr, 12%Mo, 14%V steel tested at 565°C

Constant stress creep data for a wrought 1%Cr, $\text{1}\text{2}\text{\%}\text{Mo}$, $\text{1}\text{4}\text{\%}\text{V}$ steel obtained from six tests carried out at 565°C have been fitted and extrapolated using the θ-projection method. Creep curves for high stresses were fitted well, but curves extrapolated to stress levels below those used in the θ-projection did not represent well the available data for primary-secondary creep. To enable a satisfactory extrapolation of results, it was found necessary to redefine the failure condition to be less sensitive to the shape of the latter sections of the tertiary creep curve. This was achieved by defining lifetime as the point on the curve at which the strain rate reached a fixed multiple of the creep rate at half the rupture time. The extrapolated data compare well with the results of tests carried out independently on a cast 1%Cr, $\text{1}\text{2}\text{\%}\text{Mo}$, $\text{1}\text{4}\text{\%}\text{V}$ steel. The extrapolation procedure not only predicts the ‘knee’ in the log stress-log lifetime curve but allows extrapolation of lifetimes by over a factor of thirty. In addition, acceptable predictions have been made of constant load experimental data.     

An efficient heuristic for scheduling batches of parts in a flexible flow system

Flexible manufacturing systems (FMSs) are a class of automated systems that can be used to improve productivity in batch manufacturing. Four stages of decision making have been defined for an FMS—the design, planning, scheduling, and control stages. This research focuses on the planning stage, and specifically in the area of scheduling batches of parts through the system.The literature to date on the FMS planning stage has mostly focused on the machine grouping, tool loading, and parttype selection problems. Our research carries the literature a step further by addressing the problem of scheduling batches of parts. Due to the use of serial-access material-handling systems in many FMSs, the batch-scheduling problem is modeled for a flexible flow system (FFS). This model explicitly accounts for setup times between batches that are dependent on their processing sequence.A heuristic procedure is developed for this batch-scheduling problem—the Maximum Savings (MS) heuristic. The MS heuristic is based upon the savings in time associated with a particular sequence and selecting the one with the maximum savings. It uses a two-phase method, with the savings being calculated in phase I, while a branch-and-bound procedure is employed to seek the best heuristic solution in phase II. Extensive computational results are provided for a wide variety of problems. The results show that the MS heuristic provides good-quality solutions.