Multistage Zeolite Drying for Energy-Efficient Drying

This work discusses the potential of three multistage zeolite drying systems (counter-, co-, and cross-current) with a varying number of stages. The evaluation showed that for 2-4 stages with heat recovery the efficiency of the systems ranges between 80 and 90%. Additionally, by introducing a compressor, the latent heat in the exhaust air from the regenerator is recovered and used to heat the inlet air for an additional drying stage. As a result, for the counter-current drying system and compressor pressure 1.5-2 bar, a maximum energy efficiency of 120% is achieved, which results in halving the energy consumption compared to conventional drying systems.     

New high-efficiency low-waste technology at the Vyksa Metallurgical Plant for operating metallurgical equipment with the use of Kompaks® monitoring systems

Introduction of the BER? KOMPAKS® automated system at the Vyksa Metallurgical Plant to safely and efficiently manage the operation of the plant’s equipment has allowed the facility to begin operating that equipment based on real-time evaluations of its actual physical condition. Introduction of the new system has also allowed better coordination of repair-scheduling with ongoing production operations, significantly improved the reliability and readiness of the equipment for operation at 100% capacity, completely eliminated the human factor from the process of monitoring the condition of equipment, and made it possible to check the quality and timeliness of equipment maintenance and repair work so as to ensure safe, efficient operation of the entire production complex.     

Guest Editors' Introduction: Attacking Functional Verification through Hybrid Techniques

Hybrid techniques are effective for exploring interesting corner cases, coverage holes, invariant variations, and so forth, in the general area of directed functional validation. However, despite the emergence of several effective hybrid validation techniques, several questions still remain. The five articles in this special issue help explain some of the different facets of this area.     

Influence of stage of cycle, corpus luteum location, follicle size, and number of large follicles on estradiol-17 beta concentrations in bovine follicles

Concentrations of estradiol-17 beta in follicular fluid were correlated to follicular size, stage of estrous cycle, location of corpus luteum, and presence of large follicles. Paired ovaries were obtained from 481 nonpregnant cows at slaughter and follicles were classified as ipsilateral or contralateral to the corpus luteum. Follicular fluid estradiol-17 beta concentrations from 2494 small, 1485 medium, and 396 large follicles were quantified by radioimmunoassay. Stage of estrous cycle was estimated by visual examination of the corpus luteum. Follicles in stage 1 of the estrous cycle (d 1 to 4) had the highest estradiol-17 beta concentration and the smallest mean follicular diameter. Location of follicles relative to the corpus luteum had no influence on estradiol-17 beta concentrations. As follicular size increased, concentration of estradiol-17 beta also increased. The presence of a single large follicle did not affect the concentration of estradiol-17 beta in medium or small follicles. In contrast, if multiple large follicles occurred in the same cow, concentrations of estradiol-17 beta were significantly lower in medium but not small follicles.     

High-temperature sensible-heat storage options

Alkali-metal carbonate salts meet the requirements for high-temperature solar central receiver systems, but because of their corrosiveness they present special problems in the design of storage tanks. In order to reduce corrosion and temperature sufficiently to retain strength in the storage containing wall, internal and thermal insulation is required. We present design options and operation criteria for sensible-heat, molten-salt storage with internal insulation.     

A technique for controlling the placement of the thin area in electrojetpolished tem foils of tungsten

Recently we have been making extensive use of TEM observations of grain boundaries in a research program concerned with the deformation behavior of tungsten bicrystals. A major problem in this research involved the preparation of thin foils which contained the grain boundary in the electron tranparent region, since standard cell type electrojetpolishing techniques do not allow adequate control of the placement of the thin area. Since the grain boundary comprises a very small percentage of a foil, good thin area placement control is critical to obtaining useful samples consistently. Masking techniques which use electrically insulating lacquers are not precise enough to guarantee the position of the thin area. However, we have found that one can use the dishing characteristic of the jetpolisher (i.e., the fact that the center of the foil thins faster than the perimeter) in conjunction with the masking technique to predict the position of the thin area within a preferentially thinned region created by the masking procedure outlined below. This is the essence of the procedure outlined below.     

Considerations on ex-vessel corium behavior: Scenarios, MCCI and coolability

The aim of this editorial article is to provide some structuring of the subject addressed in this part of the issue, which, in the view of the present authors, has not that clearly been reached by the specific contributions. Ex-vessel corium behavior is a wide field. Therefore, classification of the goals of investigations within a safety philosophy is especially required to get not lost in detailed aspects. The overall goals here are the coolability and retention options under ex-vessel conditions. Based on scenario considerations generally addressing risks and options, general principles of cooling and retention devices are outlined. Since the concrete erosion by melt yields a major risk and has to be considered in the concepts and devices, and also since several contributions to this part are dealing with specific aspects of this molten core-concrete interaction (MCCI), a large part of this editorial paper concerns the status of knowledge and modeling and the lines of research in this area. The status and the perspectives of codes is especially addressed by own contributions of one of the authors with the GRS code WEX and with MEDICIS, both codes included in the European integral code ASTEC. Finally, the coolability questions are discussed with respect to the different concepts in general and those addressed specifically in the present contributions. In some considerations, gas production by erosion plays a role to produce porous or particulate debris and thus to enhance coolability. Water injection from bottom is a more direct and probably more effective measure to reach this, specifically designed in the COMET core catcher concept. Specific contributions in this part deal with this concept, which is most closely related to the general subject of the present issue.     

Analysis of the turbine deblading in an HTGR with the CATHARE code

The direct coupling of a Gas Cooled Reactor (GCR) with a closed gas-turbine cycle leads to a specific dynamic plant behaviour. This behaviour is described and illustrated through computer analyses performed at CEA with the computer code CATHARE. This analysis requires a 1D code able to simulate the whole reactor, including the core, the vessel, the piping and the components (turbine, compressors, heat exchangers).This paper is devoted to deblading accidents. The problems and solutions encountered in various types of gas-turbines are presented: aero engines, steam turbines (EDF-Porcheville steam turbine accident feedback) and finally the feedback from previous High Temperature Gas Reactor experiments (EVO helium loop, HHT project and other HTR projects) are displayed. From this literature survey, some recommendations are drawn for a future High Temperature Reactor. It is shown that for safety reasons in case of deblading, a horizontal shaft aligned with the reactor vessel is recommended for the turbomachinery.This paper presents simulations of different scenarii performed with CATHARE code:

(a) Turbine deblading with and without reactor trip. In these calculations, a pessimistic assumption has been made: all turbine blades break off.

(b) Total flow blockage. The flow area is entirely blocked by the turbine blades.

(c) Partial flow blockage. Previous conclusions consider the worst cases of deblading and total flow blockage. An intermediate case based on a partial deblading has also been performed.

CATHARE results illustrate that the loss of turbine blades is accompanied by abrupt changes in the Power Conversion System and reactor flow conditions: large axial pressure drop, reverse flow through the core and high rate de-pressurization.