μC／OS—Ⅲ在Cortex—M3处理器上的移植

为了将μC／OS-Ⅲ移植到Cortex—M3处理器上,选用RealView MDK作为软件开发平台,针对Cortex—M3处理器特性编写了移植所需的C语言和汇编语言源代码,并验证了移植的正确性。移植后的μC／OS-Ⅲ能够稳定运行于Cortex～M3处理器上。该移植对大部分Cortex—M3处理器具有通用性,对其他架构处理器的μC／OS-Ⅲ移植具有参考作用。     

A best possible deterministic on-line algorithm for minimizing makespan on parallel batch machines

We study on-line scheduling on parallel batch machines. Jobs arrive over time. A batch processing machine can handle up to B jobs simultaneously. The jobs that are processed together form a batch and all jobs in a batch start and are completed at the same time. The processing time of a batch is given by the processing time of the longest job in the batch. The objective is to minimize the makespan. We deal with the unbounded model, where B is sufficiently large. We first show that no deterministic on-line algorithm can have a competitive ratio of less than 1+(?{m²+4}-m)/21+(\sqrt{m^{2}+4}-m)/2 , where m is the number of parallel batch machines. We then present an on-line algorithm which is the one best possible for any specific values of m.     

Adaptive synchronization of the complex dynamical network with double non-delayed and double delayed coupling

To simulate more realistic networks, we introduce a complex dynamical network model with double non-delayed and double delayed coupling and further investigate its synchronization phenomenon in this paper. Based on Lyapunov stability theory, adaptive synchronization criteria is obtained. Analytical result shows that under the designed adaptive controllers, the complex dynamical network with double non-delayed and double delayed coupling can asymptotically synchronize to a given trajectory. What is more, the coupling matrix is not assumed to be symmetric or irreducible. Finally, simulation results show the method is effective.     

降膜蒸发过程的数值模拟和传热传质分析

利用CFD软件对逆流降膜蒸发过程进行了实验模拟研究,研究了速度边界层、热边界层和浓度边界层的变化对降膜蒸发传热传质特性的影响规律;通过建立一维逆流降膜蒸发的数学方程编程求解出了对流传热传质的Nu数和Sh数,利用Fluent软件模拟出的实验结果采用回归分析得出了气液流量比Raw、流道的长宽比αL、空气进口无量纲温度θai以及空气进口Re数与Nu数、Sh数之间的无量纲关系式,可为降膜蒸发换热器的设计提供参考。     

变风量空调的自适应Smith控制仿真研究

变风量空调系统总是保持送风温度恒定,通过改变送入房间的风量来满足室内负荷的变化.但由于送风温度控制系统进行热交换时存在纯延时特性,而且由于实际的送风温度控制回路受多种因素的影响,会使系统模型也发生变化,对送风温度的恒温控制造成一定的难度.针对送风温度控制系统的纯延时和模型时变特性,为使送风温度达到准确平稳的目的,提出了一种自适应Smith预估的控制算法,在Matlab上对系统进行仿真,得到了在不同参数时自适应调节的数字仿真过程,结果表明,改进算法改进了控制质量,具有较强的鲁棒性.     

雷达模拟器目标威胁度评估方法研究

研究雷达模拟器目标威胁度的准确评估问题,是辅助操作手对空中目标进行打击的重要依据.威胁度普通雷达是难以探测的.由于目标的速度、距离等随机性强,具体数据难以确定.针对威胁度评估问题,多限于权重分析、聚类分析等方法,对难以确定的参数有较大依赖.为解决上述问题,提出应用效能指数的方法来确定未知目标对雷达阵地的威胁度,根据雷达能够获取的数据,得出判断矩阵,实现对雷达所测数据的分析,并评估目标的威胁度.上述方法可用于雷达模拟器,能够灵活地根据情况调整威胁度评估方法.实验结果表明,方法能够较好地在某些属性未知的情况下,可对目标威胁度进行准确评估,证明改进方法为威胁度评估提供了有效依据.     

基于群智能混合算法的物流配送路径研究

针对物流车辆路径优化问题,考虑到基本蚁群算法有收敛速度慢、易陷入局部最优的缺点,采用了一种双种群蚁群算法,在蚁群的基础上引入差分进化(DE)和粒子群算法(PSO)。通过在PSOAS种群和DEAS种群之间建立一种信息交流机制,使信息能够在两个种群中传递,以免某一方因错误的信息判断而陷入局部最优点。通过matlab仿真实验测试,表明该群智能混合算法可以较好地解决TSP的问题。     

Parallel Algorithms for Image Template Matching on Hypercube SIMD Computers

This correspondence presents several parallel algorithms for image template matching on an SIMD array processor with a hypercube interconnection network. For an N by N image and an M by M window, the time complexity is reduced from O(N2M2) for the serial algorithm to O(M2/K2 + M * log2 N/K + log2 N * log2 K) for the N2K2-PE system (1 ? K ? M), or to O(N2M2/L2) for the L2-PE system (L ? N). With efficient use of the inter-PE communication network, each PE requires only a small local memory, many unnecessary data transmissions are eliminated, and the time complexity is greatly reduced.     

铸态及快淬态无钴AB5型贮氢合金的循环稳定性

对AB5型LaxMm1-x(NiMnSiAlFe)49(x=0,0.45,0.75,1.00,摩尔分数)贮氢合金进行了快淬处理,研究了La含量及快淬工艺对合金微观结构及电化学循环稳定性的影响.结果表明:La含量的增加对铸态合金的循环稳定性没有明显影响,但使快淬态合金的循环稳定性下降,且快淬处理能显著提高合金的循环稳定性.当La替代量从0增加到1.00时,经300次充放循环后,铸态合金的容量保持率(Rh)从59.2%增加到59.8%;16 m/s淬速快淬态合金的容量保持率从83.9%下降到65.0%.对于x=0.45的合金,当淬速从0(铸态被定义为淬速等于0)增加到28 m/s时,容量保持率从59.8%增加到75.8%.     

Continuous electromagnetic separation of inclusion from aluminum melt using alternating current

A novel scheme about the continuous electromagnetic purification of aluminum melt was put forward based on the utilization of a square separation pipe and a 50 Hz alternating current to produce electromagnetic force. It is experimentally found that with electrical current of 400 A/cm^2, it takes only 10 s to remove 95% inclusion from aluminum melt. Comprehensive numerical simulations were carried out to investigate the dynamics mechanisms behind the process. The results show that the removal of inclusion is attributed to the cooperative effects of electromagnetic buoyancy and the secondary flow induced by the rotational electromagnetic force, and the removal efficient increases with the size of inclusion and the electrical current imposed. Theoretical predictions on the distribution and removal efficiency of inclusion were supported by the experiments.