氧化锌分散体光反应产生的自由基中间体

溶液中光诱导的电子转移反应已进行了大量的研究。而半导体粉末在水相或非水溶剂中的光化学研究也与自俱增。这种光化学与成像体系、太阳能转换以及光催化或污物的光降解有关。因此,越来越引起人们的重视。 Harbour和Hair用自旋捕捉技术研究了在ZnO-H_2O的分散体系中光合成过氧化氢,并检测到羟基自由基。他们认为氧化锌可能通过水的氧化将O_2还原成H_2O_2,从而使太阳能转换成化学能。人们自然会想到ZnO在其它溶剂中是否-也能观察到溶剂光氧化     

FeS2@TiO2 nanorods as high-performance anode for sodium ion battery

Sodium-ion battery (SIB) is an ideal device that could replace lithium-ion battery (LIB) in grid-scale energy storage system for power because of the low cost and rich reserve of raw material. The key challenge lies in developing electrode materials enabling reversible Na⁺ insertion/desertion and fast reaction kinetics. Herein, a core-shell structure, FeS₂ nanoparticles encapsulated in biphase TiO₂ shell (FeS₂@TiO₂), is developed towards the improvement of sodium storage. The diphase TiO₂ coating supplies abundant anatase/rutile interface and oxygen vacancies which will enhance the charge transfer, and avoid severe volume variation of FeS₂ caused by the Na⁺ insertion. The FeS₂ core will deliver high theoretical capacity through its conversion reaction mechanism. Consequently, the FeS₂@TiO₂ nanorods display notable performance as anode for SIBs including long-term cycling performance (637.8 mA·h·g^-1 at 0.2 A·g^-1 after 300 cycles, 374.9 mA·h·g^-1 at 5.0 A·g^-1 after 600 cycles) and outstanding rate capability (222.2 mA·h·g^-1 at 10 A·g^-1). Furthermore, the synthesized FeS₂@TiO₂ demonstrates significant pseudocapacitive behavior which accounts for 90.7% of the Na⁺ storage, and efficiently boosts the rate capability. This work provides a new pathway to fabricate anode material with an optimized structure and crystal phase for SIBs.     

多孔塑料管材挤出工艺和机头模具

扼要介绍了多孔塑料管材的用途、性能、制造方法、配方、生产工艺和机头模具的设计     

Electrodeposition of Ni-transition alloys for the oxygen evolution reaction

The oxygen evolution reaction (OER) is the anodic reaction in several industrial electrolytic processes. The objective of this work was to develop a new electrocatalytic material for long-lasting and economical high performance electrodes. New electrodes were prepared by electrodeposition of nickel, nickel-ruthenium and nickel-iridium alloys. They were then activated by anodic polarization at 100 mA cm^–2 to form an oxide layer. The electrocatalytic activity was characterized for the OER in 5M KOH solution. The results show that nickel-iridium alloys provide greater electrocatalytic activity for the OER and better corrosion resistance than nickel-ruthenium in alkaline solution. The effects of transition elements on improving the performance of the nickel electrode are then discussed.Notation b Tafel slope - i _ex exchange current density - i _dp electrodeposition current density - i _OER oxygen evolution reaction current density - C _dl double-layer capacity - o₂ oxygen overpotential     

用循环伏安法研究醌亚胺的脱氨反应

用循环伏安法研究了N,N-二乙基对苯二胺,N,N,N′,N′-四乙基对苯二胺,N,N-二乙基氨基酚三类化合物的电化学氧化及其氧化产物的后继化学反应,求算了脱氨反应速率常数,揭示了苯环上甲基取代基和氮原子上不同取代基对脱氨反应的影响。 脱氨反应为OH~-或水进攻醌亚胺的亲核反应。由于甲基的斥电子效应,当苯环上引进甲基取代基时,环上负电荷增大,带正电荷的醌亚胺趋于稳定,水解反应速度减慢。 苯环上引进二个甲基取代基,其相应的苯胺化合物的半波电位下降大约120mV。二乙基对苯二胺的苯环上每引进一个甲基取代基,其氧化产物与彩色成色剂偶合生成的染料的吸收峰向长波方向移动20—30nm。     

PVC／PU合金的制备与研究

叙述了选择混炼型聚氨酯(PU)与分子量适中的Ⅱ型聚氯乙烯(PVC)树脂制备PVC/PU合金的过程,讨论了PVC/PU共混比、填充剂、硫化体系、共混工艺等因素对PVC/PU合金性能的影响。结果表明:选择PVC/PU=60/40(质量比),硫化剂TD15份,白炭黑30份,混炼温度140—160℃,可制得性能优良的PVC/PU合金。动态力学性能实验显示了PVC/PU合金有较好的相容性。     

合成氢化松香乙酯的新工艺研究

以DRC为催化剂,在无溶剂条件下,通过氢化松香与乙醇的直接酯化反应合成氢化松香乙酯。探索了反应温度、催化剂用量、反应时间、物料配比等因素对反应酯化率的影响,确定最佳反应条件为:反应温度180℃,催化剂用量为原料氢化松香质量的6%,反应时间6h,醇与酸的摩尔比为3∶1。在最佳条件下酯化率达92.2%。还探讨了用阴离子交换树脂柱层析分离纯化氢化松香乙酯粗产物的方法。此外,利用红外光谱对氢化松香乙酯精制产物进行了表征;用GC-MS分别对氢化松香乙酯粗产物及其精制产物进行了定性和定量分析,比较了柱层析前后化学组成的变化。     

新型层状表面相锆基固体酸催化酯化反应研究

将所研制的层状表面相锆基固体酸催化剂用于一元、二元醇醋酸酯和其他羧酸酯类产品的合成 ,考察了其催化性能。研究发现 :层状表面相锆基固体酸催化剂对所考察的酯化反应具有很好的普遍适用性 ,但其酯化率与醇的性质和结构密切有关。催化反应动力学研究表明乙酸与丁醇、戊醇、己醇的酯化反应均为二级反应 ,且反应活化能均较低 ,分别为 47 4kJ/mol、2 3 3kJ/mol和 19 8kJ/mo     

环氧树脂-聚丙烯酸酯乳液型复合薄膜粘合剂

本文主要叙述了环氧-丙烯酸酯聚合乳液的合成,以及该乳液粘合剂的配制;讨论了该乳液粘合剂的粘合性能及耐水、耐溶剂性能。     

聚氨酯丙烯酸酯紫外光固化PVC涂料的研制

通过对涂料不同组分的种类及配比进行调节,制备不同配方的PVC清漆。在测试附着力、硬度、耐温、耐水性能的基础上,优化涂料配方,并配制出性能优异的PVC清漆涂料。