Algal ecology and composition in the Garmat ali river,Iraq

Planktonic, epipelic and epiphytic algae were studied monthly, during the period from January to December 1985 in the Garmat ali river, a naturally regulated river draining to the al-Hammar marsh, Iraq. Chlorophyll-a, primary productivity and water quality variables were also measured. High light penetration was noticed during the winter and spring. The water is oligohaline, alkaline and very hard. Reactive nitrate was found in higher concentrations than nitrite, and there were low concentrations of reactive phosphate. Two peaks were noticed for chlorophyll-a concentrations during spring and autumn, whereas only one occurred during autumn for primary productivity. The study area may be characterized as typically mesotrophic. A total of 154 species of algae was identified, including 65, 89, 98 and 77 species of plankton, epipelic and epiphytic algae on Potamogeton lucens and on Ceratophyllum demersum, respectively. Only 25 species were common to all the different communities. Diatoms were the dominant group in the epipelic and epiphytic algae during the study period, as well as in the plankton during spring and autumn. Seasonal variations were clear in the total cell numbers of algae from different habitats.     

Influence of Chemical Reaction on Mass Transport in Yield Stress Exhibiting Flow Regime

Theoretical Foundations of Chemical Engineering - In this study, the simulations for first-order chemical reactions (constructive and destructive) in the flow of the Casson fluid with...     

Prediction of warp and weft yarn crimp in cotton woven fabrics

The aim of this study was to develop statistical models for the prediction of warp and weft crimp percentage of cotton woven fabrics. The developed models are based on the empirical data obtained from carefully developed 60 fabric samples with different yarn linear densities, fabric densities, and weave designs. The predictability and accuracy of the developed models was assessed by correlation analysis of the predicted and actual crimp values of another set of eight fabric samples which was not used for the development of models. The results show fairly good capability and accuracy of the prediction models.     

Light microscopy of Pakistani Berberis leaf cuticles and its taxonomic implications

Taxonomy of the genus Berberis is quite complex, due to overlapping morphological characters, making it very difficult to differentiate the species within the genus. In order to resolve this taxonomic complexity, the foliar anatomy of 10 Berberis L. species was carried out, for the first time from Pakistan, using light microscopy (LM). Significant variation in terms of epidermal cells shape, size, cell wall pattern, and stomata type was observed. B. baluchistanica has the largest epidermal cells, Adaxial: length = 45–(53.9 ± 3.6)–62.5 μm; and width = 22.5–(26.3 ± 1.3)–30 μm; Abaxial: length = 37.5–(43.25 ± 2.5)–50 μm; and width = 20–(22.6 ± 0.8)–25. The highest number of stomata was observed in B. glaucocarpa as 62 on the abaxial surface while the lowest number of stomata was recorded in B. baluchistanica as 8 on the adaxial surface. Of 10 investigated species, 6 possess anomocytic type stomata, while 2 species that is, B. aitchisonii and B. parkeriana have both anomocytic and anisocytic stomata while B. baluchistanica and B. calliobotrys have only paracytic type stomata. The highest number of cells per unit area was present on the adaxial surface of B. calliobotrys ranging from 245–(252.4)–260 followed by B. parkeriana with 209–(227.8)–250 on the abaxial surface. Stomatal index (SI) also varied considerably and was the lowest (2.6) percentage in B. baluchistanica and highest (31.9) percentage in B. kunawurensis. A taxonomic key based on micro‐morphological characters is provided for species identification.     

Improving Wheat Productivity in Pakistan: Econometric Analysis Using Panel Data from Chaj in the Upper Indus Basin

Abstract

Increasing water scarcity, degradation of land and water resources, continuing low agricultural productivity, and increasing populations are posing the largest ever challenges for development of agricultural economies in many developing countries including Pakistan. Using panel data from irrigated settings in Chaj sub-basin of the Indus basin in Pakistani Punjab, we attempt to: (a) analyze the causes of low productivity; (b) disentangle factors (both land, water and other factors) contributing to productivity variations; and (c) identify limits and opportunities for narrowing productivity gaps and increasing overall wheat production, with a view to enhance food security for the poor. The results of the study indicate that locational inequities in distribution of canal water, use of groundwater of varying quality, differences in use of seed varieties, and other inputs lead to significant variations in wheat productivity. Key implications are that large gains in wheat productivity are possible by (a) improving the production environment at the tail-end through integrated water management practices; (b) adjusting the mix of canal and groundwater use; and (c) using technological interventions to improve the adoption of modern wheat varieties and dissemination of knowledge on planting dates and timings and application rates of inputs, especially water and fertilizer. Not only such interventions are economically, financially, and environmentally desirable, they are also pro-poor. What is needed is a strong political will and commitment.     

Glucose-sensitive holographic sensors for monitoring bacterial growth

A glucose sensor comprising a reflection hologram incorporated into a thin, acrylamide hydrogel film bearing the cis-diol binding ligand, 3-acrylamidophenylboronic acid (3-APB), is described. The diffraction wavelength (color) of the hologram changes as the polymer swells upon binding cis-diols. The effect of various concentrations of glucose, a variety of mono- and disaccharides, and the alpha-hydroxy acid, lactate, on the holographic response was investigated. The sensor displayed reversible changes in diffraction wavelength as a function of cis-diol concentration, with the sensitivity of the system being dependent on the cis-diol tested. The effect of varying 3-APB concentration in the hydrogel on the holographic response to glucose was investigated, and maximum sensitivity was observed at a functional monomer concentration of 20 mol %. The potential for using this holographic sensor to detect real-time changes in bacterial cell metabolism was demonstrated by monitoring the germination and subsequent vegetative growth of Bacillus subtilis spores.     

Synthesis of carbon nano-fibers on p-Si having improved temperature sensing capability

Synthesis of an innovative material for temperature sensor based on carbon nano-fibers (CNFs) on p-Si substrates has been demonstrated. The CNF films were characterized by SEM, Raman and FTIR studies. First order Raman spectra indicated a G band at ～1597 cm^?1 corresponding to the E_2g tangential stretching mode of an ordered graphitic structure with sp² hybridization and a D band located ～1350 cm^?1 originated from disordered carbon. Gold fingers were deposited on the p-Si/CNF surface for resistance measurement. Temperature sensing properties were also investigated critically. Resistance changes with temperature (ΔR/R) in p-Si/CNF films are found to be significantly large 30–60% Very stable, reproducible and improved temperature sensing properties would make this material superior to commonly available temperature sensors.     

Single-crystal oxoborate (Pb3O)2(BO3)2WO4: Growth and characterization

An oxoborate, (Pb₃O)₂(BO₃)₂WO₄, has been prepared by solid-state reaction methods below 620 °C. Single-crystal XRD analysis shows that it crystallizes in the orthorhombic group Cmcm with a = 18.480(4) Å, b = 6.3567(13) Å, c = 11.672(2) Å, Z = 4. The crystal structure is composed of one-dimensional 1/∞ [Pb₃O]⁴⁺ chains formed by corner-sharing OPb₄ tetrahedra. BO₃ and WO₄ groups are located around the chains to hold them together via PbO bonds. The IR spectra further confirmed the presence of BO₃ groups. Furthermore we have performed theoretical calculations by employing the all-electron full potential linearized augmented plane wave (FP-LAPW) method to solve the Kohn Sham equations. Starting from our XRD data we have optimized the atomic positions by minimizing the forces. These are used to calculate the electronic band structure, the atomic site-decomposed density of states, electron charge density and the chemical bonding features. The calculated electronic band structure and densities of states suggest that this oxoborate possesses a wide energy band gap. The valence band maxima and the conduction band minima are located at Y point in the Brillouin zone resulting in a direct energy band gap of 2.3 eV using the local density approximation and 2.6 eV for the Engel–Vosko generalized gradient approximation. This compares well with our experimentally measured energy band gap of 2.9 eV. From our calculated electron charge density distribution, we obtain an image of the electron clouds that surround the molecules in the unit cell of the crystal. The chemical bonding features were analyzed and the substantial covalent interactions are observed between Pb and O, B and O and W and O atoms.