In situ observation of dynamic elastic modulus in polypyrrole actuators

Polypyrrole is a leading conducting polymer actuator, but the factors that influence its performance when actuated under load in devices (such as the polymer stiffness) are not yet fully understood. To this end, we have probed the dynamic elastic modulus of polypyrrole in situ during actuation in a variety of electrolytes. As part of this study, we demonstrate that the electroactive response in dilute 1-butyl-3-methylimidazolium hexafluorophosphate can be changed from cation- to anion-dominated by adjusting the applied potential waveform. We observe that when conservative electrochemical conditions are applied in order to avoid dual ion movement or significant transfer of neutral solvent, the stiffness is determined by level of counterion swelling. The elastic modulus decreases during the net influx of ions into the bulk polymer and increases as these ions are expelled, regardless of whether the electroactive response is cation- or anion-dominated or whether there is a neutral solvent present in the electrolyte. This effect is quite significant, and we have observed up to a 3× increase in elastic modulus upon actuation in neat 1-butyl-3-methylimidazolium hexafluorophosphate.     

Effects of carbon fillers on the thermal conductivity of highly filled liquid‐crystal polymer based resins

The thermal conductivity of insulating polymers can be increased by the addition of conductive fillers. One potential market for these thermally conductive resins is for fuel cell bipolar plates. In this study, various amounts of three different carbon fillers (carbon black, synthetic graphite particles, and carbon fiber) were added to Vectra A950RX liquid crystal polymer. Because the resulting composites were anisotropic, they were tested for both through‐plane and in‐plane thermal conductivities. The effects of single fillers and combinations of the different fillers were studied via a factorial design. Each single filler caused a statistically significant increase in composite through‐plane and in‐plane thermal conductivities at the 95% confidence level, with synthetic graphite causing the largest increase. All of the composites containing combinations of the different fillers caused statistically significant increases in the composite through‐plane and in‐plane thermal conductivities. It is possible that thermally conductive pathways were formed that linked these carbon fillers, which resulted in increased composite thermal conductivity. Composites containing 70, 75, and 80 wt % synthetic graphite and the composite containing all three fillers (2.5 wt % carbon black, 65 wt % synthetic graphite, and 5 wt % carbon fiber) had in‐plane thermal conductivities of 20 W m^?1 K^?1 or higher, which is desirable for bipolar plates. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Characterization of Apo-Form Selective Inhibition of Indoleamine 2,3-Dioxygenase**

Indoleamine-2,3-dioxygenase 1 (IDO1) is a heme-containing enzyme that catalyzes the rate-limiting step in the kynurenine pathway of tryptophan (TRP) metabolism. As it is an inflammation-induced immunoregulatory enzyme, pharmacological inhibition of IDO1 activity is currently being pursued as a potential therapeutic tool for the treatment of cancer and other disease states. As such, a detailed understanding of the mechanism of action of IDO1 inhibitors with various mechanisms of inhibition is of great interest. Comparison of an apo-form-binding IDO1 inhibitor (GSK5628) to the heme-coordinating compound, epacadostat (Incyte), allows us to explore the details of the apo-binding inhibition of IDO1. Herein, we demonstrate that GSK5628 inhibits IDO1 by competing with heme for binding to a heme-free conformation of the enzyme (apo-IDO1), whereas epacadostat coordinates its binding with the iron atom of the IDO1 heme cofactor. Comparison of these two compounds in cellular systems reveals a long-lasting inhibitory effect of GSK5628, previously undescribed for other known IDO1 inhibitors. Detailed characterization of this apo-binding mechanism for IDO1 inhibition might help design superior inhibitors or could confer a unique competitive advantage over other IDO1 inhibitors vis-à-vis specificity and pharmacokinetic parameters.     

Identification of Tumor Antigens in Ovarian Cancers Using Local and Circulating Tumor-Specific Antibodies

Ovarian cancers include several disease subtypes and patients often present with advanced metastatic disease and a poor prognosis. New biomarkers for early diagnosis and targeted therapy are, therefore, urgently required. This study uses antibodies produced locally in tumor-draining lymph nodes (ASC probes) of individual ovarian cancer patients to screen two separate protein microarray platforms and identify cognate tumor antigens. The resulting antigen profiles were unique for each individual cancer patient and were used to generate a 50-antigen custom microarray. Serum from a separate cohort of ovarian cancer patients encompassing four disease subtypes was screened on the custom array and we identified 28.8% of all ovarian cancers, with a higher sensitivity for mucinous (50.0%) and serous (40.0%) subtypes. Combining local and circulating antibodies with high-density protein microarrays can identify novel, patient-specific tumor-associated antigens that may have diagnostic, prognostic or therapeutic uses in ovarian cancer.     

Preparation and characterization of biodiesel produced from fish oil

This study evaluated the production of biodiesel using fish oil as raw material. Two-stage alkaline-catalysis transesterification was performed with 6/1 molar ratio of methanol to oil at 55°C in the presence of 1 wt. % base amount of potassium hydroxide (KOH). The fuel properties of the biodiesel were further analyzed. The characterizations of the produced biodiesel showed that it met ASTM D 6751 standard with respect to acid number, flash point, water and sediment, free and total glycerin, sulfur content, distillation temperature, etc. It was found that cold soak and oxidative stability were out spec due to the high amount of polyunsaturated fatty acid present in the fish oil. However, through blending with used cooking oil biodiesel, in spec biodiesel fuel could be achieved.     

AN EXAMINATION OF ASTM PROCEDURES FOR DETERMINING SULFUR FORMS IN COAL

Several raw coals of various ranks were used to examine the effects of some of the variations in ASTM procedures on analytical results obtained for total sulfur and sulfur forms. ASTM procedures were also used to determine pyritic sulfur in two coals cleaned by selective agglomeration processes.In addition, organic sulfur values obtained by the indirect ASTM procedure were compared to those obtained directly by leaching coal with hot HNO3 followed by total sulfur determinations on the coal residue.

Differences in the ASTM leaching procedure with HNO3 did not significantly affect the pyritic sulfur results for any of the coals. However, small differences between the referee (leaching coal with HNO3) versus alternate (leaching coal ash with HCl) ASTM procedures for determining pyritic sulfur were observed.Neithei: procedure was consistently higher than the other.     

Co‐optimization of SnS absorber and Zn(O,S) buffer materials for improved solar cells

Thin‐film solar cells consisting of earth‐abundant and non‐toxic materials were made from pulsed chemical vapor deposition (pulsed‐CVD) of SnS as the p‐type absorber layer and atomic layer deposition (ALD) of Zn(O,S) as the n‐type buffer layer. The effects of deposition temperature and annealing conditions of the SnS absorber layer were studied for solar cells with a structure of Mo/SnS/Zn(O,S)/ZnO/ITO. Solar cells were further optimized by varying the stoichiometry of Zn(O,S) and the annealing conditions of SnS. Post‐deposition annealing in pure hydrogen sulfide improved crystallinity and increased the carrier mobility by one order of magnitude, and a power conversion efficiency up to 2.9% was achieved. Copyright © 2014 John Wiley & Sons, Ltd.