On the Relation of Job Insecurity,Job Autonomy,Innovative Work Behaviour and the Mediating Effect of Work Engagement

European policy is focusing on innovation as a way out of the economic crisis. At the same time, job insecurity is rising as Europe is still in crisis. In this paper, we examine whether job insecurity affects the innovative work behaviour of employees by focusing on the relation between job insecurity, job autonomy, work engagement and innovative work behaviour (IWB). Using employee level survey data, we use structural equation modelling to disentangle the relations between these variables. The partially mediated model shows the best fit with the data. This model shows that job insecurity and autonomy are both directly and indirectly, through work engagement, related with IWB. For autonomy these relations are positive, while they are negative (and smaller) for job insecurity. Moreover, a negative covariance is observed between job insecurity and autonomy.     

Aluminium electrodeposition from AlCl3-NaCl melts on glassy carbon,platinum and gold electrodes

The electrochemical deposition and dissolution of aluminium on glassy carbon, platinum and gold electrodes in chloraluminate melts have been investigated using linear sweep voltammetry and potentiostatic pulse techniques. It was shown that deposition of aluminium on the glassy carbon electrode at low overpotentials takes place by 3-D progressive nucleation and growth, with the incorporation of atoms in the crystal lattice as the rate-determining step. At overpotentials higher than –100 mV vs Al, in the melts containing more than 52 mol % of AlCl₃, diffusion of Al₂Cl ₇ ^– , takes over the control of deposition of aluminium. Alloying of platinum and gold electrodes with aluminium from the melt occurs in the underpotential region.     

Characterisation of cut and chip behaviour for NR,SBR and BR compounds with an instrumented laboratory device

ABSTRACT

Understanding the cut and chip (CC) effect in rubber is important for successful product development for tires used in off-road or poor road conditions and for other demanding applications of rubber. This research describes a laboratory testing method for characterising the CC fracture behaviour of rubber using a device that controls and records multiple applied loads and displacements during cyclic impact to the surface of a solid rubber specimen to mimic and quantify the CC damage experienced by tire tread compounds. To study the capabilities of the instrument, three model compounds were studied that are based on carbon black reinforced compounds of common elastomers used in tire treads: natural rubber (NR), styrene-butadiene rubber (SBR), and butadiene rubber (BR). These polymers have well-established CC tendencies in field performance of tire treads, with NR exhibiting the best CC resistance followed by SBR and finally BR. The same trend was found with the rubber impact testing approach that allowed the CC behaviour to be quantified using a new physical parameter which is the CC propensity (P). The relative ranking for CC resistance for the three compounds followed the fatigue crack growth resistances of the materials but was exactly opposite to the ranking of DIN abrasion resistance. This provides evidence that CC damage from impact by mm-scale asperities and abrasion of rubber against μm-scale asperities exhibit distinct characteristics in rubber.     

Effect of temperature on the separation of some Δ9-cis-trans isomers of methyl esters of fatty acids by open tubular gas chromatography

The influence of temperature on the gas chromatographic separation ofcis-trans isomers of the methyl esters of some monounsaturated fatty acids was studied on capillary columns coated with Apiezon L, BDS and DEGS. As far as methyl oleate and methyl elaidate are concerned, the separation is better at lower temperatures on Apiezon L (180–210 C) and at higher temperatures on polyester phases (BDS, DEGS; 150–180 C). The influence of temperature on the separation ofcis-trans isomers on the three stationary phases under study is explained by the higher values of δECL/δt forcis isomers. The variation of the equivalent carbon chain length with temperature can be used for the identification ofcis-trans isomers in natural mixtures.     

The participation of block copolymers in the increase in the number of tie molecules

Three-block copolymers polyamide-block-polyX-block-polyamide (where X is styrene, ethylene-co-1-butene, and others) are able to improve substantially the toughness of poly(ϵ-caprolactam). Outer blocks of these copolymers are able to take part in folding lamellae of semi-crystalline polyamide, inner blocks are not. They operate as a spacer, meaning that the end blocks of copolymers capable of folding become parts of different lamellae, or that the unfoldable part of a block copolymer is pushed out of a folding lamella with a certain probability of the remaining outer block taking part in folding another lamella. This increases the number of tie-molecules.     

Preparation and characterization of PVA/OMMT composites

In this study, polyvinyl alcohol/organically modified montmorillonite (HDA/MMT; organoclay) composite was prepared for the intercalation processes. Firstly, the rheological behavior of aqueous montmorillonite dispersions was investigated as a function of solid content. Hexadecylamine (HDA) was added to the montmorillonite dispersion (2%, w/w) in different concentrations in the range of 5 × 10^?4 – 9 × 10^?3 mmol/L. The basal spacing of the organoclay (OMMT) was studied by X‐ray diffraction. The FTIR spectra are obtained from the modified montmorillonite products, which revealed the characteristic absorbencies after treatment with HDA. HDA/MMT/PVA composite, which was produced by the reaction of 1 wt % PVA solution with organoclay complex, is characterized by the rheology, electrokinetic, XRD, FTIR, and SEM techniques. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:2315–2323, 2006     

The potentiometric behaviour of copolymers of methacrylic acid in water-ethanol solutions

Summary The synthesis is reported of copolymers of styrene with methacrylic acid and of methyl methacrylate with methacrylic acid by radical copolymerization, of copolymers of methyl methacrylate with methacrylic acid by partial alkaline hydrolysis of poly(methyl methacrylate), and of block copolymers of styrene with methacrylic acid. Modified titration curves of all these copolymers were recorded in water and water-ethanol solutions. In a solution containing 50 mass.% ethanol, only small differences could be observed between the potentiometric behaviour of the individual copolymers and polymethacrylic acid. Also, there were no essential differences in any of the solvents used between the potentiometric behaviour of block copolymers of styrene with methacrylic acid, on the one hand, and polymethacrylic acid, on the other. On the contrary, maxima and minima were always observed on the modified titration curves of statistical copolymers with a higher content of the hydrophobic comonomer in solutions with a high water content. Thus, using the modified titration curves, it is possible to decide whether a given copolymer is of the block or statistical type.     

Microstructure and physical properties of transparent thoria-yttria ceramics

The investigation of microstructure, some electrical and optical parameters of transparent ThO₂-15 mol % yo_1.5 ceramics has shown: (a) a very low porosity, close to zero; (b) a higher electrical conductivity than is usual for ThO₂ ceramics of the same composition, with the activation energy 1.12 eV; (c) a relative permittivity _r 33 under the given conditions; (d) confirmation of a single-phase fluorite-type cubic structure by means of Raman and infrared spectra.     

Fusion of smartphone sensor data for classification of daily user activities

Multimedia Tools and Applications - New mobile applications need to estimate user activities by using sensor data provided by smart wearable devices and deliver context-aware solutions to users...     

Conceptualization,measurement, and application of semantic transparency in visual notations

Numerous visual notations are present in technical and business domains. Notations have to be cognitively effective to ease the planning, documentation, and communication of the domains’ concepts. Semantic transparency (ST) is one of the elementary principles that influence notations’ cognitive effectiveness. However, the principle is criticized for not being well defined and challenges arise in the evaluations and applications of ST. Accordingly, this research’s objectives were to answer how the ST principle is defined, operationalized, and evaluated in present notations as well as applied in the design of new notations in ICT and related areas. To meet these objectives, a systematic literature review was conducted with 94 studies passing the selection process criteria. The results reject one of the three aspects, which define semantic transparency, namely “ST is achieved with the use of icons.” Besides, taxonomies of related concepts and research methods, evaluation metrics, and other findings from this study can help to conduct verifiable ST-related experiments and applications, consequently improving the visual vocabularies of notations and effectiveness of the resulting diagrams.