A case of using the Semantic Interoperability Framework for custom orthopedic implants manufacturing

The efficiency and effectiveness of the daily practice in orthopedic surgery depend on the availability, interoperability and unique access to a wide set of information, related to the patient’s medical record and diagnosis, domain knowledge and available resources and staff. The most important of the tangible resources, needed for the therapeutic or preventive actions are orthopedic implants. In some cases, the implants may be highly complex and customized products, which need to be manufactured (assembled) on basis of the above information in a shortest possible timeframe. In this paper, the case of the custom orthopedic implants manufacturing is described from the perspective of the collaborative enterprising, with special consideration of the interoperability issues of the involved enterprise collaboration. It is shown how the previously developed Semantic Interoperability Framework can be used to improve the efficiency of the manufacturing and other relevant processes.     

Phase Diagram for the 0.4Pb(Ni1/3,Nb1/3)O3–0.6Pb(Zr,Ti)O3 Solid Solution in the Vicinity of a Morphotropic Phase Boundary

A phase diagram based on dielectric-permittivity-versus-temperature measurements and high-temperature X-ray diffractometry was proposed for 0.4Pb(Ni_1/3,Nb_1/3)O₃- x PbZrO₃-(0.6- x )PbTiO₃ (0.2 lessthan equal to x lessthan equal to 0.32) relaxor-ferroelectric solid solution, and a morphotropic phase boundary that sharply bends toward zirconium-rich compositions was found. A spontaneous normal-to-relaxor ferroelectric transition was also observed when heating was performed for all the compositions tested near the morphotropic phase boundary. Additional considerations about previously published phase diagrams for Pb(Zn_1/3,Nb_2/3)O₃-PbTiO₃ and Pb(Mg_1/3,Nb_1/3)O₃-PbTiO₃ might lead to an extension of the presented diagram to these compositions.     

“Quinone Millipedes” Reconsidered: Evidence for a Mosaic-Like Taxonomic Distribution of Phenol-Based Secretions across the Julidae

The defensive chemistry of juliformian millipedes is characterized mainly by benzoquinones (”quinone millipedes”), whereas the secretions of the putative close outgroup Callipodida are considered to be exclusively phenolic. We conducted a chemical screening of julid secretions for phenolic content. Most species from tribes Cylindroiulini (15 species examined), Brachyiulini (5 species examined), Leptoiulini (15 species examined), Uncigerini (2 species examined), Pachyiulini (3 species examined), and Ommatoiulini (2 species examined) had non-phenolic, in most cases exclusively benzoquinonic secretions. In contrast, tribes Cylindroiulini, Brachyiulini, and Leptoiulini also contained representatives with predominantly phenol-based exudates. In detail, p-cresol was a major compound in the secretions of the cylindroiulines Styrioiulus pelidnus and S. styricus (p-cresol content 93 %) and an undetermined Cylindroiulus species (p-cresol content 51 %), in the brachyiulines Brachyiulus lusitanus (p-cresol content 21 %) and Megaphyllum fagorum (p-cresol content 92 %), as well as in an undescribed Typhloiulus species (p-cresol content 32 %, Leptoiulini). In all species, p-cresol was accompanied by small amounts of phenol. The secretion of M. fagorum was exclusively phenolic, whereas phenols were accompanied by benzoquinones in all other species. This is the first incidence of clearly phenol-dominated secretions in the Julidae. We hypothesize a shared biosynthetic route to phenols and benzoquinones, with benzoquinones being produced from phenolic precursors. The patchy taxonomic distribution of phenols documented herein supports multiple independent regression events in a common pathway of benzoquinone synthesis rather than multiple independent incidences of phenol biosynthesis.     

Characteristics and Formation Mechanism of BaTiO3 Powders Prepared by Twin-Fluid and Ultrasonic Spray-Pyrolysis Methods

Spherical fine (micrometer and submicrometer in size) homogeneous BaTiO₃ powders were synthesized from ethanol: water solutions of BaCl₂ and TiCl₄ using the spray-pyrolysis technique. Two different atomizers—twin-fluid and ultrasonic, with a resonant frequency of 2.5 × 10⁶ Hz—were used for mist generation. Hollow spherical particles containing a certain amount of unreacted BaCl₂ phase and having a mean particle diameter of 2.5 μm were obtained at 1173 K using a twin-fluid atomizing system. Decomposition of precursors and their transition to the cubic BaTiO₃ phase occurred, even at 973 K in the case of the ultrasonic atomizing system. For the initial droplet size of 2.2 μm and residence time of ∼60 s, spherical BaTiO₃ particles with the mean particle diameter of 0.53 μm were obtained. A BaTiO₃ formation mechanism has been proposed as a reaction between TiO₂ and BaCl₂ rather than a reaction of oxides.     

Densitometric determination of zinc bacitracin and nystatin in animal feed

BACKGROUND: The European Union has forbidden the use of antibiotics as additives in animal feed. Zn‐bacitracin (Zn‐BC) and nystatin (NYS) were frequently used for their growth‐promoting effects and for feed conversion in poultry, pigs and cattle. An HPTLC method has been developed for separating Zn‐BC and NYS in the mixture, for routine quality control. RESULTS: The separation was obtained using RP‐18 F_254S coated HPTLC plates with acetonitrile/methanol (equal volumes):toluene:KH₂PO₄/KOH (buffer, pH 6.8) = 57:3:40 (v/v/v), adjusted with HCl to pH 8.2, as a mobile phase. The densitograms were monitored at 192, 215 and 305 nm and both antibiotics were assayed at 215 nm. The method was shown to be specific, accurate (recoveries were 98.7 ± 0.5% and 104.8 ± 0.7% for Zn‐BC and NYS, respectively), linear over the tested range (correlation coefficients, 0.9982 and 0.9884), and precise (intermediate precision RSD below 2.2% for both analytes) with efficient separation (R_s = 3.5). CONCLUSION: The method was applied for determining Zn‐BC and NYS as additives in spiked matrices of commercial animal feedstuffs. According to LOD values for each antibiotic, the minimum detectable amount in feed is 4.5 and 5.5 ppm of Zn‐BC and NYS, respectively. Copyright © 2008 Society of Chemical Industry     

Integration of reconfigurable inspection with stream of variations methodology

This paper describes an advanced closed loop quality control methodology for reconfigurable manufacturing systems. The methodology enables rapid root-cause diagnostics for faster ramp-up of reconfigurable systems through integration of the Reconfigurable Inspection Machine (RIM) and the Stream of Variations (SoV) methodology. The RIM enables reconfigurable, rapid, and accurate inspection using non-contact sensors while the SoV methodology is used to quickly analyze the measurements and identify the root-cause of the errors produced during machining.The feasibility of the industrial concept was experimentally validated. A machining error was introduced during machining of an engine head. Measurement information collected by the RIM was processed and used to locate the root-cause of the error using the SoV methodology.     

Fast evaluation of dynamic changes of electric power systems frequency during primary control

The paper presents the development of a simple method for the fast and sufficiently accurate assessment of dynamic changes of power systems frequency during the time period of primary control. Also, this model gives corresponding values of the total mechanical power of synchronous generators, during the some period. The development of a proposed low-order system frequency response model is based on the main assumption of uniform movement of generators, which enables representation of the power system through an equivalent controlled synchronous machine. The characteristics of the developed method were determined on an example of a real electric power system and a comparison was made with the results of a stricter approach.