Effect of microencapsulation and spray drying on oxidative stability of flaxseed oil and its release behavior under simulated gastrointestinal conditions

Flaxseed oil is one of the richest sources of omega-3 fatty acid (α-linolenic acid, ALA). It contains high amounts of polyunsaturated fatty acids, making it extremely susceptible to oxidation. In the present study, flaxseed oil was stabilized using microencapsulation followed by spray drying and studied for its oxidative stability in terms of peroxide value (PV), thiobarbituric acid, and p-anisidine value at room temperature (35 ± 1°C) and low temperature (4–7°C) storage for 6 months. Results revealed that the developed flaxseed oil powder was stable throughout the storage period and PV remained below to the maximum permissible limit (≤5 mEq/kg oil) prescribed by the Codex Alimentarius Commission. The fatty acids profile measured by gas–liquid chromatography indicated a 14.28–15.13% decrease in ALA content in flaxseed oil as a result of microencapsulation and storage at room temperature. In vitro digestion behavior of microcapsules showed 4.39 ± 0.53 to 19.87 ± 0.47% release of flaxseed oil under simulated gastric continued, whereas under gastrointestinal conditions it was 20.00 ± 3.66 to 59.99 ± 9.29%.     

Near‐Infrared Intraoperative Chemiluminescence Imaging

Intraoperative imaging technologies recently entered the operating room, and their implementation is revolutionizing how physicians plan, monitor, and perform surgical interventions. In this work, we present a novel surgical imaging reporter system: intraoperative chemiluminescence imaging (ICI). To this end, we have leveraged the ability of a chemiluminescent metal complex to generate near‐infrared light upon exposure to an aqueous solution of Ce⁴⁺ in the presence of reducing tissue or blood components. An optical camera spatially resolves the resulting photon flux. We describe the construction and application of a prototype imaging setup, which achieves a detection limit as low as 6.9 pmol cm^?2 of the transition‐metal‐based ICI agent. As a proof of concept, we use ICI for the in vivo detection of our transition metal tracer following both systemic and subdermal injections. The very high signal‐to‐noise ratios make ICI an interesting candidate for the development of new intraoperative imaging technologies.     

Fully-coupled simulations of thermally-induced cracking in pegmatite due to microwave irradiation

Fully-coupled thermo-mechanical simulations are implemented in COMSOL Multiphysics to investigate micro-scale stress-strain variability in pegmatite specimens subjected to thermal loading using microwaves. Thermally-induced compressive and tensile stresses increase as the microwave irradiation duration increases. The dielectric constant, coefficient of expansion, and type and size of mineralogical boundary have significant impacts on the responses of the rock to microwave irradiation. The maximum principal stress of the chlorite is the smallest, indicating that the chlorite experiences the most damage under microwave irradiation, followed by the quartz. The maximum principal stress values of plagioclase and orthoclase are larger, indicating that they are likely to incur the least damage. Where quartz or chlorite is dominant, the resulting von Mises stresses are consistently higher after 120 s of microwave irradiation. The rate of generation of von Mises stresses increases most rapidly along the interface between quartz and plagioclase, and the interface between quartz and orthoclase, followed by the interface between quartz and chlorite, and finally the interface between plagioclase and orthoclase. The presented modeling approach provides a practical method to investigate stress-strain relationships within mineralogical boundaries inside a rock thin section.     

Hydrodynamic behavior of inverse fluidized bed biofilm reactor for phenol biodegradation using Pseudomonas fluorescens

The hydrodynamic characteristic performance of an internal draft tube inverse fluidized bed biofilm reactor was studied for the aerobic biodegradation of phenol (1,200 mg/l) using Pseudomonas fluorescens for various ratios of settled bed volume to reactor working volume (V _b /V _r ) under batchwise condition with respect to liquid phase. The operating parameters, such as superficial gas velocity, phase hold ups, aspect ratio and bed height, were analyzed for different ratios of (V _b /V _r ). The effect of biodegradation on synthetic phenolic effluent was determined from the reduction in chemical oxygen demand and phenol removal efficiency. The optimum value of (V _b /V _r ) _m was 0.20 for the optimal superficial gas velocity, U _gm =0.220 m/s with the COD reduction efficiency of 98.5% in 48 hours. The biomass and biofilm characteristics of P. fluorescens were determined for optimal hydrodynamic operating parameters by evaluating its biofilm dry density and thickness, bioparticle density, suspended and attached biomass concentration.     

Heavy metal accumulation in vegetables irrigated with water from different sources

The present study was carried out to assess levels of different heavy metals like iron, manganese, copper and zinc, in vegetables irrigated with water from different sources. The results indicated a substantial build-up of heavy metals in vegetables irrigated with wastewater. The range of various metals in wastewater-irrigated plants was 116–378, 12–69, 5.2–16.8 and 22–46 mg/kg for iron (Fe), manganese (Mn), copper (Cu) and zinc (Zn), respectively. The highest mean levels of Fe and Mn were detected in mint and spinach, whereas the levels of Cu and Zn were highest in carrot. The present study highlights that both adults and children consuming vegetables grown in wastewater-irrigated soils ingest significant amount of these metals. However, the values of these metals were below the recommended maximum tolerable levels proposed by the [Joint FAO/WHO Expert Committee on Food Additives (1999). Summary and conclusions. In 53rd Meeting, Rome, June 1–10, 1999]. However, the regular monitoring of levels of these metals from effluents and sewage, in vegetables and in other food materials is essential to prevent excessive build-up of these metals in the food chain.     

Direct quantification of topological protection in symmetry-protected photonic edge states at telecom wavelengths

Topological on-chip photonics based on tailored photonic crystals(PhCs)that emulate quantum valley-Hall effeas has recently gained widespread interest owing to its promise of robust unidirectional transport of classical and quantum information.We present a direct quantitative evaluation of topological photonic edge eigenstates and their transport properties in the telecom wavelength range using phase-resolved near-field optical microscopy.Experimentally visualizing the detailed sub-wavelength structure of these modes propagating along the interface between two topologically non-trivial mirror-symmetric lattices allows us to map their dispersion relation and differentiate between the contributions of several higher-order Bloch harmonics.Selective probing of forward-and backward-propagating modes as defined by their phase velocities enables direct quantification of topological robustness.Studying near-field propagation in controlled defects allows us to extract upper limits of topological protection in on-chip photonic systems in comparison with conventional PhC waveguides.We find that protected edge states are two orders of magnitude more robust than modes of conventional PhC waveguides.This direct experimental quantification of topological robustness comprises a crucial step toward the application of topologically protected guiding in integrated photonics,allowing for unprecedented error-free photonic quantum networks。     

PHOTOCHEMICAL AND CHEMICAL TRANSFORMATION OF Calotropis procera LATEX TOWARDS OBTAINING VALUE ADDED CHEMICALS AND FUELS

ABSTRACT

Photothermal degradation of the latex obtained from Calotropis procera showed enhanced extraction in heptane up to 50%. Treatment of the latex with different concentrations of NaOH resulted in the reduction in heptane extraction of the latex. Treatment of latex with aqueous HC1 coagulated it and thus resulted in an increase in extraction yield. The ¹HNMR, ^l3CNMR and FTTR spectral analyses of treated latex showed an increase in the olefinic and carbonyl groups in the latex. Thus, this showed that photothermal treatments rendered the latex more amenable to hydrocracking for obtaining value added chemicals and fuels from the latex.     

Dynamic connectivity and path formation time in Poisson networks

The connectivity of wireless networks is commonly analyzed using static geometric graphs. However, with half-duplex radios and due to interference, static or instantaneous connectivity cannot be achieved. It is not necessary, either, since packets take multiple time slots to propagate through the network. For example, if a packet traverses a link in one time slot, it is irrelevant if the next link is available in that time slot also, but it is relevant if the next hop exists in the next time slot. To account for half-duplex constraints and the dynamic changes in the transmitting set of nodes due to MAC scheduling and traffic loads, we introduce a random multi-digraph that captures the evolution of the network connectivity in a dynamic fashion. To obtain concrete results, we focus on Poisson networks, where transmitters form a Poisson point process on the plane at all time instants. We first provide analytical results for the degree distribution of the graph and derive the distributional properties of the end-to-end connection delay using techniques from first-passage percolation and epidemic processes. Next, we prove that under some assumptions, the delay scales linearly with the source–destination distance even in the presence of interference. We also provide simulation results in support of the theoretical results.     

Comparison of Conventional and Cross-Layer Multimedia Transport Schemes for Wireless Networks

Three competing schemes have been proposed for multimedia transport over broadband wireless channels: (a) traditional UDP (Postel, The User Datagram Protocol, 1980 [1]), (b) semi-cross-layer UDP-Lite (The Lightweight User Datagram Protocol, 2004 [2]), and (c) cross-layer header estimation (Khayam et al., IEEE Transactions on Multimedia 9(2):377–385, 2007 [3]; Khayam and Radha, IEEE Transactions on Wireless Communications 6(11):3946–3954, 2007 [4]). In all these schemes, corrupted and lost packets are recovered using FEC at the application layer. In this paper, we analytically and experimentally compare the performances of these broadband wireless multimedia schemes. First, we derive lower bounds on the excepted FEC redundancy required by ideal cross-layer header estimation, UDP and UDP-Lite over an arbitrary-order Markov wireless channel. We show that under realistic wireless channel conditions, the cross-layer header estimation scheme always requires lesser redundancy than UDP and UDP-Lite. We then propose a practical minimum distance decoding (MDD) header estimation scheme, which is receiver-based, low complexity and highly accurate. Trace-driven multimedia experiments over wireless LANs demonstrate that MDD header estimation requires significantly lesser FEC redundancy and renders better video quality than existing schemes.     

Link Estimation and Routing in Sensor Network Backbones: Beacon-Based or Data-Driven?

In the context of IEEE 802.11b network testbeds, we examine the differences between unicast and broadcast link properties, and we show the inherent difficulties in precisely estimating unicast link properties via those of broadcast beacons even if we make the length and transmission rate of beacons be the same as those of data packets. To circumvent the difficulties in link estimation, we propose to estimate unicast link properties directly via data traffic itself without using periodic beacons. To this end, we design a data-driven routing protocol Learn-on-the-Fly (LOF). LOF chooses routes based on ETX/ETT-type metrics, but the metrics are estimated via MAC feedback for unicast data transmission instead of broadcast beacons. Using a realistic sensor network traffic trace and an 802.11b testbed of ~195 Stargates, we experimentally compare the performance of LOF with that of beacon-based protocols, represented by the geography-unaware ETX and the geography-based PRD. We find that LOF reduces end-to-end MAC latency by a factor of 3, enhances energy efficiency by a factor up to 2.37, and improves network throughput by a factor up to 7.78, which demonstrate the feasibility and the potential benefits of data-driven link estimation and routing.