Effects of Post-Weld Heat Treatment on the Microstructure and Toughness of Flash Butt Welded High-Strength Low-Alloy Steel

Metallurgical and Materials Transactions A - Effect of post-weld heat treatment on the weld microstructure, texture, and its correlation to the toughness of flash butt welded joints were...     

Towards Strong Nonapproximability Results in the Lov��sz-Schrijver Hierarchy

Lovász and Schrijver described a generic method of tightening the LP and SDP relaxation for any 0–1 optimization problem. These tightened relaxations were the basis of several celebrated approximation algorithms (such as for max-cut, max-3sat, and sparsest cut).     

Use of chalcopyrite semiconductors CuXSe2 (X=Al,Ga and In) in solar cells: a theoretical study

The energy of sunlight falling on surface of the earth can be directly converted into electricity by means of the solar cells. Among the various materials used for photovoltaics, the chalcopyrite compounds CuXSe₂ (X=Al, Ga, In) are very promising as semiconductors and have received much attention in the recent years. To check the applicability of these materials in solar cells, we have computed the energy bands, density of states, optical dielectric tensors, reflectivity, refraction and absorption coefficients using the full potential linearized augmented plane wave method. It is seen that the energy bandgap reduces from X=Al→In. The dielectric property of these materials is discussed in terms of interband transitions. The absorption coefficients of these materials in the region of solar radiation (0–5 eV energy) are discussed to explore their use in the fabrication of solar cells.     

Functional display of amylase on yeast surface from Rhizopus oryzae as a novel enzyme delivery method

Fungal amylase has great importance in fermentation industry such as brewing, food fermentation, starch hydrolysis and for improving microbial populations in chicken intestine through feed applications. In the present investigation, alpha amylase cDNA from Rhizopus oryzae was cloned, sequenced, and successfully surface anchored in functional form using Saccharomyces cerevisiae EBY100 as host, yielding enzyme activity of 4.35 (±0.5) U/ml. The surface displayed yeast expressed amylase activity using plate assay, produced glucose and maltose as hydrolysis products using starch as substrate. The targeted and armed yeast with displayed enzyme was evaluated for its characterization at various pH and temperatures. The engineered yeast showed optimal activity at neutral pH and at 50°C incubation temperature. Reducing sugars produced by displayed enzyme were visualized by paper chromatography. The data suggested successful heterologous expression and display of amylase enzyme on yeast cell surface. The displayed system could further be utilized in fermentation industry for improving cost-effectiveness of the process.     

A student project for layered network protocol development

A student project to accompany a course on computer interfacing and local area networks is described. The audience at which the course is aimed consists of beginning graduate students and seniors. The course addresses fundamental concepts in computer networks in general, and local networks in particular. Students are given the specification of a simple sliding window protocol that provides sequence control and error recovery over an unreliable data link. The task is to implement this protocol on the Apple Macintosh computer as a Layer-3 protocol using the services of the link access protocol (Layer 2) already existent on the machine as part of the Appletalk network. Typical implementations and the cost of benefits of utilizing inexpensive microcomputers for projects in the field of computer networks are discussed     

Protonic polymer gel electrolytes based on carboxylic acids: ortho and inductive effects

The conductivity of polymer gel electrolytes containing three aromatic and three aliphatic carboxylic acids has been studied, viz. (i) ortho-, meta- and para-hydroxybenzoic acids and (ii) oxalic, malonic and succinic acids. Polymeric gels were prepared by adding different wt% of polymer poly(methylmethacrylate) (PMMA) in solutions of respective acids in high dielectric constant organic solvent mixtures of propylene carbonate, ethylene carbonate and dimethylformamide. The highest conductivity in the first of the above group of acids is for o-hydroxy benzoic acid and oxalic acid in the second group of acids. Results have been explained on the basis of ortho and/or inductive effects which depend upon the relative positions of the substituted hydroxyl (–OH) and carboxyl (–COOH) group or that of the two carboxylic groups.     

Modeling the anomalous threshold voltage behavior of submicrometerMOSFET's

A simple yet accurate semi-empirical analytical model for simulating the anomalous threshold voltage behavior in submicrometer MOSFETs is reported. The increase in the threshold voltage with decreasing channel length has been modeled by assuming a bias-independent, but channel-length-dependent, fixed charge at the source and drain ends. The new model requires two extra parameters in addition to the usual short-channel threshold voltage model parameters. These two parameters represent the magnitude of the fixed charge and the length over which the charge is spread at the source and drain ends. The model shows excellent agreement with the experimental threshold voltage data (within 2%) for submicrometer devices with varying oxide thickness, junction depth, and channel doping concentration     

HYDROZEN TRANSFER HYDROCRAKING OF C.PROCERA UNDER AMBIENT PRESSURE CONDITIONS TO GET VALUE ADDED CHEMICALS AND FUELS

Biomass is renewable source of energy while the reserves of petroleum arc being depleted. The latex of a potential petrocrop, Colotropis procera, a lalicifcr, arid-plant which is rich in hydrocarbon type triterpene compounds etc. was found lo be a better feed slock for thermal hydrocracking as compared to whole plant biomass inlcrms of liquid product yield. Studies of chemical reaction dynamics of the thermal cracking of latex at 200-400°C showed that the process should be termed as hydrogen-tranfer (H-T) hydrocracking of latex under ambient pressure conditions. The hydrogen rich cracked trilcrpenoids act as the H-donors in this process, where nascent hydrogen atoms and free radicals chemically plug the cracked moities to stabilise these. Latex was also coagulated and the H-T hydrocracking of the feedstock coagulum gave a higher yield of cracked oil in comparision lo that from the dried latex. A model triterpene compound, ursolic acid has been subjected to H-T hydrocracking to understand the process of hydrocracking of latex under similar conditions and it was found that triterpencs on H-T hydrocracking produced only liquid and gaseous products and no solid char. The temperature for hydrocracking of latex has been optimized to 350°C and molecular sieve was round to catalyse the H-T Hytrocraking process to yield more liquid product The distillation range of cracked latex on(CLO)Obtained from H.T Hytrocracking of C procera Latex indicated that it can be used as fuel. Moreover CLO resembled diesel fuels and was predominantly paraffinic in nature as characterised by NMR and FTIR spectral analysis. A process has been recommended for gelling value added fuels and chemicals from C. procera latex.     

Experiences with network-based user agents for mobile applications

Wireless networks are characterized by simple end devices and limited bandwidth. One solution to address these and other limitations of the wireless mobile environment that has been widely pursued is the placement of proxies, or agents, inside the network to assist with application processing that would normally take place on end devices. These agents can additionally manipulate data to reduce bandwidth requirements and assist in providing services. The design and implementation of a user agent is heavily impacted by the application it supports. In this paper we present our experiences with user agents in two different types of applications: telephony-based Personal Communication Services (PCS) and two-way messaging. To provide low latency service, the PCS user agents are mobile so that they may be kept close to their end devices. The design of the PCS agents limits migration overhead to the transfer of approximately 100 bytes of information in about 150 milliseconds. To provide advanced messaging services, the messaging user agent supports flexible messages while limiting air interface bandwidth usage. The messaging agents reduce uplink bandwidth usage by approximately 35% when applied to a cellular PCS system, and reduce message payloads by 97%. This revised version was published online in June 2006 with corrections to the Cover Date.     

Characterization of information improvement due to N revisions and its generalization by a functional equation

The idea of information improvement was introduced by Thiel [3]. This idea was further extended by the first author to information improvement due to 2 and N revisions and specifically states that different experimenters (a finite number) are required to proceed with given distributions P and U and are permitted to choose a suitable revision. We attempted to provide a measure of information corresponding to Theil's measure which reflected the effect of all revisions. In this paper, the authors have studied a joint characterization of information improvement of N revisions and its generalization by considering a suitable functional equation.