Objective: The aim of this article is to compare the gravitational powder blend loading method to the tablet press and manual loading in terms of their influence on tablets’ critical quality attributes (CQA).
Significance: The results of the study can be of practical relevance to the pharmaceutical industry in the area of direct compression of low-dose formulations, which could be prone to content uniformity (CU) issues.
Methods: In the preliminary study, particle size distribution (PSD) and surface energy of raw materials were determined using laser diffraction method and inverse gas chromatography, respectively. For trials purpose, a formulation containing two pharmaceutical ingredients (APIs) was used. Tablet samples were collected during the compression progress to analyze their CQAs, namely assay and CU.
Results: Results obtained during trials indicate that tested direct compression powder blend is sensitive to applied powder handling method. Mild increase in both APIs content was observed during manual scooping. Gravitational approach (based on discharge into the drum) resulted in a decrease in CU, which is connected to a more pronounced assay increase at the end of tableting than in the case of manual loading.
Conclusions: The correct design of blend transfer over single unit processes is an important issue and should be investigated during the development phase since it may influence the final product CQAs. The manual scooping method, although simplistic, can be a temporary solution to improve the results of API’s content and uniformity when compared to industrial gravitational transfer. 相似文献
In addition to traditional Quality of Service (QoS), Quality of Experience (QoE) poses a real challenge for Internet service providers, audio-visual services, broadcasters and new Over-The-Top (OTT) services. Therefore, objective audio-visual metrics are frequently being dedicated in order to monitor, troubleshoot, investigate and set benchmarks of content applications working in real-time or off-line. The concept proposed here, Monitoring of Audio Visual Quality by Key Performance Indicators (MOAVI), is able to isolate and focus investigation, set-up algorithms, increase the monitoring period and guarantee better prediction of perceptual quality. MOAVI artefacts Key Performance Indicators (KPI) are classified into four categories, based on their origin: capturing, processing, transmission, and display. In the paper, we present experiments carried out over several steps with four experimental set-ups for concept verification. The methodology takes into the account annoyance visibility threshold. The experimental methodology is adapted from International Telecommunication Union – Telecommunication Standardization Sector (ITU-T) Recommendations: P.800, P.910 and P.930. We also present the results of KPI verification tests. Finally, we also describe the first implementation of MOAVI KPI in a commercial product: the NET-MOZAIC probe. Net Research, LLC, currently offers the probe as a part of NET-xTVMS Internet Protocol Television (IPTV) and Cable Television (CATV) monitoring system. 相似文献
The aim of the research was to determine the impact of developers, removers and solvents on the stability of ZnO nanofibers. Surface imaging of nanofiber morphology was studied using Scanning Electron Microscope. From the obtained results a set of factors which have the least influence on the etching of ZnO nanofibers during device processing was selected. The dependence of the grains size on the fibers robustness in the liquid solutions was investigated. It was found that the nanofibers calcinated at higher temperatures were more stable. This was due to the grain size of the fiber as the fibers calcinated at higher temperatures revealed larger grain size. The studies have shown that smaller grains were dissolved much faster, leaving the porous core of the ZnO nanofiber. 相似文献
The role of metal ions introduced to polymer matrix in the photochemical degradation of material is not fully understood. In this paper, we considered the effect of copper ions on the photochemical changes in Methafilcon A after UV-irradiation. The presence of methacrylic acid in the structure of Methafilcon A increases the loading capacity of these ions. In result, there is observed the production much more radicals after UV-irradiation than in pure matrix, without copper ions. When the time of UV-exposure increases, the EPR signal of trapped Cu(II) ions in the material decreases. This proves the transformation of Cu(II) to a diamagnetic state of stable Cu(I)-intermediates or copper oxides. Simultaneously, in the first 5-min of UV-irradiation there is observed a rapid increase in intensity of the radical signal, which disappears when the exposure time is extended. This mechanism of radical generating is quite different than for Methafilcon A matrix without copper ions. 相似文献
The study of mechanical properties and microstructure of friction welded coupe of ductile iron with stainless steel are presented. Scanning electron microscopy (SEM) was used for investigation of the fracture morphology and phase transformations taking place during friction welding process. It was concluded that in case of bainitic ductile iron (BDI) the fracture precedes mainly trough the cleavage planes. Moreover, the distribution of selected elements on both side of the joining interface was studied using EDS line and maps spectrometry. The EDS spectrometry showed some enrichment of ductile iron with Cr and Ni atoms close to the joint. The depth of Cr atoms penetration reached 50 μm. The heat generated locally by friction increased the temperature in the area close to the interface even over the melting point of ductile iron. This was confirmed by metallography which revealed the carbide eutectic enriched with Cr in ductile iron. 相似文献
The oxygen electrode reaction at the interface gold∣yttria stabilized zirconia was investigate using microelectrodes by chronoamperometry
and electrochemical impedance spectroscopy, with emphasis put on effect of prolonged polarization of the electrode. Two interesting
phenomena were observed: (a) generally, the long-lasting negative polarization resulted in a slow monotonous decrease of the
current flowing through the electrode, (b) the reaction mechanism was less complicated for the polarized then unpolarized
electrodes, which resulted in a relatively simply equivalent circuit used for modelling the former ones. On the basis of the
data obtained, the apparent exchange currents normalized vs. the three phase boundary length and Tafel slopes were determined.
The methods of determining the three phase boundary length were discussed. The reconnaissance data obtained for the Pt microelectrode
are also reported. 相似文献
We perform detailed numerical simulations of field ion microscopy images of faceted crystals and compare them with experimental observations. In contrast to the case of crystals with a smooth surface, for a faceted topography we find extreme deformations of the ion image. Local magnification is highly inhomogeneous and may vary by an order of magnitude: from 0.64 to 6.7. Moreover, the anisotropy of the magnification at a point located on the facet edge may reach a factor of 10. 相似文献
Ni–P matrix, ternary Ni–W–P and Ni–P–ZrO2 coatings, and quaternary Ni–W–P–ZrO2 coatings were deposited using electroless method from a glycine bath. Their corrosion resistance was evaluated by electrochemical impedance spectroscopy (EIS) for various immersion times in a 3.5% NaCl solution. From among the investigated coatings, the ternary Ni–W–P coatings show the highest resistance to corrosion in the first hour of exposure to the 3.5% NaCl medium. An addition of ZrO2 adversely affects the performance of both the Ni–P coatings and the Ni–W–P coatings. For all the coatings, including the ones containing tungsten, a marked decrease in pore resistance (Rpor) over time is observed. This means that their corrosion resistance and capacity to protect the substrate decline. On the other hand, after 24 h immersion in the 3.5% NaCl solution the Ni–W–P coating shows the highest low‐frequency impedance modulus (|Z|f = 0.01 Hz). As regards corrosion resistance, the Ni–P coatings and the Ni–W–P coatings perform best. 相似文献
In this article, current thinking on stresses in soldered joints of different physical and mechanical properties was appraised, as well as the possibilities for decreasing them with the use of different techniques, from technological experiments to numerical methods. The influence of individual factors on the size of stresses was analysed, including the solder gap size, the thicknesses of joined elements, area and soldered surface roughness, spacers, and compensation inserts as well as joint geometry. The results of numerical calculations of 2D models of soldered joints for different sizes of surfaces soldered at a constant width of solder gap were also presented. Particular attention was paid to stresses occurring in joints with large soldering surfaces. 相似文献