Morphology and surface properties of some siloxane–organic copolymers

BACKGROUND: It is well known that, due to their extremely low polarity, polysiloxanes are incompatible with almost any organic system. This incompatibility leads to phase separation in mixed siloxane–organic systems. RESULTS: Three siloxane–organic copolymers, poly[(5,5′‐methylene‐bis‐salicylaldehyde)‐imine‐(1,3‐bis(propylene)tetramethyldisiloxane)] (Paz1), poly[(2,5‐dihydroxy‐1,4‐benzoquinone)‐imine‐(1,3‐bis(propylene)tetramethyldisiloxane)] (Paz2) and poly[1,3‐bis(propylene)tetramethyldisiloxane diamide] (Pam), were prepared by the reaction of 1,3‐bis(3‐aminopropyl)tetramethyldisiloxane with appropriate organic partners (5,5′‐methylene‐bis‐salicylaldehyde, 2,5‐dihydroxy‐1,4‐benzoquinone and oxalyl chloride, respectively). The morphologies dictated by the incompatibility between siloxane and polar organic moieties were investigated using differential scanning calorimetry and scanning electron microscopy. The surface activity of the copolymers and water vapour sorption capacity were also measured. CONCLUSION: Even though the polar sequences are very short ones, the highly flexible siloxane‐containing sequence permits the self‐assembly of these into more or less polar domains. Such an organization influences the properties of the resulting materials, an important place being occupied by the surface properties. Copyright © 2009 Society of Chemical Industry     

Water-Based Graphene Oxide–Silicon Hybrid Nanofluids—Experimental and Theoretical Approach

In the current paper, a new hybrid nanofluid based on graphene oxide sheets and silicon nanoparticles is proposed for thermal applications. GO sheets and Si nanoparticles with different mixture ratios are dispersed in distilled water. Dynamic viscosity is measured at temperatures within the range 20–50 °C and the values are compared to the results available in the literature. The results indicated that the viscosity increases with increasing the mixture ratio of graphene oxide. A new correlation for the dynamic viscosity based on the experimental findings is proposed. Finally, the criteria for the performance of new hybrid nanofluid for thermal applications are analyzed.     

Acylierung von Heterocyclen mit Kohlensäurederivaten. I. Kinetik und Mechanismus der Reaktion von 2-Aminobenzimidazolen mit Arylcyanaten

Acylation of Heterocycles with Carbonic Acid Derivatives. I. Kinetics and Mechanism of the Reaction of 2-Aminobenzimidazoles with Aryl Cyanates The second order rate constants for the reaction of 2-amino-benzimidazoles (2-ABI) with aryl cyanates forming 2-amino-benzimidazole aryl ester imide 3 have been determined in dependence on substituent effects by u. v. measurements. The results are interpreted by a six-membered cyclic transition state in which the electrophilic attack of the cyanate on the endocyclic N atom is catalyzed by an H bridge interaction of the exocyclic amino group of 2-ABI with the OCN group.     

Heavy Metal Removal and Neutralization of Acid Mine Waste Water ‐ Kinetic Study

The influence of the apatite on the efficiency of neutralization and on heavy metal removal of acid mine waste water has been studied. The analysis of the treated waste water samples with apatite has shown an advanced purification, the concentration of the heavy metals after the treatment of the waste water with apatite being 25 to 1000 times less than the Maximum Concentration Limits admitted by European Norms (NTPA 001/2005). In order to establish the macro‐kinetic mechanism in the neutralization process, the activation energy, Ea, and the kinetic parameters, rate coefficient of reaction, k_r, and k_t were determined from the experimental results obtained in “ceramic ball‐mill” reactor. The obtained values of the activation energy Ea >> 42 kJ mol^?1 (e.g. Ea = 115.50 ± 7.50 kJ mol^?1 for a conversion of sulphuric acid η_H2SO4 = 0.05, Ea = 60.90 ± 9.50 kJ mol^?1 for η ^H2SO4 = 0.10 and Ea = 55.75 ± 10.45 kJ mol^‐1 for η ^H2SO4 = 0.15) suggest that up to a conversion of H2SO4 equal 0.15 the global process is controlled by the transformation process, adsorption followed by reaction, which means surface‐controlled reactions. At a conversion of sulphuric acid η ^H2SO4 > 0.15, the obtained values of activation energy Ea < 42 kJ mol^‐1 (e.g. Ea = 37.55 ± 4.05 kJ mol^‐1 for η ^H2SO4 = 0.2, Ea = 37.54 ± 2.54 kJ mol^‐1 for η ^H2SO4 = 0.3 and Ea = 37.44 ± 2.90 kJ mol^‐1 for η ^H2SO4 = 0.4) indicate diffusion‐controlled processes. This means a combined process model, which involves the transfer in the liquid phase followed by the chemical reaction at the surface of the solid. Kinetic parameters as rate coefficient of reaction, kr with values ranging from (5.02 ± 1.62) 10‐4 to (8.00 ± 1.55) 10‐4 (s^‐1) and transfer coefficient, kt, ranging from (8.40 ± 0.50) 10‐5 to (10.42 ± 0.65) 10‐5 (m s^‐1) were determined.     

A Review on Mycotoxins in Food and Feed: Malaysia Case Study

Fungi are distributed worldwide and can be found in various foods and feedstuffs from almost every part of the world. Mycotoxins are secondary metabolites produced by some fungal species and may impose food safety risks to human health. Among all mycotoxins, aflatoxins (AFs), ochratoxin A (OTA), trichothecenes, deoxynivalenol (DON and T‐2 toxin), zearalenone (ZEN), and fumonisins (FMN) have received much attention due to high frequency and severe health effects in humans and animals. Malaysia has heavy rainfall throughout the year, high temperatures (28 to 31 °C), and high relative humidity (70% to 80% during wet seasons). Stored crops under such conditions can easily be contaminated by mycotoxin‐producing fungi. The most important mycotoxins in Malaysian foods are AFs, OTA, DON, ZEN, and FMN that can be found in peanuts, cereal grains, cocoa beans, and spices. AFs have been reported to occur in several cereal grains, feeds, nuts, and nut products consumed in Malaysia. Spices, oilseeds, milk, eggs, and herbal medicines have been reported to be contaminated with AFs (lower than the Malaysian acceptable level of 35 ng/g for total AFs). OTA, a possible human carcinogen, was reported in cereal grains, nuts, and spices in Malaysian market. ZEN was detected in Malaysian rice, oat, barley, maize meal, and wheat at different levels. DON contamination, although at low levels, was reported in rice, maize, barley, oat, wheat, and wheat‐based products in Malaysia. FMN was reported in feed and some cereal grains consumed in Malaysia. Since some food commodities are more susceptible than others to fungal growth and mycotoxin contamination, more stringent prevention and control methods are required.     

ICI Reduction in OFDM Systems Using Phase Modified Sinc Pulse

This paper is focused on the problem of reducing the intercarrier-interference (ICI) power in the transmission over Orthogonal Frequency Division Multiplexing Systems (OFDM) using pulse shaping methods. A new pulse was proposed here and it was investigated in terms of ICI interference. It appears to be suitable for transmission in OFDM systems with carrier frequency offset. The results obtained by calculations show that the performance improvements are significant for reducing average intercarrier-interference (ICI) power and increasing the ratio of average signal power to average ICI power (SIR).     

Underapproximation of procedure summaries for integer programs

International Journal on Software Tools for Technology Transfer - We show how to underapproximate the procedure summaries of recursive programs over the integers using off-the-shelf analyzers for...     

Nanofiltration membranes for ionic liquid recovery

Nanofiltration membranes have been developed by interfacial polymerization using base PES ultrafiltration membranes. By varying the concentration of the reactive monomers present as well as the reaction conditions, the structure of the polymerized barrier layer has been modified. Here, the ability to concentrate low molecular weight sugars while allowing dissolved ionic liquids in aqueous solution to be recovered in the permeate has been investigated for application in biomass hydrolysis. The results obtained here indicate that the selectivity for 1-butyl-3-methylimidazoliumchloride (BmimCl) over glucose can be as high as 36.6. The membrane permeance was 2.31 L m^?2 h^?1 bar^?1.     

Organosoluble asymmetric aromatic polyamides bearing pendent phenoxy groups

This study focuses on the synthesis and characterization of new polyamides based on an aromatic asymmetric diamine‐containing phenoxy‐substituted benzophenone segment. Low‐temperature solution polycondensation reactions of this diamine with various aromatic diacid chlorides containing ether, hexafluoroisopropylidene or diphenylsilane groups resulted in polyamides with molecular weights in the range 102 900–113 200 g mol^?1. The structures of these monomers and the corresponding polymers were fully confirmed using elemental analysis and infrared and NMR spectroscopy. All polyamides were easily soluble at room temperature in polar aprotic solvents and even in less polar solvents such as tetrahydrofuran. The polymers showed excellent thermal stability, up to 385 °C, and displayed glass transition temperatures in the range 225–256 °C. All the polymers presented blue florescence upon irradiation with UV light and thus show promise for applications in electroluminescent devices. Copyright © 2011 Society of Chemical Industry     

Life cycle cost and energy analysis of a Net Zero Energy House with solar combisystem

The Net Zero Energy House (NZEH) presented in this paper is an energy efficient house that uses available solar technologies to generate at least as much primary energy as the house uses over the course of the year. The computer simulation results show that it is technically feasible to reach the goal of NZEH in the cold climate of Montreal. In terms of the life cycle energy use, which considers the operating and embodied energy of the house, the energy payback time is 8.4–8.7 years, when the NZEH is compared with an average house that complies with the provincial code. The energy payback ratio of the combisystem is 3.5–3.8 compared with the heating system of conventional house. By converting solar energy, the combisystem supplies at least 3.5 times more energy than the energy invested for manufacturing and shipping the system. The life cycle cost analysis of the NZEH shows, however, that due to the high cost of the solar technologies and the low cost of electricity in Montreal, financial payback is never achieved.