Synthesis and Characterization of Ti-Nb2O5 Catalysts for Discoloration Reaction of Bromophenol Blue and Indigo Carmine Dyes

Topics in Catalysis - This work investigated the photodegradation of bromophenol blue (BPB) and indigo carmine (IC) dye under UV–Visible light using pure oxides of titanium and niobium, as...     

Enhanced microbial oil production by activated sludge microorganisms via co‐fermentation of glucose and xylose

The co‐fermentation of glucose and xylose by activated sludge microorganisms for the production of microbial oils for use as biodiesel feedstock was investigated. Various carbon sources at initial concentration of 60 g/L and C:N ratio 70:1 were investigated: xylose, glucose, and 2:1 and 1:2 (by mass) glucose/xylose mixtures. Oil accumulation ranged between 12 to 22% CDW, the highest of which was obtained when xylose was the sole substrate used. Kinetic modeling of the fermentation data showed that specific growth and oil accumulation rates were similar in all substrate types and the lipid coefficient ranged from 0.02 to 0.06 g/g of sugar consumed. The fatty acid methyl ester yield and composition of the lipids showed their suitability for conversion to biodiesel. Based on the results, lignocellulose sugars could be used as fermentation substrates by activated sludge microorganisms for enhancing the oil content of sewage sludge for its use as a sustainable biofuel feedstock source. © 2013 American Institute of Chemical Engineers AIChE J, 59: 4036–4044, 2013     

Internal Mass Transfer during Isothermal Drying of a Porous Solid Containing Multicomponent Liquid Mixtures

Abstract

Internal mass transfer in a porous solid partially saturated with multicomponent liquids has been experimentally and theoretically studied. Isothermal drying experiments were performed using a jacketed wind tunnel where the transient composition profiles and total liquid content of a cylindrical sample were determined. Sand samples wetted with the ternary liquid mixtures water-methanol-ethanol and 2-propanol-methanol-ethanol were dried at two different initial compositions and temperatures. A mathematical model including mass transfer by capillary movement of the liquid and interactive diffusion in both gas and liquid phase was developed. To simulate the capillary movement of liquid mixtures, parameters experimentally determined for single liquids where weighed according to liquid composition. A fairly good agreement between theoretical and experimental liquid composition profiles was obtained provided that axial dispersion is included in the model.     

Reducing SO(2) in fresh pork burgers by adding chitosan

The use of 0.02 or 0.05% chitosan is proposed to reduce from 450 to 150mgkg(-1) the SO(2) required to preserve pork burgers aerobically packed and stored at 2°C for up to 21days under retail display conditions. The effects of chitosan and/or sulfite addition and the storage time were determined in fresh (color deterioration, lipid oxidation, pH, total viable counts, Escherichia coli and coliforms, Salmonella, appearance and odor) and cooked (appearance, odor, flavor and texture) burgers. The addition of either 0.02 or 0.05% chitosan was not detected by sensory analysis, and extended the shelf life of low-SO(2) burgers from 7 to 14days. Chitosan enhanced the preservative effects of sulfite at a low dose, acting on the main causes of meat deterioration (bacterial spoilage, color stability and lipid oxidation), and provided good sensory properties to fresh and cooked pork burgers.     

Effect of cavosurface angle beveling on the exposure angle of enamel prisms in different cavity sizes

The quality of the micromechanical retention between the enamel prisms exposed through acid etching and adhesive system can be influenced by the relationship between the angle of the exposed enamel prisms and the external surface/restorative material. Therefore, the aim of the present study was to determine the influence of the enamel cavosurface beveling in different cavity sizes on the angle relation between enamel prisms and the restorative material. For this research, 30 human permanent molars were used and divided into three groups according the isthmus aperture of class I cavities (1/4, 1/3, and 1/2 of the intercuspal distance). Cavosurface angle beveling was performed in each tooth buccal or palatal/lingual side, and a resin composite restoration was placed. Each restored tooth was sectioned in buccal/palatal direction followed by analysis in scanning electron microscope. Means of the angles observed between enamel prisms and the restorative material were registered and statistically analyzed by Kruskal‐Wallis test. Results showed higher mean angle values for beveled groups when comparing with the values observed in the unbeveled margins (p < .05) regardless of the isthmus aperture, being 1/4 (beveled = 48.36°; unbeveled = 20.71°), 1/3 (beveled = 39.75°; unbeveled = 29.15°), and 1/2 (beveled = 37.02°; unbeveled = 26.34°). It was also observed that in some unbeveled cavities, there were the presence of laterally exposed enamel prisms (0°), mainly in more conservative cavities. It was concluded that the presence of higher angles values occurred in the samples with beveled margins, without presence of laterally exposed enamel prisms.     

Leaf and stem micromorphology of Byrsonima sericea DC. by light and scanning electron microscopy

Micromorphological studies were carried out using multiple microscopic techniques on the leaves and stem bark of Byrsonima sericea DC. (Malpighiaceae), a species popularly known as “murici” and used medicinally, in order to identify both qualitative and quantitative features of leaf and stem anatomy and histochemistry as differential parameters to support both the quality control of its ethnodrugs and the taxonomy of the genus. The study was conducted using traditional techniques of plant anatomy, histochemical tests, and the stomatal index (SI). Byrsonima sericea has hypostomatic leaves, anomocytic stomata, and its epidermal walls are anticlinal and straight on the adaxial and curved on the abaxial faces. T‐shaped trichomes were observed mainly on the abaxial surface. The leaf epidermis showed waxes syntopism on both surfaces, with the occurrence of different crystalloid forms on a single phylloplane. The mesophyll is dorsiventral, with 3‐4 collateral vascular bundles. Phenolic compounds, starch, and proteins were identified in the petiole and stem. The SI was 14.5 ± 0.53% (p < .05), but did not showed significant variations. A set of characters were found to be distinctive for the studied species, however, constituting parameters that could be used to separate B. sericea from other species of the genus.     

Characteristic time,developers’ behavior and leapfrogging dynamics of high-rise buildings

This paper suggests a plausible explanation for the spatial evolution of high-rise buildings. Contrary to intuitive expectations the histograms and spatial distribution in cities indicate peculiar and non-continuous patterns. These patterns evolve as a result of developers’ behavior in real-estate markets. One of the critical variables in decision-making of developers is time. Despite obvious differences in land prices within a particular real-estate market, differences in costs and prices are relatively small in comparison to differences in their time incidence. The paper presents a simple search model of land developer that suggests interesting explanation of the spatial sprawl of cities. The central parameter in our model is “characteristic time”, the period of time from the acquisition of initial property rights in the land and until the first return on the investment is realized. The model leads to leapfrogging patterns, particularly during downturn periods and explains the appearance of high-rise buildings in the urban periphery.     

Adaptive Remus: adaptive checkpointing for Xen-based virtual machine replication

With the ever increasing dependence on computers and networks, many systems are required to be continuously available in order to fulfil their mission. Virtualization technology enables high availability to be offered in a convenient, cost-effective manner: with the encapsulation provided by virtual machines (VMs), entire systems can be replicated transparently in software, obviating the need for expensive fault-tolerant hardware. Remus is a VM replication mechanism for the Xen hypervisor that provides high availability despite crash failures. Replication is performed by checkpointing the VM at fixed intervals. However, there is an antagonism between processing and communication regarding the optimal checkpoint interval: while longer intervals benefit processor-intensive applications, shorter intervals favour network-intensive applications. Thus, any chosen interval may not always be suitable for the hosted applications, limiting Remus usage in many scenarios. This work introduces Adaptive Remus, a proposal for adaptive checkpointing in Remus that dynamically adjusts the replication frequency according to the characteristics of running applications. Experimental results indicate that our proposal improves performance for applications that require both processing and communication, without harming applications that use only one type of resource.     

Hierarchical reinforcement of polyurethane-based composites with inorganic micro- and nanoplatelets

Hierarchically reinforced structures are widespread in nature but less common among man-made materials. In this paper, we show that polyurethane-based thermoplastic polymers can be hierarchically reinforced with laponite nanoplatelets and alumina microplatelets to reach strength and elastic modulus that are, respectively, 7- and 29-fold higher than that of the pure polymer matrix (91.7 MPa and 6.97 GPa, respectively). We find that the selective reinforcement of the polyurethane hard domains with laponite nanoplatelets is key to keep the polymer matrix sufficiently ductile for the incorporation of high concentrations of alumina microplatelets. Effective reinforcement of the polymer with microplatelets of different surface chemistries was only possible after annealing the composite at 130 °C to promote strong bonding at the oxide/polymer interface. Large-area composite films and bulk parts exhibiting good alignment of alumina microplatelets were obtained through conventional tape-casting. The concept of hierarchical reinforcement demonstrated here can be explored to obtain composite materials covering a wide range of mechanical properties using only a few reinforcing building blocks within the same polymer matrix.