3′5-Dimaleamylbenzoic Acid Attenuates Bleomycin-Induced Pulmonary Fibrosis in Mice

Idiopathic pulmonary fibrosis (IPF) is a chronic lung disease characterized by parenchymal scarring, leading progressively to alveolar architecture distortion, respiratory failure, and eventually death. Currently, there is no effective treatment for IPF. Previously, 3′5-dimaleamylbenzoic acid (3′5-DMBA), a maleimide, demonstrated pro-apoptotic, anti-inflammatory, and anti-cancer properties; however, its potential therapeutic effects on IPF have not been addressed. Bleomycin (BLM) 100 U/kg was administered to CD1 mice through an osmotic minipump. After fourteen days of BLM administration, 3′5-DMBA (6 mg/kg or 10 mg/kg) and its vehicle carboxymethylcellulose (CMC) were administered intragastrically every two days until day 26. On day 28, all mice were euthanized. The 3′5-DMBA effect was assessed by histological and immunohistochemical staining, as well as by RT-qPCR. The redox status on lung tissue was evaluated by determining the glutathione content and the GSH/GSSG ratio. 3′5-DMBA treatment re-established typical lung histological features and decreased the expression of BLM-induced fibrotic markers: collagen, α-SMA, and TGF-β1. Furthermore, 3′5-DMBA significantly reduced the expression of genes involved in fibrogenesis. In addition, it decreased reduced glutathione and increased oxidized glutathione content without promoting oxidative damage to lipids, as evidenced by the decrease in the lipid peroxidation marker 4-HNE. Therefore, 3′5-DMBA may be a promising candidate for IPF treatment.     

Data‐driven bounded‐error fault detection

In this paper, a new data‐driven fault‐detection method is proposed. This method is based on a new nonparametric system identification approach, which constitutes the principal contribution to this work. The fault‐detection method is a parametric model‐free approach that can be applied to nonlinear systems that work at various operating points. Not only can the fault‐detection process be applied to the steady state of each operating point, but it can also be applied to the transient state resulting from a change in the operating point. In order to detect faults, the proposed method uses an interval predictor based on bounded‐error techniques. The utilization of techniques based on bounded error enables system uncertainties to be included in an explicit way. This in turn leads to the possibility of obtaining interval predictions of the behaviour of the system, which include information on the reliability of the prediction itself. In order to show the effectiveness of the fault‐detection method, two examples are presented: in the form of a simulated process (counter‐flow shell‐and‐tube heat‐exchanger system) and an example of a real application (two‐tanks system). A comparison with two fault‐detection methods has also been included. Copyright © 2013 John Wiley & Sons, Ltd.     

A novel magneto‐impedance sensor model based on the zeros of Bessel functions

Nowadays, the design of magneto‐impedance (MI) sensors requires the development of lumped circuit models that can be simulated through equivalent impedance circuits relied on Bessel functions. A new impedance model based on Senani's equivalent using the zeros of Bessel functions is developed in this paper. The model allows to describe the impedance as a transfer function that can be easily synthesized by means of current conveyor circuits and passive elements. The mathematical representation was verified under simulation of transfer functions involving different number of poles and zeros. Moreover, the model has been verified using SPICE simulations and measurement results from a fabricated prototype demonstrating its scope and validity. Finally, a study of finite tracking errors of CCIIs used in the implementation of magneto‐impedance sensor has been realized. Copyright © 2014 John Wiley & Sons, Ltd.     

Influence of nitriding on corrosion resistance of martensitic X17CrNi16‐2 stainless steel

Nitriding increases surface hardness and improves wear resistance of stainless steels. However, nitriding can sometimes reduce their corrosion resistance. In this paper, the influence of nitriding on the corrosion resistance of martensitic stainless steel was investigated. Plasma nitriding at 440 °C and 525 °C and salt bath nitrocarburizing were carried out on X17CrNi16‐2 stainless steel. Microhardness profiles of the obtained nitrided layers were examined. Phase composition analysis and quantitative depth profile analysis of the nitrided layers were preformed by X‐ray diffraction (XRD) and glow‐discharge optical emission spectrometry (GD‐OES), respectively. Corrosion behaviour was evaluated by immersion test in 1% HCl, salt spray test in 5% NaCl and electrochemical corrosion tests in 3.5% NaCl aqueous solution. Results show that salt bath nitrocarburizing, as well as plasma nitriding at low temperature, increased microhardness without significantly reducing corrosion resistance. Plasma nitriding at a higher temperature increased the corrosion tendency of the X17CrNi16‐2 steel.     

A new biobased plasticizer for poly(vinyl chloride) based on epoxidized cottonseed oil

The use of epoxidized cottonseed oil as plasticizer for poly(vinyl chloride) was studied. The plasticizer content was set to 70 phr and the optimum isothermal curing conditions were studied in the temperature range comprised between 160 and 220 °C with varying curing times in the 7.5–17.5 min range. The influence of the curing conditions on overall performance of cured plastisols was followed by the evolution of mechanical properties (tensile tests with measurements of tensile strength, elongation at break, and modulus), change in color, surface changes of fractured samples by scanning electron microscopy (SEM), thermal transitions by differential scanning calorimetry, and migration in n‐hexane. The optimum mechanical features of cured plastisols are obtained for curing temperatures in the 190–220 °C range. For these curing conditions, fractography analysis by SEM gives evidences of full curing process as no PVC particles and free plasticizer can be found. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43642.     

Thermo‐responsive polyurethane hydrogels based on poly(ethylene glycol) and poly(caprolactone): Physico‐chemical and mechanical properties

In this work, we present the synthesis and characterization of chemically crosslinked polyurethanes (PU) composed of poly(ethylene glycol) (PEG) and poly(caprolactone) diol (PCL‐diol), as hydrophilic and hydrophobic segments respectively, poly(caprolactone) triol (PCL‐triol), to induce hydrolysable crosslinks, and hexamethylene diisocyanate (HDI). The syntheses were performed at 45 °C, resulting in polyurethanes with different PEG/PCL‐diol/PCL‐triol mass fractions. All the PUs are able to crystallize and their thermal properties depend on the global composition. The water uptake capacities of the PU increase as the PEG amount increases. The water into hydrogels is present in different environments, as bounded, bulk and free water. The PU hydrogels are thermo‐responsive, presenting a negative dependence of the water uptake with the temperature for PEG rich networks, which gradually changes to a positive behavior as the amount of poly(caprolactone) (PCL) segments increases. However, the water uptake capacity changes continuously without an abrupt transition. Scanning electron microscopy (SEM) analyses of the hydrogel morphology after lyophilization revealed a porous structure. Mechanical compression tests revealed that the hydrogels present good resilience and low recovery hysteresis when they are subject to cycles of compression–decompression. In addition, the mechanical properties of the hydrogels varies with the composition and crosslinking density, and therefore with the water uptake capacity. The PU properties can be tuned to fit for different applications, such as biomedical applications. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43573.     

Characterization of Crude and Partially Purified Lipase from Geotrichum candidum Obtained with Different Nitrogen Sources

Lipases from Geotrichum candidum were produced in two different medium: A = 12 % (w/v) clarified corn steep liquor (CCSL) + 0.6 % (w/v) soybean oil (SO) and B = 3.5 % (w/v) yeast hydrolysate (YH) + 0.7 % (w/v) SO. Lipases were partially purified from both media by hydrophobic interaction chromatography using 3.0 mol L^?1 of NaCl as mobile phase, and they were characterized in the crude and partially purified forms. The recovery of lipase activity from CCSL and YH via HIC were 96 and 94.3 %, and the purification factors were 44.3 and 86.7‐fold, respectively. All evaluated lipases had similar optimum pH (7.0–7.7), but, for the CCSL crude lipase, optimum temperature (47 °C) was 10 °C higher than others lipases evaluated. CCSL crude lipase possessed a higher thermo stability than YH crude lipase, e.g., at 37 °C (pH 7.0) the half‐life of CCSL crude lipase was 19.25 h and at pH 8.0 (30 °C) the half‐life was 48 h, which are five and ten times higher than with YH crude lipase, respectively. On the other hand, the YH crude lipase possessed a higher catalytic constant (k_cat = 2.3 min^?1) but with almost the same catalytic efficiency (K_m/k_cat = 32.12 mg mL min^?1) in relation to CCSL crude lipase. The lipases differ in biocatalytic properties between substrates, suggesting that the two lipases can be employed for different applications.     

Effect of Tempering on the Oxidation Behaviour of a Roll-Grade High-Speed Steel During Thermal Cycling

Oxidation of Metals - The oxidation characteristics of a roll-grade high-speed steel with different tempering heat treatments were studied under thermal cycling conditions at 650 °C...