pH control of the condensation reaction and its effect on the properties of formaldehyde/urea resins

The conditions of the preparation of formaldehyde/urea (F/U) resins have been supervised with the aim to reduce formaldehyde emission by influencing the ratio of methylene/dimethylene-ether-bridge linkages in the product. The most crucial point of this task is to keep the pH values of the reacting mixtures on the required level. The effect of formic acid, unevitably present in industrial formaldehyde solutions, was neutralized by applying a new buffer system, containing boric acid and ethylene glycol.     

Using the Percolation Theory to Explain the Release Behavior from Inert Matrix Systems

A novel analysis of drug release process from binary matrix systems has been realized and a study of the initial stage of the process has been carried out. A fast and easy technique has allowed the acquisition of one experimental datum per second. Release data have been analyzed by means of a detailed statistical study. The dissolution profiles were studied applying different kinetic models (zero order, logarithmic, and Higuchi equation). In all the cases studied, a starting process of zero or first order, indicative of a surface-dependent mechanism, has been found. Then, a parameter, named as critical time of kinetic change (t_c), has enabled the authors to establish the instant at which a diffusion release mechanism, according to Higuchi equation, is consolidated. From this time until the end of the process, release mechanism of matrices was shown to be diffusion controlled. The influence of the drug loading and the particle size over the release properties of tablets has also been investigated and it has been evaluated on the basis of percolation theory. The results show a major significance of particle size over the initial drug release and a decrease of its influence along the time. On the other hand, the drug loading variable shows an important influence over the release properties along the whole process.     

Analysis of low load transients for the Vandellòs-II NPP: Application to operation and control support

The Technical University of Catalonia (UPC) has been jointly working with the Asociación Nuclear Ascó-Vandellòs (ANAV) for a number of years in order to establish, qualify and use best estimate (BE) models for the reactors under the control of ANAV. ANAV is the consortium that is responsible for operation of the Ascó and Vandellòs-II reactors. The reactors are Westinghouse-design three-loop PWRs with an approximate electrical power of 1000 MW. The existing integral plant models for each plant are currently used for many different purposes among which are support of plant operation and control. Quite a number of studies have been done in order to improve both safety and plant competitiveness. Most of these dynamic analyses were carried out in relation to transients starting at nominal full power or at least, very close to full power. This paper develops a specific use of the Vandellòs-II plant model for operation and control support at low power involving new ranges of system actuation parameters. It also examines scenarios that are somewhat different from those typically analysed. The study starts showing the results of an assessment case, which is a start-up test and provides some additional qualification, and subsequently attempts to establish calculations to support both an improvement in feed water controls and to set up operating recommendations for low-load manual operation of feed water turbo-pump. Both results hopefully, will produce an outcome, which leads to an improvement in safety and reduces reactor trip probability.     

Utility of Albicans ID plate for rapid identification of Candida albicans in clinical samples. Rapid identification of Candida albicans

A clinical study was carried out in an attempt to assess the efficacy of a newly designed electric toothbrush compared to a conventional manual toothbrush using the American Dental Association's protocol for evaluating toothbrushes. An Oral-B 35 manual toothbrush, which served as the control, was compared to the Plaq & White125 electric toothbrush. Examinations were performed by two calibrated examiners at baseline, day 15 and day 30. Examinations included the gingival index, plaque index and bleeding index. Mean indices were calculated and compared between the two brushes using the repeated measures multiple analysis of variance. No statistically significant differences between the mean indices on the three examination days were observed following the use of the manual or the electric toothbrushes. The results of this study demonstrate that the electric toothbrush was numerically more effective than the manual toothbrush in reducing supragingival plaque levels, either before or after brushing, at each examination date compared to baseline plaque values. However, this difference was not statistically significant. This and other findings concluded that the Plaq & White toothbrush is comparable to the control ADA-accepted toothbrush.     

On formalism and stability of switched systems

In this paper,we formulate a uniform mathematical framework for studying switched systems with piecewise linear partitioned state space and state dependent switching.Based on known results from the the...     

Initial stages of tin electrodeposition from sulfate baths in the presence of gluconate

Tin electrodeposition in its initial stages in acid sulfate/gluconate baths was studied with varying tin and gluconate concentrations using potential-controlled electrochemical techniques. The deposit morphology was observed by scanning electron microscopy (SEM). A comparison with tin electrodeposition from acid sulfate baths in the absence of gluconate was also carried out. Use of a highly acidic bath leads to nonuniform deposits, even in the presence of gluconate; at pH 4 deposits are uniform, brilliant and suitable for finishing applications. Tin crystallites have a well defined morphology which depends on bath agitation conditions. In the absence of agitation, the crystallites have the same tetragonal shape as in a sulfate bath without gluconate.     

The role of the surface free energy in the selection of a suitable excipient in the course of a wet-granulation method

Pellets containing metronidazole were produced in a centrifugal granulator, with hydroxypropylcellulose (Klucel LF®) as binding agent, and corn starch, microcrystalline cellulose (Vivapur 101®) and lactose as excipients. The wettability of the pharmaceutical powders was assessed by means of contact angle measurements, and the dispersive and polar surface energies were determined. The spreading coefficients, the work of adhesion and the work of cohesion were calculated and correlated with the pellet properties (friability, bulk and tapped density, and porosity). The aim was to investigate the role of the surface free energy of one- and two-component powder compositions in pellet production. The interactions between the particles were found to be connected with the measured pellet parameters. It was concluded that, in the course of the growth of the pellets, the particle sizes of the pharmaceutical powders and the interactions between them are important. If the work of cohesion of the binder is lower than the work of cohesion of the substrate and the work of adhesion, then the optimal amount of the binding agent is that which coats the particles uniformly in minimal quantity and in continuous layer.