Fluorescence Polarization Immunoassay for Rapid, Accurate and Sensitive Determination of Ochratoxin A in Wheat

A sensitive and accurate fluorescence polarization (FP) immunoassay has been developed for the determination of ochratoxin A (OTA) in naturally contaminated wheat samples. A fluorescein-labeled OTA tracer was synthesized, and its binding response with three monoclonal antibodies was tested. The most sensitive competitive FP immunoassay showed an IC₅₀ value of 0.48 ng/mL with a negligible cross-reactivity for ochratoxin B (1.7 %) and no cross-reactivity with other mycotoxins commonly occurring in wheat. The wheat sample was extracted with acetonitrile/water (60:40, v/v) and purified by a rapid solid-phase extraction procedure using an aminopropyl column prior to the FP immunoassay. The overall time of analysis was less than 20 min. The average recovery from spiked wheat samples (3 to 10 μg/kg) was 87 %, with relative standard deviations generally lower than 6 %. Limits of detection and quantification were 0.8 and 2.0 μg/kg, respectively. The trueness of the method was assessed by using two reference materials for OTA showing good accuracy and precision. A good correlation (r?=?0.995) was observed between OTA contamination of 19 naturally contaminated wheat samples analyzed by both FP immunoassay and high-performance liquid chromatography/immunoaffinity clean-up used as reference method. These results show that the developed FP method is suitable for high-throughput screening, as well as for reliable quantitative determination of OTA in wheat at level far below the EU regulatory limits.     

Molecular Alterations in Gastric Preneoplastic Lesions and Early Gastric Cancer

Prognosis of gastric cancer is dramatically improved by early diagnosis. Correa’s cascade correlates the expression of some molecular markers with the progression of preneoplastic lesions toward carcinoma. This article reviews the diagnostic and prognostic values of molecular markers in complete (MUC2) and incomplete (MUC2, MUC5AC, and MUC6) intestinal metaplasia, gastric dysplasia/intra-epithelial neoplasia, and early gastric cancer. In particular, considering preinvasive neoplasia and early gastric cancer, some studies have demonstrated a correlation between molecular alterations and prognosis, for example, mucins phenotype in gastric dysplasia, and GATA6, TP53 mutation/LOH and MUC6 in early gastric cancer. Moreover, this review considers novelties from the literature regarding the (immuno)histochemical characterization of diffuse-type/signet ring cell gastric cancer, with particular attention to clinical outcomes of patients. The aim of this review is the evaluation of the state of the art regarding suitable biomarkers used in the pre-surgical phase, which can distinguish patients with different prognoses and help decide the best therapeutic strategy.     

Pathophysiology of Diverticular Disease: From Diverticula Formation to Symptom Generation

Diverticular disease is a common clinical problem, particularly in industrialized countries. In most cases, colonic diverticula remain asymptomatic throughout life and sometimes are found incidentally during colonic imaging in colorectal cancer screening programs in otherwise healthy subjects. Nonetheless, roughly 25% of patients bearing colonic diverticula develop clinical manifestations. Abdominal symptoms associated with diverticula in the absence of inflammation or complications are termed symptomatic uncomplicated diverticular disease (SUDD). The pathophysiology of diverticular disease as well as the mechanisms involved in the shift from an asymptomatic condition to a symptomatic one is still poorly understood. It is accepted that both genetic factors and environment, as well as intestinal microenvironment alterations, have a role in diverticula development and in the different phenotypic expressions of diverticular disease. In the present review, we will summarize the up-to-date knowledge on the pathophysiology of diverticula and their different clinical setting, including diverticulosis and SUDD.     

Characterizing bubble behavior in a pseudo-2D fluidized bed of wet particles

By applying digital image analysis on the bubble characteristics in a two dimensional wet-particle fluidized-bed, we report two-stage evolution of bubble characteristics with increasing liquid content. In the first stage, bubble number and uniformity of bubble fraction increase, while bubble average diameter and aspect ratio decrease. In the second stage, these characteristics shift toward an opposite direction. This two-stage evolution of bubble characteristics are analogous to that of reducing particle size in dry-particle fluidization, and the fluidizing properties of particles shifts from Geldart Group B to Group A and then to Group C. Furthermore, liquid addition causes a continuous decrease of bubble fraction and bubble flow rate. This is different from dry-particle fluidization, in which reducing particle size causes an increase trend. An explanation for this difference is that liquid addition increases the equivalent size of agglomerates in wet-particle fluidization, which is opposite to the effect of reducing particle size.     

Advanced Pyrrolidine-Carbamate Self-Immolative Spacer with Tertiary Amine Handle Induces Superfast Cyclative Drug Release

Amine-carbamate self-immolative (SI) spacers represent practical and versatile tools in targeted prodrugs, but their slow degradation mechanism limits drug activation at the site of disease. We engineered a pyrrolidine-carbamate SI spacer with a tertiary amine handle which strongly accelerates the spacer cyclization to give a bicyclic urea and the free hydroxy groups of either cytotoxic (Camptothecin) or immunostimulatory (Resiquimod) drugs. In silico conformational analysis and pK_a calculations suggest a plausible mechanism for the superior efficacy of the advanced SI spacer compared to state-of-art analogues.     

Cross‐Coupling of Heteroarenes by C?H Functionalization: Recent Progress towards Direct Arylation and Heteroarylation Reactions Involving Heteroarenes Containing One Heteroatom

In recent years, transition metal‐catalyzed direct (hetero)arylation reactions of heteroarenes with (hetero)aryl halides and pseudohalides have received significant attention as eco‐friendly and economic alternatives to classical methods for the construction of heteroaryl‐(hetero)aryl C C bonds by transition metal‐catalyzed cross‐couplings involving the use of stoichiometric amounts of organometallic reagents. This critical review with 430 references covers the results obtained in the period January 2009 to February 2013 in the area of the transition metal‐catalyzed direct inter‐ and intramolecular (hetero)arylation reactions of heteroarenes containing one heteroatom. Particular attention has been given to illustrate chemo‐ and site selectivity aspects of these reactions as well applications of these C C bond forming reactions in the synthesis of pharmaceutically relevant compounds, natural products and their analogues and precursors. The most recent advancements into the mechanism(s) of these reactions have also been briefly reported.

     

Bio-electrochemical production of hydrogen and electricity from organic waste: preliminary assessment

Clean Technologies and Environmental Policy - This study investigated the performance of a novel integrated bio-electrochemical system for synergistic hydrogen production from a process combining a...     

A Survey of Indicators for Mesh Quality Assessment

We analyze the joint efforts made by the geometry processing and the numerical analysis communities in the last decades to define and measure the concept of “mesh quality”. Researchers have been striving to determine how, and how much, the accuracy of a numerical simulation or a scientific computation (e.g., rendering, printing, modeling operations) depends on the particular mesh adopted to model the problem, and which geometrical features of the mesh most influence the result. The goal was to produce a mesh with good geometrical properties and the lowest possible number of elements, able to produce results in a target range of accuracy. We overview the most common quality indicators, measures, or metrics that are currently used to evaluate the goodness of a discretization and drive mesh generation or mesh coarsening/refinement processes. We analyze a number of local and global indicators, defined over two- and three-dimensional meshes with any type of elements, distinguishing between simplicial, quadrangular/hexahedral, and generic polytopal elements. We also discuss mesh optimization algorithms based on the above indicators and report common libraries for mesh analysis and quality-driven mesh optimization.