Corrosion protection of commercial steel using stainless steel coatings deposited by Cathodic Arc Plasma Deposition technique

The commercial steel AISI 1010 was coated with AISI 316L steel using Cathodic Arc Plasma Deposition (CAPD) technique. The coatings were deposited in vacuum and in the presence of nitrogen, acetylene and mixture of the two as reactive gases. The coatings were deposited as a function of time while other parameters remained constant. The coatings 0.75 to 1.3 μm thick were adherent and amorphous. The aqueous corrosion properties of the coated samples in 3.5 wt % NaCl solution were studied by Tafel, cyclic and potentiodynamic polarization measurements. The derived corrosion parameters were then compared among the various uncoated and coated samples. The study revealed that the coated samples were more corrosion resistant than the uncoated one. Similarly, the samples coated in the nitrogen + acetylene mixture atmosphere were more corrosion resistant than the samples coated in only nitrogen and acetylene atmospheres. The corrosion parameters were also compared as a function of coating time to ascertain best coating thickness.     

Biofilm reduction,cell proliferation,anthelmintic and cytotoxicity effect of green synthesised silver nanoparticle using Artemisia vulgaris extract

Infectious diseases are caused by etiological agents. Nanotechnology has been used to minimise the effect of clinical pathogens which have resistance to antibiotics. In current research synthesis, characterisation and biological activities of green synthesised nanoparticles using Artemisia vulgaris extract have been done. The characterisation of AgNPs was carried out using Fourier transform infrared spectroscopy, UV‐Vis spectrophotometry, and scanning electron microscopy. Anti‐biofilm, cell viability, antibacterial, brine shrimp lethality, and deoxyribonucleic acid protection effects have been screened. UV‐Vis spectra showed the absorption peak of synthesised nanoparticles at 400 nm. FT‐IR indicated the involvement of the functional group in the preparation of AgNPs. SEM showed the spherical shape of AgNPs with 30 nm diameter. Biological screening results revealed the antibacterial effect against clinical bacterial pathogens. Biofilm reduction and cell viability assay also supported the antibacterial effect. Cytotoxicity effect was recorded as 100% at 200 μg/ml through brine shrimp lethality assay. Protein kinase inhibition zones recorded for AgNPs (16 mm bald) compared with A. vulgaris extract (11 mm bald). It has been concluded that green synthesised AgNPs are more effective against infectious pathogens and could be used as a potential source for therapeutic drugs.Inspec keywords: cellular biophysics, toxicology, silver, nanoparticles, nanomedicine, diseases, microorganisms, ultraviolet spectra, visible spectra, Fourier transform infrared spectra, enzymes, molecular biophysicsOther keywords: biofilm reduction, cell proliferation, anthelmintic effect, cytotoxicity effect, green synthesised silver nanoparticle, Artemisia vulgaris extract, infectious diseases, aetiological agents, Fourier transform infrared spectroscopy, UV‐Vis spectrophotometry, scanning electron microscopy, SEM, antibiofilm, cell viability, brine shrimp lethality, deoxyribonucleic acid protection effects, AgNP, cytotoxicity, protein kinase inhibition zones, therapeutic drugs     

Effect of seasonal variations and lactation times on aflatoxin M1 contamination in milk of different species from Punjab, Pakistan

During October 2009 to September 2010, aflatoxin M₁ (AFM₁) levels were analyzed by HPLC-FLD in 356 milk samples of different lactating species (buffalo, cow, goat, sheep and camel) from Punjab (Pakistan). Recoveries of AFM₁ ranged from 92 to 97% and the limit of detection (LOD) was 0.004 μg/L. For all lactating species the mean concentration of AFM₁ was significantly higher in winter season than in summer (p < 0.05). The results showed that 55, 56, 32, 58 and 27% of winter milk samples of buffalo, cow, goat, sheep and camel exceeded the EU maximum limit (0.05 μg/kg), compared with 38, 33, 21, 36 and 14% of summer milk samples, respectively. For all lactating species the mean concentration of AFM₁ was significantly higher in morning milks than in evening milks (p < 0.05). The percentage of morning milk samples exceeding the EU maximum limit was 72, 67, 69, 71 and 44% for buffalo, cow, goat, sheep and camel, while for evening milks percent non compliant rates were 39, 30, 18, 33 and 25%, respectively. The level of AFM₁ tended to be higher in animal species fed mainly on concentrate mixtures (buffalo and cow) than in other species grazing on fresh greens.     

Electrical and dielectric properties of lithium manganate nanomaterials doped with rare-earth elements

Substituted LiR_xMn_2 − xO₄ (R = La³⁺, Ce³⁺_, Pr³⁺ and x = 0.00 − 0.20) nanoparticles are prepared by the sol–gel method and the consequent changes in their lattice structure, dielectric and electrical parameters are determined by XRD, ED-XRF, SEM, LCR meter bridge and dc electrical resistivity measurements. Diffraction data show that the samples are single-phase spinel materials with crystallites sizes between 21 and 38 nm. The lattice parameter, cell volume and X-ray density are found to be affected by doping the Li-manganate with the rare-earth elements. The ED-XRF analysis confirms the stoichiometric composition of the synthesized samples and SEM reveals their morphology. Calculated values of the dielectric constant (?) and the dielectric loss (tan δ) decrease with the frequency of the applied field. This is attributed to Maxwell–Wagner polarization. Replacement of manganese by the rare-earth elements results in an improvement in the structural stability of the material, which is considered to be useful for enhancement of the cycleability of the compounds when used in lithium rechargeable batteries, and increases significantly the values of ? and tan δ (except for Ce). Lithium manganate nanomaterials with high ? and low tan δ may be attractive for application in memory storage devices.     

A decade of in-text citation analysis based on natural language processing and machine learning techniques: an overview of empirical studies

Scientometrics - In-text citation analysis is one of the most frequently used methods in research evaluation. We are seeing significant growth in citation analysis through bibliometric metadata,...     

Secure sensors data acquisition and communication protection in eHealthcare: Review on the state of the art

Recent advances in hardware technology have led to the development of low cost, power efficient and more feature rich devices that are amongst the most critical parts of communication networks. These devices or sensors can now sense data with more accuracy, process it by themselves and send it to the neighboring node or the sink node. However, robust and reliable security mechanisms are not yet properly implemented on these sensors due to their limited energy and computation power. Sensors also play a very important role in eHealthcare systems where ubiquitous patient monitoring is performed. As data is generated from the sensor nodes, reliable, secure and attack-resistant data acquisition and transmission is important for an efficient eHealthcare systems. This survey focuses on security issues of sensors data acquisition and transmission protocols, describing their main security features and comparing them in the context of a secure eHealthcare system. A taxonomy of open issues and future challenges is also discussed with respect to specific security metrics described in the paper.     

Cure characterization of Cycom 977‐2A carbon/epoxy composites for quickstep processing

In this effort, Quickstep, a relatively a new technique, have been employed for manufacturing of composite materials. The cure schedule provided by a prepreg manufacturer is usually designed for autoclave or other traditional processing techniques and thermosetting resin systems are formulated for ramp rate curing 2–3 K min^?1. While in case of Quickstep processing, ramp rates of 15 K min^?1 can be achieved, thus changing the chemorheology of resin. The cure process of 977‐2A carbon/epoxy composites was evaluated for Quickstep processing using differential scanning calorimetry (DSC), dynamic mechanical and thermal analysis, and Fourier transformed infrared and results were compared with cure cycle employed for autoclave curing. Optimum hold time for Quickstep processing at upper curing temperature (180°C) was determined using DSC. The hold time of 120 min at 180°C was found to be suitable for Quickstep cure cycle, producing a panel of similar degree of cure to that achieved through autoclave processing schedule. Final degree of cure was dependent on time spent at upper cure temperature and slightly on initial steps of the cure cycle which was used to control the resin flow, fiber wetting, and void removal. Quickstep processed samples exhibited higher T_g and crosslink density and similar molecular network structure to the autoclave cured samples. POLYM. ENG. SCI., 54:887–898, 2014. © 2013 Society of Plastics Engineers     

Chemo-enzymatic synthesis of amino acid-based surfactants

The application of lipases to the synthesis of amino acid-based surfactants was investigated. Low yields (2–9%) were obtained in the acylation of free amino acids, such as l-serine and l-lysine, as well as their ethyl esters and amides with fatty acids, owing in part to low miscibility of the reactants. When the N-carbobenzyloxy (Cbz)-l-amino acids were used in an effort to improve miscibility of the amino acid derivatives with the acyl donor, a dramatic improvement was observed for N-Cbz-l-serine (92% yield) but not for N _α-Cbz- or N _ζ-Cbz-l-lysine (7 and 2% yield, respectively). As an alternative, and efficient synthesis of N _ζ-acyl-l-lysines was developed, based on the regiospecific chemical acylation of copper(II) lysinate. In pursuit of a general route to amino acid-fatty acid surfactants, the utility of a polyol linker was investigated. Thus, the glycerol ester of N _α′ N _ζ-di-Cbz-l-lysine was prepared and evaluated as a substrate for acylation. As expected, this and other glycer-1-yl esters of N-protected amino acids were excellent substrates for lipase-catalyzed acylation. Their reaction with myristic acid in the presence of Novozyme resulted in the regioselective acylation of the primary hydroxyl group of the glycerol moiety to afford the corresponding 1-O-(N-Cbz-l-aminoacyl)-3-O-myris-toylglycerols with conversions of 50–90%. These were readily deprotected to give a range of 1-O-(aminoacyl)-3-O-myristoyl-glycerols with overall yields of 27–71%.     

Refrigerated cooling air cutting of difficult-to-cut materials

One approach to enhance machining performance is to apply cutting fluids during cutting process. However, the use of cutting fluids in machining process has caused some problems such as high cost, pollution, and hazards to operator's health. All the problems related to the use of cutting fluids have urged researchers to search for some alternatives to minimize or even avoid the use of cutting fluids in machining operations. Cooling gas cutting is one of these alternatives. This paper investigates the effect of cooling air cutting on tool wear, surface finish and chip shape in finish turning of Inconel 718 nickel-base super alloy and high-speed milling of AISI D2 cold work tool steel. Comparative experiments were conducted under different cooling/lubrication conditions, i.e. dry cutting, minimal quantity lubrication (MQL), cooling air, and cooling air and minimal quantity lubrication (CAMQL). For this research, composite refrigeration method was adopted to develop a new cooling gas equipment which was used to lower the temperature of compressed gas. The significant experimental results were: (i) application of cooing air and CAMQL resulted in drastic reduction in tool wear and surface roughness, and significant improvement in chip shape in finish turning of Inconel 718, (ii) in the high-speed milling of AISI D2, cooling air cutting presented longer tool life and slightly higher surface roughness than dry cutting and MQL. Therefore, it appears that cooling air cutting can provide not only environment friendliness but also great improvement in machinability of difficult-to-cut materials.