Microchip sonic spray ionization

The first microchip version of sonic spray ionization (SSI) as an atmospheric pressure ionization source for mass spectrometry (MS) is presented. The microchip used for SSI has recently been developed in our laboratory, and it has been used before as an atmospheric pressure chemical ionization (APCI) and atmospheric pressure photoionization (APPI) source. Now the ionization is achieved simply by applying high (sonic) speed nebulizer gas, without heat, corona discharge, or high voltage. The microchip SSI was applied to the analysis of tetra-N-butylammonium, verapamil, testosterone, angiotensin I, and ibuprofen. The limits of detection were in the range of 15 nM to 4 microM. The technique was found to be highly dependent on the position of the chip toward the mass spectrometer inlet, and on the gas and the sample solution flow rates. The microchip SSI provided dynamic linearity following a pattern similar to that used with electrospray, good quantitative repeatability (RSD=16%), and long-term signal stability.     

Microchip for combining gas chromatography or capillary liquid chromatography with atmospheric pressure photoionization-mass spectrometry

We present a microfabricated nebulizer chip for combining atmospheric pressure photoionization-mass spectrometry (APPI-MS) with gas chromatography (GC) or capillary liquid chromatography (capLC). The chip consists of a silicon plate and a glass plate or two glass plates. The chip includes a sample inlet channel, auxiliary gas and dopant inlet, vaporizer channel, nozzle, and platinum heater. The sample eluted from the capLC or GC is mixed with auxiliary gas and dopant (toluene) in the heated vaporizer. The chip forms a confined jet of the sample vapor, which is photoionized as it exits the chip. The analytical performance of GC- and capLC-microchip APPI-MS was evaluated with some polycyclic aromatic hydrocarbons, amphetamines, and steroids. The GC-muAPPI-MS method provides high sensitivity down to 0.8 fmol, repeatability (RSD = 7.5-14%), and linearity (r = 0.9952-0.9987). The capLC-muAPPI-MS method shows high sensitivity down to 1 fmol, good repeatability (RSD = 3.6-8.1%), and linearity (r = 0.9989-0.9992).     

The Potentiality of Plant-Derived Nanovesicles in Human Health—A Comparison with Human Exosomes and Artificial Nanoparticles

Research in science and medicine is witnessing a massive increases in literature concerning extracellular vesicles (EVs). From a morphological point of view, EVs include extracellular vesicles of a micro and nano sizes. However, this simplistic classification does not consider both the source of EVs, including the cells and the species from which Evs are obtained, and the microenvironmental condition during EV production. These two factors are of crucial importance for the potential use of Evs as therapeutic agents. In fact, the choice of the most suitable Evs for drug delivery remains an open debate, inasmuch as the use of Evs of human origin may have at least two major problems: (i) autologous Evs from a patient may deliver dangerous molecules; and (ii) the production of EVs is also limited to cell factory conditions for large-scale industrial use. Recent literature, while limited to only a few papers, when compared to the papers on the use of human EVs, suggests that plant-derived nanovesicles (PDNV) may represent a valuable tool for extensive use in health care.     

A pan EU survey of consumer attitudes to food, nutrition and health: an overview

The objective of the study was to investigate attitudes to food, nutrition and health among nationally-representative samples of adults from each member state of the European Union. Overall, 14 331 subjects completed the face-to-face interviewer-assisted questionnaire. A majority of EU subjects believe they do not need to alter their diets, as they perceive them to be already healthly enough. Price may play a significant role in the choice of food for some groups in the population. Furthermore, a lack of knowledge about nutrition is not a commonly cited barrier to healthy eating. Among EU subjects there is general agreement about the sources of information on healthy eating which they use and trust, health professionals are the most trusted source across all member states. The problem facing healthy eating promoters in the EU may not, therefore, be a lack of knowledge, but rather how nutritional guidelines pertain to themselves. For nutrition education programmes to be effective, it is important that strategies be designed which take account of the cultural diversity, thereby reflecting the geographical variability of the EU population as well as being targeted or focused to specific sub-groups in the population.     

Optical analysis of adsorption sensitivity of titanium, Ti-6Al-4V, and Ti-35Nb-6Ta

Here we report the optical analysis of protein adsorption sensitivity of titanium (Ti), Ti(6)Al(4)V, and Ti(35)Nb(6)Ta. The optical sensor used was a diffractive optical element based sensor, which analyzes magnitude and coherence of probe beam reflected from the measured surfaces. Also, the roughness and other necessary parameters were taken into account on the final verdict. The material Ti(35)Nb(6)Ta showed positive initial reaction to the human plasma fibrinogen, which was the protein used. The Ti(35)Nb(6)Ta was observed to be more active than the grade 2 titanium.     

Structure and Morphology Development in Films of mLLDPE/LDPE Blends During Blowing

Summary: In this work the analysis of the structure orientation, morphology, relaxation time and optical properties of blown films of mLLDPE, LDPE and their blends were performed by using WAXD, SALS, AFM, DSC and rheological and haze tests. For mLLDPE film, the crystals do not present “a”‐axis orientation along the machine direction; a distinct spherulite like superstructure is seen. The film surface is very rough. The values of bulk and surface haze are higher than LDPE and blends, whereas the relaxation time is lower. For LDPE film the (110) planes are parallel and at same time twisted with respect to the layer of the film with the “a”‐axis well oriented along the machine direction. No spherulite superstructure is observed and the surface of the film is more regular. High values of relaxation time are observed. The surface haze is the predominant contribution to the total haze. For the blend films no clear and distinct spherulite structures are observed. The orientation degree increases with composition never approaching that of LDPE. The surface is very more regular and smooth than that of the pure polymers. The haze values are below the values of pure materials. It was underlined that bulk and surface morphology and orientation degree of the crystalline planes along the machine direction dictate the optical properties of the films. Moreover both orientation and morphology are defined by the PE molecular and melt rheology characteristics, processing conditions and blend composition.

Total, bulk and surface haze of mLLDPE/LDPE blend films as a function of composition.     

The Potent Phytoestrogen 8-Prenylnaringenin: A Friend or a Foe?

8-prenylnaringenin (8-PN) is a prenylated flavonoid, occurring, in particular, in hop, but also in other plants. It has proven to be one of the most potent phytoestrogens in vitro known to date, and in the past 20 years, research has unveiled new effects triggered by it in biological systems. These findings have aroused the hopes, expectations, and enthusiasm of a “wonder-drug” for a host of human diseases. However, the majority of 8-PN effects require such high concentrations that they cannot be reached by normal dietary exposure, only pharmacologically; thus, adverse impacts may also emerge. Here, we provide a comprehensive and up-to-date review on this fascinating compound, with special reference to the range of beneficial and untoward health consequences that may ensue from exposure to it.     

Transcrystallinity phenomena in fiber-reinforced polypropylene. II: Morphology,thermal and mechanical properties relationships

The effect of short-length carbon and Kevlar fibers on the crystallization of isotactic polypropylene (iPP) in composites prepared by compression molding has been investigated. The tendency of carbon and Kevlar fibers to nucleate the iPP during isothermal and nonisothermal crystallization has been evaluated by differential scanning calorimetry. The influence of different thermal histories used to prepare the unreinforced and reinforced samples on the crystallization parameters of iPP was examined. In addition, the tensile behavior was related to the resulting morphologies of the samples. It was observed that the crystallinity content, obtained by using different thermal treatments (slowly cooling or quenching), gives rise to different morphologies by influencing the mechanical behavior of materials as well. Moreover, the composites obtained by slow cooling seem to present a better fibber/matrix adhesion then that found in quenched samples. Possible underlying microstructures, which can explain the properties and the morphological characteristics, are also discussed.     

Dual Antenna Receivers for High Data Rate Terminals

In this paper, dual antenna receiver architectures are studied including RAKE, chip-level linear equalizer, and their combination. The arithmetic complexity of single and dual antenna receiver methods is analyzed. Cost of such receivers when implemented with customized hardware or software on application-specific instruction set processors (ASIP) is estimated. The study shows that feasible dual antenna detection can be obtained with less than 70% additional costs. More flexible implementation supporting several standards can be obtained with software but it requires higher power consumption due to additional memory.