Dynamic mechanical analysis and broadband electromagnetic interference shielding characteristics of poly (vinyl alcohol)-poly (4-styrenesulfonic acid)-titanium dioxide nanoparticles based tertiary nanocomposites

ABSTRACT

Novel tertiary nanocomposite films comprising of poly (vinyl alcohol) (PVA), poly (4-styrenesulfonic acid) (PSSA) and titanium dioxide (TiO₂) nanoparticles (NP_S) were prepared using simple solvent casting method. The structural, thermal, morphological, thermo-mechanical and electromagnetic interference (EMI) shielding properties of PVA/PSSA/TiO₂ nanocomposite films were investigated. The EMI shielding effectiveness (SE) of PVA/PSSA/TiO₂ nanocomposite films in the X and Ku band was found to be 12 dB and 13 dB respectively at 25 wt% TiO₂ NPs loading. These results demonstrate the possible applications of PVA/PSSA/TiO₂ nanocomposite films as low cost, lightweight and flexible material for EMI shielding.     

Elucidating the Effects of Cu‐Nanoparticles in a Porous Medium vis‐à‐vis Heat Transfer Phenomena

In this paper, a numerical simulation technique is developed to investigate the qualitative and quantitative behaviour of Cu‐nanoparticles in a porous medium vis‐a‐vis the heat transfer enhancements—buoyancy driven flow in a two‐dimensional square cavity, with moving walls is presented. The model utilizes the finite volume approach to solve the Brinkman–Darcy equations for Cu‐nanoparticles in a porous media. Discretization is carried out for convective and diffusive fluxes using Quadratic Upwind Interpolation for Convective Kinematics (QUICK) and central difference schemes, respectively. Tri‐Diagonal Matrix Algorithm is invoked to solve the set of algebraic equations. The Darcy number (Da), Prandtl number (Pr), and volume fraction (χ) are varied from 10^?3 to 10^?1, 3 to 7, and 0% to 20%, respectively. Insight into the cause of variations in isotherms, streamlines, Nusselt number (Nu), and mid‐plane velocities is explicated. The present numerical results are compared with the existing literature and found to be in good agreement. Even though nanoparticles slightly hinder the activity of the fluid, they can augment the average Nu by 90% for Pr = 7, Da = 0.1, and χ = 20% as compared to the absence of nanoparticles. Their efficacy is more prominent for flows with higher Da and Pr. Quantitative values for Nu were obtained for various combinations of Pr, Da, and χ.     

A green and facile one-pot synthesis of Ag–ZnO/RGO nanocomposite with effective photocatalytic activity for removal of organic pollutants

In this study, Ag–ZnO/reduced graphene oxide (Ag–ZnO/RGO) composite was synthesized by a green and facile one-step hydrothermal process. Aqueous suspension containing Ag and ZnO precursors with graphene oxide (GO) sheets was heated at 140 °C for 2 h. The morphology and structure of as-synthesized particles were characterized by field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman spectroscopy, and Photoluminescence (PL) spectroscopy which revealed the formation of composite of metal, metal oxide and RGO. It was observed that the presence of Ag precursor and GO sheets in the hydrothermal solution could sufficiently decrease the size of ZnO flowers. The hybrid nanostructure, with unique morphology, obtained from this convenient method (low temperature, less time, and less number of reagents) was found to have good photocatalytic and antibacterial activity. The perfect recovery of catalyst after reaction and its unchanged efficiency for cyclic use showed that it will be an economically and environmentally friendly photocatalyst.     

rGO Sheets/ZnFe2O4 Nanocomposities as an Efficient Electro Catalyst Material for I3−/I− Reaction for High Performance DSSCs

In this paper, Reduced Graphene Oxide (rGO)/ZnFe₂O₄ (rZnF) nanocomposite is synthesized by a simple hydrothermal method and employed as a counter electrode (CE) material for tri-iodide redox reactions in Dye sensitized solar cells (DSSC) to replace the traditional high cost platinum (Pt) CE. X-ray diffraction analysis and High resolution Transmission electron microscopy, clearly indicated the formation of rZnF nanocomposite and also amorphous rGO sheets were smoothly distributed on the surface of ZnFe₂O₄ (ZnF) nanostructure. The rZnF-50 CE shows excellent electro catalytic activity toward I₃^? reduction, which has simultaneously been confirmed by cyclic voltammetry, electrochemical impedance spectroscopy and Tafel polarization measurements. A DSSC developed by rZnF-50 CE (η?=?8.71%) obtained quite higher than the Pt (η?=?8.53%) based CE under the same condition. The superior performances of rZnF-50 CE due to addition of graphene in to Spinel (ZnF) nanostructure results in creation of highly active electrochemical sites, fast electron transport linkage between CE and electrolyte. Thus it’s a promising low cost CE material for DSSCs.

     

A reaction mechanism for gasoline surrogate fuels for large polycyclic aromatic hydrocarbons

This work aims to develop a reaction mechanism for gasoline surrogate fuels (n-heptane, iso-octane and toluene) with an emphasis on the formation of large polycyclic aromatic hydrocarbons (PAHs). Starting from an existing base mechanism for gasoline surrogate fuels with the largest chemical species being pyrene (C₁₆H₁₀), this new mechanism is generated by adding PAH sub-mechanisms to account for the formation and growth of PAHs up to coronene (C₂₄H₁₂). The density functional theory (DFT) and the transition state theory (TST) have been adopted to evaluate the rate constants for several PAH reactions. The mechanism is validated in the premixed laminar flames of n-heptane, iso-octane, benzene and ethylene. The characteristics of PAH formation in the counterflow diffusion flames of iso-octane/toluene and n-heptane/toluene mixtures have also been tested for both the soot formation and soot formation/oxidation flame conditions. The predictions of the concentrations of large PAHs in the premixed flames having available experimental data are significantly improved with the new mechanism as compared to the base mechanism. The major pathways for the formation of large PAHs are identified. The test of the counterflow diffusion flames successfully predicts the PAH behavior exhibiting a synergistic effect observed experimentally for the mixture fuels, irrespective of the type of flame (soot formation flame or soot formation/oxidation flame). The reactions that lead to this synergistic effect in PAH formation are identified through the rate-of-production analysis.     

Facile synthesis of rice shaped CuO nanostructures for battery application

The oxides of transition metals are an important class of semiconductors, which have applications in electronics, magnetic storage media, solar applications and catalysis. Among them, CuO has attracted much attention due to its widespread applications. In this paper, a facile synthesis of rice shaped CuO nanostructures have been prepared by reflux method for battery application using Copper nitrate and ammonia as precursors. Samples were prepared at three different reaction timings namely 6, 12 and 24 h. The as-prepared samples were calcinated at 400 °C to ensure the formation of copper oxide. The final products were subjected to X-ray diffraction, scanning electron microscopy, FT-IR and UV–Vis spectroscopy in order to study the effect of reaction time on the properties of the prepared copper oxide nanostructures. It is found that at controlled reaction time rice shaped CuO nanostructures are obtained. Cyclic voltammogram was recorded to understand the electrocatalytic behaviors of the rice shaped CuO sample prepared under optimized condition.     

Phenomena of reverse momentum pulse and fluid leak after poison injection in the shut down system of PHWR

The primary function of the shut down system in a nuclear reactor is to terminate any reactivity transient occurring in the core during its entire design life. Normally there is more than one system, which are independent and diverse in its mode of operation. They consist of quick acting mechanisms like dropping of safety rods by gravity, poison injection, etc. Typically in liquid poison injection system wherein high flow velocities are involved, there is significant fluid structure interaction associated with cyclic shock transients in the system. One such phenomenon has been captured and analyzed to understand the dynamics involved in the loop. The trends of loop pressure and vibration indicated presence of more than two pressure transients after complete injection of poison. The first transient arrived after 1.44 s and the second after 0.75 s. The reverse pressure pulses that manifested in the loop as a result of fast injection of fluid has been mathematically characterized by solving basic fluid balance equations. Possibility of ball lifting due to momentum pulse is also discussed.     

Caulerpa lentillifera inhibits protein-tyrosine phosphatase 1B and protects pancreatic beta cell via its insulin mimetic effect

Food Science and Biotechnology - The aim of this study was to determine whether Caulerpa lentillifea extract (CLE) can protect pancreatic beta cells and enhance insulin signaling in adipocytes. We...     

Electric Fields Obviate Constrained Sintering

The phenomenon of constrained sintering, where large rigid inclusions of alumina have been shown to significantly reduce the rate of sintering of titania [Bordia and Raj (1988) J. Am. Ceram. Soc. 71, 302–310], is shown to subside nearly completely during flash sintering carried out under modest electrical fields. The result is explained by a different mechanism for volumetric and shear deformation under electric fields. It is proposed that vacancy and interstitials generated within the grains migrate to grain boundaries and pores to produce both volumetric and shear strain at equal rates, since, in this way, the diffusion distance for both modes of deformation becomes the same. In conventional sintering, where transport occurs from one interface to another, the diffusion distance for shear is twice as far as for densification, which retards sintering should it become controlled by shear deformation, as seen in constrained sintering.