Kinetics of self-repair in inorganic glasses: modeling and experimental verification

A novel concept of self-repairable glass useful as seals in solid oxide fuel cells (SOFCs) is proposed, developed, and used for making metal-glass–ceramic seals for enhancing reliability and life. In this concept, cracks created during SOFC operation are repaired by the crack healing process driven by the viscous flow of the glass. An approach for studying the kinetics of crack healing in glasses responsible for the self-repair is described and used to study the crack healing behavior. The cracks are created by a microindenter, and the progression of healing of cracks thus created on a silicate glass surface is experimentally determined at different annealing temperatures and times. Sequential changes in the crack morphology during thermal healing are also studied to identify the three stages of crack healing process. A crack healing model, based on the relationship among crack length, time, temperature, glass viscosity, and its flow behavior is developed in order to describe and predict the time required for self-repair on a glass surface. The predictions from the developed model is then compared with the experimental data and found to be in good agreement. These results also demonstrated the relative importance of the different stages of crack healing on the overall healing or self-repair behavior.     

Optimisation of process parameters for electroless nickel plating on SS316L for refrigeration systems

Nowadays, refrigeration systems are important for industrial and domestic applications. The coefficient of performance of a vapour compression refrigeration system can be improved if a reduction in the work of compression can be achieved by a suitable technique for a specified heat removal rate. The present study investigates the effect of material coating of electroless nickel (EN) plating. The friction and wear experiments were performed using a four-ball machine tribo tester. Controlling the EN plating parameters plays an important role in the quality of coating. It depends on the wear scar rate of the coated material. So it is necessary to optimise the process parameters of EN plating. The experimental studies have been conducted under varying pressure, load and time on quality characteristics. In this paper, optimisation of process parameters using response surface methodology technique for EN plating was discussed.     

Additive Manufacturing of Ceramics Enabled by Flash Pyrolysis of Polymer Precursors with Nanoscale Layers

We show that a polymer‐based route to ceramics can be implemented into additive manufacturing by reducing the time for pyrolysis to about a second, which we call flash pyrolysis. Repetitive deposition of nanometer scale coatings of the ceramic, in this way, is employed to create defect‐free infiltrations of carbon fiber composites. The mechanical strength of the fibers is retained in the composite. Excellent wetting properties of the polymer precursor permits three‐dimensional, conformal coating through the three stages of infiltration: nanoscale coating of the single fibers, filling of interstitial spaces between the fibers, and a buildup of the coating over the entire composite. The flash pyrolysis method will enable a new genre of polymer‐derived ceramics made into net shape by this unusual method of additive manufacturing.     

The Change of X‐ray Diffraction Peak Width During in situ Conventional Sintering of Nanoscale Powders

Diffraction peaks of nanoscale particles of 3 mol% yttria‐stabilized zirconia become sharper as the powder sinters. The reduction in the peak width is correlated with the increase in density. The sharpening of the peak agrees reasonably well with the remaining free surface area as the sample sinters. Therefore, high curvature of the free surface of the pores is assumed to lead to peak broadening (the grain boundaries that grow at the expense of the free surfaces of the pores do not have this curvature). The change in the grain size during sintering does not make a significant contribution to peak width.     

Effect of mass recovery evaporator temperature and condenser temperature on the performance of a solar adsorption-based desalination plant

Water scarcity increases alarmingly as the population increases. Over the years, a number of salt water desalination techniques have been proposed and reached limitations. The requirement of minimum energy is very well satisfied by an adsorption system, since it can operate with low-grade energy and waste heat exhaust from most industries. The first part of this work discusses the effect of condenser and evaporator temperatures on the performance of silica-gel adsorption cycle mathematically. The second part discusses the performance variations due to mass recovery in the two-bed adsorption system mathematically. It was found that the reduction in condenser temperature and increase in the evaporator temperature both increase the fresh water productivity and cooling capacity of a plant. A desalination plant with mass recovery assistance is superior in performance than the conventional plant. Portable water productivity of 8?m³/day/ton is achieved with the condenser temperature of 15°C and the evaporator temperature of 30°C.     

Synthesis of nanostructured copper hexacyanidoferrate and its application in voltammeteric detection of salbutamol

Nanostructured copper hexacyanidoferrate has been synthesized and characterized using elemental analysis, atomic absorption spectroscopy, thermal and infrared spectral studies. The transmission electron microscopic studies of the synthesized material showed that it consisted of irregular oval and rod shaped particles with a size range 70–100 nm. Nanostructured copper hexacyanidoferrate modified glassy carbon electrode was characterized by cyclic voltammetery and nanostructured copper hexacyanidoferrate–carbon nanotube composite material modified glassy carbon electrode has been used for electrocatalytic oxidation of salbutamol. The electrode modified with composite material was found to reduce the peak potential of oxidation of salbutamol by nearly 90 mV.     

Nanocomposites based on transition metal oxides in polyvinyl alcohol for EMI shielding application

In the present work, the nanocomposites based on different transition metal oxides like iron oxide (Fe₂O₃), zinc oxide (ZnO), silicon dioxide (SiO₂), zirconium dioxide (ZrO₂), and titanium dioxide (TiO₂) in PVA matrix have been studied for their suitability as electromagnetic interference (EMI) shielding materials in the frequency range of 4–8 GHz (C-band) and 8–12 GHz (X-band). The nanocomposites containing 0.1, 0.5, 1.0, 5.0, and 10.0 wt% of oxides in the matrix were synthesised by solvent casting method. The EMI attenuation studies in 4–12 GHz frequency range were carried out using the Vector Network Analyzer R & S: ZVA40 method by measuring the loss due to reflection. The minimum reflectivity values for the composites containing Fe₂O₃, ZnO, SiO_2, ZrO₂, and TiO₂ in PVA matrix at 10 wt% concentration level in the matrix were found to be ?38.85 dB (10.4 GHz), ?33.65 dB (10.4 GHz), ?41.90 dB (10.4 GHz), ?24.90 dB (11.0 GHz), and ?32.90 dB (9.76 GHz), respectively. Based on these results, the SiO₂- and Fe₂O₃-based composites, which also exhibit high thermal stability and mechanical strength, are found to be low-cost and efficient EMI shielding materials.     

Phase behaviour modelling of Athabasca bitumen for in situ combustion applications

Phase behaviour modelling of reservoir fluid is a fundamental step for reservoir simulation. Furthermore, as the complexity of the recovery process increases, the fluid model plays a more important role in the reliability of the simulation outputs. Although the in situ combustion enhanced oil recovery method (ISC) is one of the most complex recovery techniques available in the petroleum engineering literature, for most of the simulation jobs related to this elaborate process only simple and rudimentary fluid characterization layouts are considered. In this work, the principal fluid properties of Athabasca bitumen with regard to the ISC process are recognized, extracted from the literature, validated for consistency, and used for the development of an inclusive and accurate fluid model. Then the fluid model is fully developed while considering the ISC reaction kinetics so that the model has both accuracy, indispensable for phase behaviour modelling, and consistency, essential for the reactions definitions.