Phase behaviour modelling of Athabasca bitumen for in situ combustion applications

Phase behaviour modelling of reservoir fluid is a fundamental step for reservoir simulation. Furthermore, as the complexity of the recovery process increases, the fluid model plays a more important role in the reliability of the simulation outputs. Although the in situ combustion enhanced oil recovery method (ISC) is one of the most complex recovery techniques available in the petroleum engineering literature, for most of the simulation jobs related to this elaborate process only simple and rudimentary fluid characterization layouts are considered. In this work, the principal fluid properties of Athabasca bitumen with regard to the ISC process are recognized, extracted from the literature, validated for consistency, and used for the development of an inclusive and accurate fluid model. Then the fluid model is fully developed while considering the ISC reaction kinetics so that the model has both accuracy, indispensable for phase behaviour modelling, and consistency, essential for the reactions definitions.     

Biocomposite proton‐exchange membrane electrolytes for direct methanol fuel cells

Poly(vinyl alcohol) (PVA)‐amino acid (AA) biocomposite membranes are prepared by blending PVA with AAs such as glycine, lysine (LY), and phenyl alanine followed by in situ crosslinking with citric acid (CA) and explored as a new class of biocomposite membrane electrolytes for direct methanol fuel cells (DMFCs). CA crosslinks with PVA through esterification offers adequate chemical, thermal, and morphological stability thereby produces methanol‐obstructing close‐packed polymeric network. These biocomposite membranes are characterized in terms of mechanical, thermal, sorption, and proton‐conducting properties. Hydrophilic nature of AA zwitterions significantly facilitates proton conduction and CA crosslinking mitigates methanol crossover through establishing appropriate balance between hydrophilic/hydrophobic domains. The rational design of membrane microstructure with proper arrangement of hydrophobic/hydrophilic domains is a key to enhance electrochemical selectivity of PVA‐AA/CA biocomposite membranes. Biocomposite membrane comprising LY exhibits nearly threefold higher electrochemical selectivity in relation to PVA/CA blend membrane. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43514.     

Solid Yttria-Stabilized Zirconia Films by Pulsed Chemical Vapor Deposition from Metal-organic Precursors

A pulsed chemical vapor deposition from metal-organic precursors (MOCVD) system was used to produce solid zirconia, and yttria-stabilized zirconia (YSZ) films. A total of six candidate metal-organic precursors for zirconia and three for yttria were investigated. Three precursor solutions for YSZ proved suitable for pulsed-MOCVD processing. Layers were deposited on metal, alumina, and porous nickel cermet substrates. Under optimal deposition conditions, precursor conversion efficiency of 90% was achieved using a solution of 3.74 vol% zirconium 2-methyl-2-butoxide + 0.42% yttium methoxyethoxide in toluene. The film growth rate was 7.5 μm·h⁻¹ at 525°C deposition temperature. Two alkoxide precursors produced YSZ layers with material costs under $0.50/(μm·cm²).     

Yield and Quality Characteristics of Rendered Chicken Oil for Biodiesel Production

Whole dead poultry birds obtained from commercial layer farms were assessed for fat in the whole carcass and then dry rendered in three different rendering regimens T₁, T₂ and T₃ (temperature = 120, 130 and 140 °C and shell pressure = 1, 2 and 3 kg/cm² respectively) and the effect on the yield and quality of the rendered chicken oil were studied. The overall fat percentage of the whole dead poultry carcass was 14.55 ± 0.17 % and the fat content of ‘greaves’ was 14.49 ± 0.38 %. In the dry batch rendering trials, the mean overall fat recovery was 24.46 ± 1.19, 26.78 ± 3.14 and 22.42 ± 2.32 % and the overall fat yield was 3.52 ± 1.72, 3.84 ± 0.44 and 3.22 ± 0.33 % of the carcass weight in T₁, T₂ and T₃ respectively. Solvent extraction of fat could recover 96.10 ± 0.14 % of fat from ‘greaves’ which was significantly higher than the mechanical centrifugation method. Among the quality characteristics of the rendered chicken oil (RCO), moisture content ranged from 0.61 % (T₂) to 1.09 % (T₁) and the mean specific gravity was 0.91 at 30 °C. The FFA values of RCO obtained from the T₃ rendering regimen were significantly (p < 0.05) higher than the FFA values of T₂ and T₁. The mean acid value, iodine number, peroxide value, saponification value and unsaponifiable matter present in RCO showed no significant difference. The fatty acid profile and calorific values were studied. The RCO was converted to biodiesel by transesterification and the physico-chemical properties of the biodiesel were studied and compared with the Indian biodiesel specification.     

A green and facile one-pot synthesis of Ag–ZnO/RGO nanocomposite with effective photocatalytic activity for removal of organic pollutants

In this study, Ag–ZnO/reduced graphene oxide (Ag–ZnO/RGO) composite was synthesized by a green and facile one-step hydrothermal process. Aqueous suspension containing Ag and ZnO precursors with graphene oxide (GO) sheets was heated at 140 °C for 2 h. The morphology and structure of as-synthesized particles were characterized by field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman spectroscopy, and Photoluminescence (PL) spectroscopy which revealed the formation of composite of metal, metal oxide and RGO. It was observed that the presence of Ag precursor and GO sheets in the hydrothermal solution could sufficiently decrease the size of ZnO flowers. The hybrid nanostructure, with unique morphology, obtained from this convenient method (low temperature, less time, and less number of reagents) was found to have good photocatalytic and antibacterial activity. The perfect recovery of catalyst after reaction and its unchanged efficiency for cyclic use showed that it will be an economically and environmentally friendly photocatalyst.     

Melt‐mixed polypropylene/acrylonitrile‐butadiene‐styrene blends with multiwall carbon nanotubes: Effect of compatibilizer and modifier on morphology and electrical conductivity

Cocontinuous blends of 45/55 polypropylene (PP)/acrylonitrile‐butadiene‐styrene (ABS) with multiwall carbon nanotubes (MWNT) were prepared by melt‐mixing in a conical twin‐screw microcompounder. PP‐grafted‐maleic anhydride (PP‐g‐MA) and styrene MA were used as compatibilizers for PP/ABS blends. Scanning electron microscopic observations showed phase segregation of PP‐g‐MA in the blends. State of dispersion of MWNT in the presence or absence of the compatibilizers was assessed through AC electrical conductivity measurements and crystallization studies of the blends. An improvement in AC electrical conductivity was observed in blends in presence of either styrene MA or dual compatibilizers. The lowest electrical percolation threshold was achieved at 0.1 wt % of MWNT using sodium salt of 6‐amino hexanoic acid‐modified MWNT. Significant increase in crystallization temperature of PP phase of blends with MWNT was observed in the presence of compatibilizers as compared to blends without compatibilizers. An attempt has been made to address the complex issues of phase segregation, compatibilization, and dispersion of MWNT in cocontinuous blends of PP/ABS. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Dynamic mechanical analysis and broadband electromagnetic interference shielding characteristics of poly (vinyl alcohol)-poly (4-styrenesulfonic acid)-titanium dioxide nanoparticles based tertiary nanocomposites

ABSTRACT

Novel tertiary nanocomposite films comprising of poly (vinyl alcohol) (PVA), poly (4-styrenesulfonic acid) (PSSA) and titanium dioxide (TiO₂) nanoparticles (NP_S) were prepared using simple solvent casting method. The structural, thermal, morphological, thermo-mechanical and electromagnetic interference (EMI) shielding properties of PVA/PSSA/TiO₂ nanocomposite films were investigated. The EMI shielding effectiveness (SE) of PVA/PSSA/TiO₂ nanocomposite films in the X and Ku band was found to be 12 dB and 13 dB respectively at 25 wt% TiO₂ NPs loading. These results demonstrate the possible applications of PVA/PSSA/TiO₂ nanocomposite films as low cost, lightweight and flexible material for EMI shielding.     

An EXAFS study of Cu/ZnO and Cu/ZnO-Al2O3 methanol synthesis catalysts

Cu K-absorption edge and EXAFS measurements on binary Cu/ZnO and ternary Cu/ ZnO-Al₂O₃ catalysts of varying compositions on reduction with hydrogen at 523 K, show the presence of Cu microclusters and a species of Cu¹⁺ dissolved in ZnO apart from metallic Cu and Cu₂O. The proportions of different phases critically depend on the heating rate especially for catalysts of higher Cu content. Accordingly, hydrogen reduction with a heating rate of 10 K/min predominantly yields the metal species (>50%), while a slower heating rate of 0.8 K/min enhances the proportion of the Cu¹⁺ species ( 60%). Reduced Cu/ZnO-Al₂O₃ catalysts show the presence of metallic Cu (upto 20%) mostly in the form of microclusters and Cu¹⁺ in ZnO as the major phase ( 60%). The addition of alumina to the Cu/ZnO catalyst seems to favour the formation of Cu¹⁺/ZnO species.     

A reaction mechanism for gasoline surrogate fuels for large polycyclic aromatic hydrocarbons

This work aims to develop a reaction mechanism for gasoline surrogate fuels (n-heptane, iso-octane and toluene) with an emphasis on the formation of large polycyclic aromatic hydrocarbons (PAHs). Starting from an existing base mechanism for gasoline surrogate fuels with the largest chemical species being pyrene (C₁₆H₁₀), this new mechanism is generated by adding PAH sub-mechanisms to account for the formation and growth of PAHs up to coronene (C₂₄H₁₂). The density functional theory (DFT) and the transition state theory (TST) have been adopted to evaluate the rate constants for several PAH reactions. The mechanism is validated in the premixed laminar flames of n-heptane, iso-octane, benzene and ethylene. The characteristics of PAH formation in the counterflow diffusion flames of iso-octane/toluene and n-heptane/toluene mixtures have also been tested for both the soot formation and soot formation/oxidation flame conditions. The predictions of the concentrations of large PAHs in the premixed flames having available experimental data are significantly improved with the new mechanism as compared to the base mechanism. The major pathways for the formation of large PAHs are identified. The test of the counterflow diffusion flames successfully predicts the PAH behavior exhibiting a synergistic effect observed experimentally for the mixture fuels, irrespective of the type of flame (soot formation flame or soot formation/oxidation flame). The reactions that lead to this synergistic effect in PAH formation are identified through the rate-of-production analysis.