Effect of thermal spike energy created in CuFe2O4 by 150 MeV Ni swift heavy ion irradiation

Effects of 150 MeV Ni¹¹⁺ swift heavy ion (SHI) irradiation on copper ferrite nanoparticles have been studied at the fluences of 1 × 10¹¹, 1 × 10¹², 1 × 10¹³, 1 × 10¹⁴ and 5 × 10¹⁴ ions/cm². The XRD pattern shows the irradiation fluence dependant preferential orientation. Scanning electron microscope analysis displays fine blocks of material for pristine while partial agglomeration on irradiation. Notably, a large number of holes are present at the fluence of 5 × 10¹⁴ ions/cm². The magnetization measurements performed in these samples exposes that the coercivity and remanence magnetization value increases due to the magnetocrystalline anisotropy up to the fluence of 1 × 10¹³ ions/cm². At 1 × 10¹⁴ ions/cm² fluence, the induced thermal energy overcomes the magnetocrystalline anisotropy constant and causes a decrease in coercivity and remanence values. The saturation magnetization decreases up to the fluence of 1 × 10¹³ ions/cm² and then it increases for further irradiation. The change of crystalline orientation observed from XRD, the creation of holes from SEM and the change in magnetic properties are discussed on the basis of electro-phonon coupling and it invokes the thermal spike theory.     

Role of SiC on Mechanical,Tribological and Thermal Expansion Characteristics of B4C/Talc-Reinforced Al-6061 Hybrid Composite

Silicon - A hybrid SiC/B4C/Talc reinforced Al-6061 metal matrix composite with improved machinability, wear resistance and low thermal expansion is prepared and evaluated. The primary aim of this...     

High Performance Reversible Direct Data Synthesizer for Radio Frequency Applications

Mobile Networks and Applications - Design of Reversible logic gate enabled Reconfigurable Direct digital synthesizer is evaluated here. The need for Direct Digital Synthesizers (DDS) inherently...     

Self‐similarity analysis of vehicle driver's electrodermal activity

This paper characterizes stress levels via a self‐similarity analysis of the electrodermal activity (EDA) collected in a real‐world driving context. To characterize the EDA richness over scales, the fractional Brownian motion (FBM) process and its corresponding exponent H, estimated via a wavelet‐based approach, are used. Specifically, an automatic scale range selection is proposed in order to detect the linearity in a log scale diagram. The procedure is applied to the EDA signals, from the open database drivedb, originally captured on the foot and the hand of the drivers during a real‐world driving experiment, designed to evoke different levels of arousal and stress. The estimated Hurst exponent H offers a distinction in stress levels when driving in highway versus city, with a reference to restful state of minimal stress level. Specifically, the estimated H values tend to decrease when the driving environmental complexity increases. In addition, the estimated H values on the foot EDA signals allow a better characterization of the driving task than that of hand EDA. The self‐similarity analysis was applied to various physiological signals in literature but not to the EDA so far, a signal which was found to correlate most with human affect. The proposed analysis could be useful in real‐time monitoring of stress levels in urban driving spaces, among other applications.     

Heavy metal accumulation in vegetables irrigated with water from different sources

The present study was carried out to assess levels of different heavy metals like iron, manganese, copper and zinc, in vegetables irrigated with water from different sources. The results indicated a substantial build-up of heavy metals in vegetables irrigated with wastewater. The range of various metals in wastewater-irrigated plants was 116–378, 12–69, 5.2–16.8 and 22–46 mg/kg for iron (Fe), manganese (Mn), copper (Cu) and zinc (Zn), respectively. The highest mean levels of Fe and Mn were detected in mint and spinach, whereas the levels of Cu and Zn were highest in carrot. The present study highlights that both adults and children consuming vegetables grown in wastewater-irrigated soils ingest significant amount of these metals. However, the values of these metals were below the recommended maximum tolerable levels proposed by the [Joint FAO/WHO Expert Committee on Food Additives (1999). Summary and conclusions. In 53rd Meeting, Rome, June 1–10, 1999]. However, the regular monitoring of levels of these metals from effluents and sewage, in vegetables and in other food materials is essential to prevent excessive build-up of these metals in the food chain.     

Biosorption of Cr(VI) by immobilized biomass of two indigenous strains of cyanobacteria isolated from metal contaminated soil

Biosorption of Cr(VI) using native strains of cyanobacteria from metal contaminated soil in the premises of textile mill has been reported in this paper. Biosorption was studied as a function of pH (1-5), contact time (5-180 min) and initial chromium ion concentration (5-20mg/l) to find out the maximum biosorption capacity of alginate immobilized Nostoc calcicola HH-12 and Chroococcus sp. HH-11. The optimum conditions for Cr(VI) biosorption are almost same for the two strains (pH 3-4, contact time 30 min and initial chromium concentration of 20mg/l) however, the biomass of Chroococcus sp. HH-11 was found to be more suitable for the development of an efficient biosorbent for the removal of Cr(VI) from wastewater, as it showed higher values of q(m) and K(f), the Langmuir and Freundlich isotherm parameters. Both the isotherm models were suitable for describing the biosorption of Cr(VI) by the cyanobacterial biosorbents.     

NRP/B, a novel nuclear matrix protein, associates with p110(RB) and is involved in neuronal differentiation

The nuclear matrix is defined as the insoluble framework of the nucleus and has been implicated in the regulation of gene expression, the cell cycle, and nuclear structural integrity via linkage to intermediate filaments of the cytoskeleton. We have discovered a novel nuclear matrix protein, NRP/B (nuclear restricted protein/brain), which contains two major structural elements: a BTB domain-like structure in the predicted NH2 terminus, and a "kelch motif" in the predicted COOH-terminal domain. NRP/B mRNA (5.5 kb) is predominantly expressed in human fetal and adult brain with minor expression in kidney and pancreas. During mouse embryogenesis, NRP/B mRNA expression is upregulated in the nervous system. The NRP/B protein is expressed in rat primary hippocampal neurons, but not in primary astrocytes. NRP/B expression was upregulated during the differentiation of murine Neuro 2A and human SH-SY5Y neuroblastoma cells. Overexpression of NRP/B in these cells augmented neuronal process formation. Treatment with antisense NRP/B oligodeoxynucleotides inhibited the neurite development of rat primary hippocampal neurons as well as the neuronal process formation during neuronal differentiation of PC-12 cells. Since the hypophosphorylated form of retinoblastoma protein (p110(RB)) is found to be associated with the nuclear matrix and overexpression of p110(RB) induces neuronal differentiation, we investigated whether NRP/B is associated with p110(RB). Both in vivo and in vitro experiments demonstrate that NRP/B can be phosphorylated and can bind to the functionally active hypophosphorylated form of the p110(RB) during neuronal differentiation of SH-SY5Y neuroblastoma cells induced by retinoic acid. Our studies indicate that NRP/B is a novel nuclear matrix protein, specifically expressed in primary neurons, that interacts with p110(RB) and participates in the regulation of neuronal process formation.     

High Thermal Conductivity Polymer Composites Fabrication through Conventional and 3D Printing Processes: State-of-the-Art and Future Trends

The lifespan and the performance of flexible electronic devices and components are affected by the large accumulation of heat, and this problem must be addressed by thermally conductive polymer composite films. Therefore, the need for the development of high thermal conductivity nanocomposites has a strong role in various applications. In this article, the effect of different particle reinforcements such as single and hybrid form, coated and uncoated particles, and chemically treated particles on the thermal conductivity of various polymers are reviewed and the mechanism behind the improvement of the required properties are discussed. Furthermore, the role of manufacturing processes such as injection molding, compression molding, and 3D printing techniques in the production of high thermal conductivity polymer composites is detailed. Finally, the potential for future research is discussed, which can help researchers to work on the thermal properties enhancement for polymeric materials.     

Heterologous Expression and Partial Characterization of a Putative Opine Dehydrogenase from a Metagenomic Sequence of Desulfohalobium retbaense

The aim of this research was to prove the function of the putative opine dehydrogenase from Desulfohalobium retbaense and to characterize the enzyme in terms of functional and kinetic parameters. A putative opine dehydrogenase was identified from a metagenomic library by a sequence-based technique search of the metagenomic library, and afterward was successfully heterologously produced in Escherichia coli. In order to examine its potential for applications in the synthesis of secondary amines, first the substrate specificity of the enzyme towards different amino donors and amino acceptors was determined. The highest affinity was observed towards small amino acids, preferentially L-alanine, and when it comes to α-keto acids, pyruvate proved to be a preferential amino acceptor. The highest activity was observed at pH 6.5 in the absence of salts. The enzyme showed remarkable stability in a wide range of experimental conditions, such as broad pH stability (from 6.0–11.0 after 30 min incubation in buffers at a certain pH), stability in the presence of NaCl up to 3.0 M for 24 h, it retained 80 % of the initial activity after 1 h incubation at 45 °C, and 65 % of the initial activity after 24 h incubation in 30 % dimethyl sulfoxide.