AC impedance study on the activation mechanism of aluminium by indium and zinc in 3.5% NaCl medium

Activation of aluminium by In³⁺ and Zn²⁺ ions in chloride media has been investigated by using potentiodynamic polarisation, potential vs. time measurements, electrochemical impedance spectroscopy and scanning electron microscopy studies. It is suggested that indium exhibits In⁺ and In²⁺ intermediates during the dissolution and redeposition processes. Incorporation of any of these lower valent ions changes the defect structure of the passive film, leading to an increase in anionic vacancies and a decrease in the number of electrons, promoting active dissolution of aluminium. The role of zinc is to moderate localised attack by increasing the electron concentration and cation mobility, thereby lowering the corrosion rate at activated sites.     

Performance Evaluation of Cost-Effective Multicast–Unicast Key Management Method

Group key management is one of the key security issues in multicast networks. The main challenge is to provide a secure group key management method which avoids high key update cost in terms of the number of transmitted keys. In order to achieve low key update cost for group key management, most of the existing methods increase their encryption/decryption cycles which requires a strong cryptographic function. In this paper, a cost-effective key management method is proposed to address the problem of high key update cost without increasing the encryption/decryption cycles. We evaluated our proposed method with existing tree-based methods by using Markov chain and Poisson Arrival Process. Results indicate the efficiency of our proposed method in reducing the key update cost significantly compared to the existing tree-based key management methods.     

Finite element modelling and vibration control study of active plate with debonded piezoelectric actuators

A finite element model for a piezoelectric plate with edge debonded actuators is presented. This model is employed to investigate the effect of edge debonding on actuation authority, natural frequencies and vibration control performance. The regions of the plate with the piezoelectric patches are modelled such that each layer undergoes rotation due to shear deformation independently. The necessary constraints for continuity of displacements at the interfaces of the layers are imposed. The plate with edge debonded actuators is idealized by dividing it into debonded regions and healthy regions. A finite element procedure for imposing the constraints regarding continuity of displacements at the interfaces of the adjacent regions is developed and is implemented using MATLAB. Experiments are conducted for finding the actuation authority and natural frequencies of the plate with debonded actuators. It has been found that the developed model has predicted the mechanics of actuator debonding properly. The investigations have revealed the fact that the edge debonding of actuators will result in considerable degradation in actuation authority and vibration control performance.     

Finite element simulations of notch tip fields in magnesium single crystals

Recent experiments using three point bend specimens of Mg single crystals have revealed that tensile twins of \(\{10\bar{1}2\}\) -type form profusely near a notch tip and enhance the fracture toughness through large plastic dissipation. In this work, 3D finite element simulations of these experiments are carried out using a crystal plasticity framework which includes slip and twinning to gain insights on the mechanics of fracture. The predicted load–displacement curves, slip and tensile twinning activities from finite element analysis corroborate well with the experimental observations. The numerical results are used to explore the 3D nature of the crack tip stress, plastic slip and twin volume fraction distributions near the notch root. The occurrence of tensile twinning is rationalized from the variation of normal stress ahead of the notch tip. Further, deflection of the crack path at twin–twin intersections observed in the experiments is examined from an energy standpoint by modeling discrete twins close to the notch root.     

Quantum dot sensitized aluminium doped and copper doped ZnO nanostructure based solar cells

Aluminium doped and copper doped ZnO nanostructured thin films have been prepared using simple solgel dip coating method. The X-ray diffraction pattern results revealed that the prepared Al and Cu doped ZnO sample exhibits hexagonal structure. The average crystallite size of pure ZnO, Al doped ZnO and Cu doped ZnO samples were found to be 29, 26 and 15 nm, respectively. The optical band gap of ZnO, Al doped ZnO and Cu doped ZnO thin films was found to be 3.27, 3.29, and 3.20 eV respectively. Solar cells have been fabricated using CdS quantum dots sensitized ZnO nanostructured thin films and the efficiency of the fabricated Al doped and Cu doped ZnO solar cells were 1.37 and 1.29 % respectively.     

Space solar cells—tradeoff analysis

This paper summarizes the study that had the objective to tradeoff space solar cells and solar array designs to determine the best choice of solar cell and array technology that would be more beneficial in terms of mass, area and cost for different types of space missions. Space solar cells, which are commercially now available in the market and to be available in the near future, were considered for this trade study. Four solar array designs: rigid, flexible, thin film flexible and concentrator solar arrays were considered for assessment. Performance of the solar cells along with solar array designs were studied for two types of space missions: geo synchronous orbit (GEO) and low earth orbit (LEO) spacecraft. The Solar array designs assumed were to provide 15 kW power for 15 years mission life in GEO and 5 kW power for 5 years mission life in LEO altitudes. To perform tradeoff analysis a spread sheet model was developed that calculates the size, mass and estimates the cost of solar arrays based on different solar cell and array technologies for given set of mission requirements. Comparative performance metrics (W/kg, W/m², kg/m², and $/W) were calculated for all solar arrays studied and compared, at the solar array subsystem level and also at the spacecraft system level. The trade analysis results show that high-efficiency multijunction solar cells bring lot of cost advantages for both types of missions. The trade study also show that thin film solar cells with moderate efficiency with ultra lightweight flexible array design may become competitive with well-established single crystalline solar cell technologies in the future.     

Topological Patterns for Scalable Representation and Analysis of Dataflow Graphs

Tools for designing signal processing systems with their semantic foundation in dataflow modeling often use high-level graphical user interfaces (GUIs) or text based languages that allow specifying applications as directed graphs. Such graphical representations serve as an initial reference point for further analysis and optimizations that lead to platform-specific implementations. For large-scale applications, the underlying graphs often consist of smaller substructures that repeat multiple times. To enable more concise representation and direct analysis of such substructures in the context of high level DSP specification languages and design tools, we develop the modeling concept of topological patterns, and propose ways for supporting this concept in a high-level language. We augment the dataflow interchange format (DIF) language—a language for specifying DSP-oriented dataflow graphs—with constructs for supporting topological patterns, and we show how topological patterns can be effective in various aspects of embedded signal processing design flows using specific application examples.