Condensation polymerization of pyrogallol and benzaldehyde

Novolac-type polycondensation of benzaldehyde (B) and pyrogallol (P) has been carried out at 60°C, 75°C and 90°C and at B/P mole ratios of 1.5 and 3.0 using phosphoric acid as catalyst. The reaction follows a 2nd order rate law. By using GC consumption data of benzaldehyde and pyrogallol, kinetic parameters such as the overall rate constants, activation energies (E_a) and logA values are investigated. The activation energies for 1.5 and 3.0 B/P mole ratios are found as 62.3 kJ mol^?1 and 56.4 kJ mol^?1, respectively. The molecular weights of the resins determined by measuring intrinsic viscosities (25°C, THF) are in the range of 0.03 to 0.07 dL g^?1 at various temperatures and B/P mole ratios.     

Deep levels,electrical and optical characteristics in SnTe-Doped GaSb Schottky Diodes

The GaSb layers investigated were grown directly on GaAs substrates by molecular beam epitaxy (MBE) using SnTe source as the n-type dopant. By using admittance spectroscopy, a dominant deep level with the activation energy of 0.23-0.26 eV was observed and its concentration was affected by the Sb₄/Ga flux ratio in the MBE growth. A lowest deep-level concentration together with a highest mobility was obtained for GaSb grown at 550°C under a Sb₄/Ga beam equivalent pressure (BEP) ratio around 7, which should correspond to the lowest ratio to maintain a Sb-stabilized surface reconstruction. In the Hall measurement, an analysis of the temperature-dependent mobility shows that the ionized impurity concentration increases proportionally with the sample’s donor concentration, suggesting that the ionized impurity was introduced by an SnTe source. In addition, optical properties of an undoped p-, a lightly and heavily SnTe-doped GaSb layers were studied by comparing their photoluminescence spectra at 4.5K.     

Uniaxial tensile response of microfibre reinforced cement composites

Microfibre reinforced cement composites reinforced with high volume fractions of carbon, steel and polypropylene fibres were tested in uniaxial tension. Composites investigated included those with only one type of fibre (mono-fibre composites) and those with two or more types of fibres (hybrid-fibre composites) in the same mix. Considerable strengthening, toughening and stiffening of the host matrix due to microfibre reinforcement were observed. In the hybrid-fibre composites, different fibres appear to act as additive phases; i.e., they maintain their individual reinforcing capabilities. The composites were also impact tested in uniaxial tension using a newly designed instrumented impact machine. When compared with static test results, considerable sensitivity to stress rate was noted; composites were found to be stronger and tougher under impact and the improvements were more pronounced at higher fibre volume fractions. The potential of these composites for use in thin sheet products and other similar applications is recognized, and the need for continued research is stressed.     

铝－锂合金中δ’（Al＿3Li）沉淀相时效粗化行为及体积分数的测定

对经固溶处理的二种Ａｌ－Ｌｉ合金（１．９４ｗｔ．％Ｌｉ和２．７５ｗｔ．％Ｌｉ）的时效过程进行了研究。结果表明：δ’的生长速率遵从Ｏｓｔｗａｒｄ粗化动力学。１．９４ｗｔ．％Ｌｉ合金δ’产生于时效过程中，而２．７５ｗｔ．％Ｌｉ合金的δ’产生于时效的前期阶段。前者的表现体积分数明显大于根据相图估算的数伍，真实体积分数则与此值接近；后者的体积分数低于根据相图估算的数值，这可能归咎于δ’固相线的位置、统计学误差及Ｌｉ更易在时效过程中贫化。     

Verification of wind resource study of a Scottish region

In a survey of the practical wind energy resource present in the Tayside Region of Scotland it was estimated that over 1500 km² of land is suitable for wind energy development in the Region after consideration of a range of physical, technical and institutional factors. Wind speed data for this survey was obtained from the Energy Technology Support Unit (ETSU) UK Wind Speed Data Package. To verify the wind speeds obtained from the ETSU package a representative sample of sites in and around the identified areas of potential in Tayside were modelled for mean annual wind speed using the Wind Atlas Analysis and Application Program (WA^sP). The wind speeds for the sites obtained from the WA^sP analysis were compared with those obtained from the ETSU UK Wind Speed Data Package and conclusions drawn as to the reliability of the Tayside wind energy survey and the general applicability of the ETSU package for broad wind energy resource assessment.     

Modification of mechanical properties of Kevlar fibre by polymer infiltration

While high-performance organic fibres such as poly (para phenylene benzobisthiazole) and Kevlar possess excellent mechanical properties under axial tension, their strength under compression is generally poor. This study focuses on a polymer infiltration approach to modify the mechanical properties of the Kevlar 49 fibre in tension as well as compression, in which various polymeric resins are infiltrated in an opened fibrillar network of Kevlar single filaments. Opening was achieved using concentrated sulfuric acid, which resulted in a strength loss at high acid concentrations. However, compared to the acid-treated fibre, both the tensile strength and strain-to-failure of the fibres were found to increase after infiltration with epoxy resins and bismaleimide polymers. Polymer infiltration also resulted in a significant improvement in the compressive strength of the Kevlar fibre, with the bismaleimide performing better than the epoxy resins. Plasma modification using ammonia was also used to enhance interfibrillar adhesion by incorporating reactive amine groups on the fibril surface     

Addressing substrate coupling in mixed-mode ICs: simulation andpower distribution synthesis

This paper describes new techniques for the simulation and power distribution synthesis of mixed analog/digital integrated circuits considering the parasitic coupling of noise through the common substrate. By spatially discretizing a simplified form of Maxwell's equations, a three-dimensional linear mesh model of the substrate is developed. For simulation, a macromodel of the fine substrate mesh is formulated and a modified version of SPICE3 is used to simulate the electrical circuit coupled with the macromodel. For synthesis, a coarse substrate mesh, and interconnect models are used to couple linear macromodels of circuit functional blocks. Asymptotic Waveform Evaluation (AWE) is used to evaluate the electrical behavior of the network at every iteration in the synthesis process. Macromodel simulations are significantly faster than device level simulations and compare accurately to measured results. Synthesis results demonstrate the critical need to constrain substrate noise and simultaneously optimize power bus geometry and pad assignment to meet performance targets     

Red blood cell glutathione status in patients with gastrointestinal malignancies treated with 5-fluorouracil

As an alternative to surgical splenectomy, partial splenic embolization was performed in seven children for hypersplenism manifested by splenomegaly, thrombocytopenia, leukopenia, and erythrocyte hemolysis. Within a few days, platelet and leukocyte counts rose significantly in all patients and were maintained in six of seven patients during a follow-up period of 9 to 69 months. Spleen size and abdominal distention also decreased significantly in all children. There were no infectious complications.