User perception study for performance evaluation of domestic defluoridation techniques for its application in rural areas

Fluoride concentrations in ground water have been monitored in rural areas of Dhar and Jhabua districts in Madhya Pradesh, India. A correlation of fluoride concentration with pH, TDS and conductivity has been estimated to identify surrogate monitoring parameter. Further, fluoride removal from drinking water has been achieved by using adsorbents specially developed for domestic applications. These adsorbents have been evaluated using three different methods namely; loose adsorbent, pre-packed sachet and packed bamboo column. Comparative evaluation of these methods has been demonstrated in the laboratory and field. The stringent limit of 1mg/L for fluoride concentration in drinking water has been achieved by use of specially designed adsorbents. A feedback from end-users in Tarapur and Ukala villages of Dhar districts Madhya Pradesh regarding the adsorbents and its acceptability has been collected. User's perception regarding these household treatments reveals encouraging response for defluoridation methods. According to user's perception loose adsorbent approach emerged out as most simple, clean and safe household defluoridation method.     

Novel aspects of wet milling for the production of microsuspensions and nanosuspensions of poorly water-soluble drugs

Micronization and nanoparticle production of poorly water-soluble drugs was investigated using single wet milling equipment operating in the attritor and stirred media modes. The drug particles in the median size range of 0.2?2??m were prepared by changing the milling mode and operating conditions of a Micros mill with a purpose of elucidating the dynamics of the wet milling process. It was determined that particle breakage due to mechanical stresses and aggregation due to insufficient stabilization are two competing mechanisms which together control the wet milling dynamics of the poorly water-soluble drugs. The study in the attritor mode using four different classes of stabilizers with six drugs indicated that steric stabilization worked better than electrostatic stabilization for the drugs studied. In addition, the existence of different minimum polymer concentrations for the stabilization of microsuspensions and nanosuspensions was indicated. The major role of a non-ionic polymer during the production of fine particles is its stabilization action through steric effects, and no experimental evidence was found to support the so-called Rehbinder effect. Periodic addition of the polymer as opposed to the addition of the polymer at the start of milling process was introduced as a novel processing method. This novel method of polymer addition provided effective stabilization and breakage of drug particles leading to a narrower and finer particle size distribution. Alternatively, it may allow shorter processing time and lower overall power consumption of the milling process for a desired particle size.     

Probing the photoresponse of individual Nb2O5 nanowires with global and localized laser beam irradiation

Photoresponse of isolated Nb(2)O(5) nanowires (NW) padded with platinum (Pt) at both ends were studied with global irradiation by a laser beam and localized irradiation using a focused laser beam. Global laser irradiation on individual NW in ambient and vacuum conditions revealed photocurrent contributions with different time characteristics (rapid and slowly varying components) arising from defect level excitations, thermal heating effect, surface states and NW-Pt contacts. With a spot size of < 1 μm, localized irradiation highlighted the fact that the measured photocurrent in this single NW device (with and without applied bias) depended sensitively on the photoresponse at the NW-Pt contacts. At applied bias, unidirectional photocurrent was observed and higher photocurrent was achieved with localized laser irradiation at reverse-biased NW-Pt contacts. At zero bias, the opposite polarity of photocurrents was detected when the two NW-Pt contacts were subjected to focused laser beam irradiation. A reduced Schottky barrier/width resulting from an increase in charge carriers and thermoelectric effects arising from the localized thermal heating due to focused laser beam irradiation were proposed as the mechanisms dictating the photocurrent at the NW-Pt interface. Comparison of photocurrents generated upon global and localized laser irradiation showed that the main contribution to the photocurrent was largely due to the photoresponse of the NW-Pt contacts.     

Multi-objective thermodynamic optimization of solar parabolic dish stirling heat engine with regenerative losses using NSGA-II and decision making

The proposed work investigates optimal values of various decision variables that simultaneously optimize power output, net-work output and second law efficiency of solar driven Stirling heat engine with regenerative heat losses, conducting thermal bridging losses using evolutionary algorithm based on NSGA-II in Matlab simulink environment. Effects of design parameters as absorber temperature, concentrating ratio, radiative and convective heat transfers are included in the analysis. Pareto frontier is obtained for triple and dual objectives and the best optimal value is selected through four different decision making techniques viz. Fuzzy, Shannon entropy, LINMAP and TOPSIS. Triple objective evolutionary approach applied to the proposed model gives power output, net-work output and second law efficiency as (38.87 kW, 1.24 kJ, 0.3156) which are 18.19, 16.78 and 31.51% lower in comparison with reversible system. With the objective of error investigation, the average and maximum error of the obtained results are figured at last.     

Development of soluble ester-linked aldehyde polymers for proteomics

High molecular weight hyperbranched polyglycerol (HPG) was selected for development as a soluble polymer support for the targeted selection and release of primary-amine containing peptides from a complex mixture. HPG has been functionalized with ester-linked aldehyde groups that can bind primary-amine containing peptides via a reductive alkylation reaction. Once bound, the high molecular weight of the polymer facilitates separation from a complex peptide mixture by employing either a 30 kDa molecular weight cutoff membrane or precipitation in acetonitrile. Following the removal of unbound peptides and reagents, subsequent hydrolysis of the ester linker releases the bound peptide into solution for analysis by mass spectrometry. Released peptides retain the linker moiety and are therefore characteristically mass-shifted. Four water-soluble cleavable aldehyde polymers (CAP1, CAP2, CAP3, and CAP4) ranging in types of linker groups, length of the linker groups, have been prepared and characterized, each demonstrating the ability to selectively enrich and sequence primary-amine peptides from a complex human proteome containing blocked (dimethylated amine) and unblocked (primary amine) peptides. The polymers have very low nonspecific peptide-binding properties while possessing significantly more reactive groups per milligram of the support than commercially available resins. The polymers exhibit a range of reactivities and binding capacities that depend on the type of linker group between the aldehyde group and the polymer. Using various linker structures, we also probed the mechanism of the observed dehydration of hydrolyzed peptides during matrix-assisted laser desorption ionization time-of-flight mass spectrometry (MALDI-TOF MS) analysis.     

Magnetic binary oxide particles (MBOP): a promising adsorbent for removal of As (III) in water

Magnetic binary oxide particles (MBOP) synthesized using chitosan template has been investigated for uptake capacity of arsenic (III). Batch experiments were performed to determine the rate of adsorption and equilibrium isotherm and also effect of various rate limiting factors including adsorbent dose, pH, optimum contact time, initial adsorbate concentration and influence of presence cations and anions. It was observed that uptake of arsenic (III) was independent of pH of the solution. Maximum adsorption of arsenic (III) was ∼99% at pH 7.0 with dose of adsorbent 1 g/L and initial As (III) concentration of 1.0 mg/L at optimal contact time of 14 h. The adsorption equilibrium data fitted well to Langmuir and Freundlich isotherm. The maximum adsorption capacity of adsorbent was 16.94 mg/g. With increase in concentration of Ca²⁺, Mg²⁺ from 50 mg/L to 600 mg/L, adsorption of As (III) was significantly reduced while for Fe³⁺ the adsorption of arsenic (III) was increased with increase in concentration. Temperature study was carried out at 293 K, 303 K and 313 K reveals that the adsorption process is exothermic nature. A distinct advantage of this adsorbent is that adsorbent can readily be isolated from sample solutions by application of an external magnetic field. Saturation magnetization is a key factor for successful magnetic separation was observed to be 18.78 emu/g which is sufficient for separation by conventional magnate.     

An Adaptive Non Reference Anchor Array Framework for Audio Retrieval in Teleconferencing Environment

In this paper, an adaptive framework for audio retrieval in live teleconferencing environments with multiple participants is proposed. The framework uses a non reference anchor array (NRA) to capture the interfering speech sources, in addition to the primary array that captures the speech source of interest (SOI). A linearly constrained-minimum variance (LC-MV) beamformer is used herein such that the signal coming from the look direction is preserved while interferences coming from the non look direction are nulled. Additionally, the reverberant component of the speech acquired by this framework is removed by a novel method that uses the linear prediction (LP) residual cepstrum. This method does not require the computation of the acoustic impulse response (AIR) of the teleconferencing room and hence is computationally efficient. The NRA framework is therefore able to remove correlated noise coming from the direction of the SOI and also dereverberating the noise free signal. The performance of the proposed framework is evaluated by conducting experiments on clean speech acquisition from distant microphone arrays. Experiments on distant speech recognition are also conducted using the TIMIT and MONC databases. Experimental results obtained from the proposed framework indicate a reasonable improvement over correlation, subspace and standard minimum variance beamforming methods. The application of the framework in audio retrieval in a live teleconferencing environment with multiple participants is also discussed.     

Study of heat and mass transfer in indoor conditions for distillation

An indoor simulation study was carried out to evaluate heat and mass transfer relation for a semi-cylindrical metallic (opaque) condensing cover for higher yields at different operating temperatures under free and forced modes of operation. The objective is to design a distillation unit for higher yield for commercialization, particularly in India. Experiments have been conducted for the operating temperature range of 40°C to 80°C in a steady-state condition by using constant temperature bath. Data (temperature and yield) obtained from experimentation have been used to determine the values of coefficient C and n and, consequently, convective as well as evaporative heat transfer coefficients. It is inferred that a higher yield is obtained with an increase of temperature in the forced mode of operation as compared to that in the natural mode of operation due to a fast release of heat from the condensing cover.     

Bioavailability Prediction of Polycyclic Aromatic Hydrocarbons in Field-Contaminated Sediment by Mild Extractions

Assessing the bioavailability of a group of polycyclic aromatic hydrocarbons (PAHs) coexisting in a field-aged contaminated sediment was examined using mild extractions by isopropanol- and ethanol-water solutions at concentrations of 5–100%, using extraction durations from 1?h?to?7?days. At a given solvent concentration, an initial rapid phase of PAH desorption was generally observed during the first 12?h, followed by a subsequent slower phase of desorption. A similar biphasic desorption was evident with increases in solvent concentration. PAH removal by various mild extractions was compared with PAH biodegradation by indigenous microorganisms. The removal of individual PAHs using 1-day 70% ethanol extraction was closely correlated to corresponding PAH removal via biodegradation, suggesting the possibility of using alcohol-water solution to simultaneously predict the bioavailability of multiple PAHs in aged sediments to indigenous microorganisms.     

Standard molar Gibbs energy of formation of Pb5Bi8O17 and PbBi12O19 and phase diagram of the Pb-Bi-O system

Equilibrium phase fields of the ternary Pb-Bi-O system were established by long-term equilibration in the temperature range 660-840 K. Using these results, the partial phase diagram of the ternary system has been constructed. The standard molar Gibbs energy of formation of the ternary oxides, 〈Pb₅Bi₈O₁₇〉 and 〈PbBi₁₂O₁₉〉, was determined by measuring the equilibrium oxygen partial pressures over the relevant phase fields by static manometry in conjunction with a solid oxide electrolyte-based emf cell. Further, the standard molar Gibbs energy of formation of 〈Pb₃O₄〉 was also measured by the manometric method. The oxide that coexists with the Pb-Bi eutectic alloy (LBE) has been experimentally confirmed as [β-PbO]_ss. Using the thermochemical data measured, the compositions of Pb-Bi alloys that coexist with [β-PbO]_ss and ternary oxides were derived and reported.