Asbestos free friction composition for brake linings

An asbestos free friction material composite for brake linings is synthesized containing fibrous reinforcing constituents, friction imparting and controlling additives, elastomeric additives, fire retarding components and a thermosetting resin. The composite shows exemplary friction characteristics and has great resistance to wear and shows good temperature stability.     

Kaolin modified with sodium salt of rubber seed oil as a reinforcing filler for blends of natural rubber,polybutadiene rubber and acrylonitrile–butadiene rubber

Blends of natural rubber (NR) and synthetic rubbers are widely used in the rubber industry to meet specific performance requirements. Further, the emerging field of organomodified clay/rubber nanocomposites could provide a host of novel materials having a unique combination of properties to meet various stringent service conditions. Previous studies have shown that at very low dosages, china clay (kaolin) modified with sodium salt of rubber seed oil (SRSO) improved the cure characteristics and physico‐mechanical properties of NR. Results of the present study show improved cure characteristics and physico‐mechanical properties for blends of NR with butadiene rubber and nitrile rubber containing 4 phr of SRSO‐modified kaolin as indicated by reduction in optimum cure time along with higher tensile strength, tensile modulus and elongation at break for their vulcanizates as compared to those containing unmodified kaolin. The SRSO‐modified kaolin/rubber nanocomposites showed improved flex resistance, reduced heat build‐up, tan delta and loss modulus and higher chemical crosslink density index, indicating a reinforcing effect of the SRSO‐modified kaolin, enabling the nanocomposites to have potential industrial applications. © 2015 Society of Chemical Industry     

Response Surface Optimization of Dysprosium Extraction Using an Emulsion Liquid Membrane Integrated with Multi‐Walled Carbon Nanotubes

A new emulsion liquid membrane was prepared for dysprosium (Dy) extraction from aqueous solution using multi‐walled carbon nanotubes (MWCNTs). The influence of MWCNT concentration, carrier and surfactant concentration, stirring speed, feed‐phase pH, and internal phase concentration and their interactive effects were studied. A regression model for Dy extraction was developed and the parameters were optimized by response surface methodology. The extent of extraction increases with higher MWCNT concentration up to a certain level. The Dy extraction through the liquid membrane containing MWCNT improves with time. Moreover, the overall mass transfer coefficient was enhanced in the presence of MWCNT due to the formation of a more stable emulsion and liquid membrane.     

Synthesis and properties of polytriazoleimide containing anthracene,pyridine and 1, 2, 3‐triazole groups and their nanocomposites with titanium dioxide

A novel anthracene, pyridine and 1, 2, 3‐triazole containing diamine was synthesized by copper catalyst 1, 3‐dipolar cycloaddition of azides and alkynes groups (Click reaction). A series of polytriazoleimide (PTAI) nanocomposites were successfully prepared by condensation polymerization between the synthesized diamine monomer and commercially available pyromellitic dianhydride with different weight percentage of titanium dioxide (TiO₂). The structure of the monomer and polymer were confirmed by the fourier transform infrared and nuclear magnetic resonance spectroscopy. The synthesized PTAI is readily soluble in common polar solvents. The PTAIs naocomposites exhibited high thermal stability, the temperature corresponding to a 5% weight loss in the range of 495°C–555°C, excellent flame retardancy (char yield were found to be in the range of 48.1–66.4) and high glass transition temperature (T_g) at (267°C–294°C). Furthermore incorporation of TiO₂ into the PTAI matrix significantly improve the dielectric constant (2.70–4.75 at 1MHz) and dielectric loss (0.06–0.46 at 1 MHz). POLYM. ENG. SCI., 59:129–138, 2019. © 2018 Society of Plastics Engineers     

Processing of Mullite–Aluminum Composites

Interconnected-phase mullite–aluminum metal–ceramic composites were processed using the indirect fused-deposition process. In this process, controlled-porosity ceramic preforms were fabricated via the lost-mold process. The molds were designed with computer aided design (CAD) software and fabricated using a fused-deposition modeling (FDM) technique. Porous ceramic preforms were infiltrated with aluminum metal, via pressureless reactive metal infiltration, to form the mullite–aluminum composites. Both the macrostructures and the microstructures of the composites were controlled via CAD and FDM. During metal infiltration, the mullite phase transformed to α-alumina, and an alumina–aluminum composite formed. This paper describes the mullite-to-alumina phase transformation during reactive metal infiltration of the porous preforms, as a function of processing variables.     

One-pot dual product synthesis of hierarchical Co3O4@N-rGO for supercapacitors,N-GDs for label-free detection of metal ion and bio-imaging applications

Cobalt oxide nanoparticles@nitrogen-doped reduced graphene oxide (Co₃O₄@N-rGO) composite and nitrogen-doped graphene dots (N-GDs) were synthesized by a one-pot simple hydrothermal method. The average sizes of the synthesized bare cobalt oxide nanoparticles (Co₃O₄ NPs) and Co₃O₄ NPs in the Co₃O₄@N-rGO composite were around 22 and 24 nm, respectively with an interlayer distance of 0.21 nm, as calculated using the XRD patterns. The Co₃O₄@N-rGO electrode exhibits superior capacitive performance with a high capability of about 450 F g^?1 at a current density of 1 A g^?1 and has excellent cyclic stability, even after 1000 cycles of GCD at a current density of 4 A g^?1. The obtained N-GDs exhibited high sensitivity and selectivity towards Fe²⁺ and Fe³⁺, the limit of detection was as low as 1.1 and 1.0 μM, respectively, representing high sensitivity to Fe²⁺ and Fe³⁺. Besides, the N-GDs was applied for bio-imaging. We found that N-GDs were suitable candidates for differential staining applications in yeast cells with good cell permeability and localization with negligible cytotoxicity. Hence, N-GDs may find dual utility as probes for the detection of cellular pools of metal ions (Fe³⁺/Fe²⁺) and also for early detection of opportunistic yeast infections in biological samples.     

Positron lifetimes in pores of some low-silica zeolites: influence of water content, crystal size and structural type

Positron annihilation lifetime spectroscopy has been used for observation of the free voids in low silica zeolites, of LTA and FAU structure and different crystal size, before and after their heating at different temperatures below 200 °C. Sizes of crystals of the zeolite samples, as well as their structures and water contents, were characterized by X-ray diffraction, scanning electron microscopy, thermogravimetry, and particle size distribution measurements. The number of positron lifetime components as well as their values and intensities, after water removal from the zeolite structure, vary. However, changes are not uniform in all investigated zeolites. The differences are compared and discussed in the dependence of different structure types and crystal sizes of investigated zeolites.     

Application of Grid partitioning based Fuzzy inference system method as a novel approach for prediction of interfacial tension of hydrocarbon and carbon dioxide

Nowadays the importance of enhanced oil recovery (EOR) processes increases because of increasing demand of energy and declination of oil reservoirs. Due to this fact the researchers attracted to study performance of EOR methods. one of the high efficient methods is carbon dioxide injection which is favorable because of low cost and environmental friendly viewpoints. One of important parameters which have straight effect on recovery of injection is interfacial tension between carbon dioxide and hydrocarbons. In the present investigation the main objective is proposing the Grid partitioning based Fuzzy inference system method as novel approach to predict interfacial tension of carbon dioxide and hydrocarbon in terms of temperature, pressure, liquid and gas densities and molecular weight of alkane. The coefficients of determination for different datasets of training and testing of estimating algorithm are determined as 0.9919 and 0.9899. This results express the algorithm has potential of estimating interfacial tension of hydrocarbons and carbon dioxide.     

Effect of silica nanoparticles on the phase inversion of liquid-liquid dispersions

The effect of silica nanoparticles on phase inversion of liquid-liquid dispersions in a stirred vessel was investigated. The studied systems were toluene dispersed in water and vice versa. In the first set of experiments, phase inversion behavior of systems without Silica nanoparticles was evaluated and subsequent experiments were conducted in the presence of the nanoparticles. For this purpose, Silica nanoparticles of different concentrations (0.01, 0.03, 0.05, 0.07 wt%) were dispersed in water. The nanofluid stability was examined using an ultraviolet-visible (UV-vis) spectrophotometer. The results indicated that increase in silica nanoparticle concentrations up to 0.07 wt% led to increase in agitation speed of phase inversion 43–53.5% and 38.5–45% in the case of O/W and W/O dispersions, respectively. Consequently, the tendency of dispersions to inversion diminished as nanoparticle concentrations increased. Finally, 0.05 wt% of silica nanoparticle was selected as the optimum on the range studied.     

Synthesis,characterization and gas sensitivity of MoO<Subscript>3</Subscript> nanoparticles

Nanoparticles of molybdenum oxide were synthesized using the citrate sol-gel method and characterized using scanning electron microscopy and X-ray diffraction techniques. The sensitivity of the material to the presence of various gases was analysed and the particles showed higher sensitivity towards NO₂ gas.