Impact of nonuniform graded dopant profile in polysilicon gate on gate leakage current

In a MOSFET, a nonuniform, graded vertical dopant profile in the polysilicon gate causes a potential drop at the polysilicon/oxide interface. In this paper, the effect of this potential drop on the gate leakage current has been evaluated for the first time. The extent of variations of this affected gate leakage current with gate oxide thickness, gate length, and gate and drain bias conditions have been assessed with device simulation for an nMOS at 0.13 /spl mu/m low-voltage process. The results provide a guideline to the severity of this effect from the point of view of device and circuit operation and standby power consumption.     

Time-domain measurements with the Hewlett-Packard network analyzerHP 8510 using the matrix pencil method

The generalized pencil of function (GPOF) method, also known as the matrix pencil method, is used to improve the resolution of HP 8510B network analyzer data in the time domain. This method provides for much higher resolution than the Fourier techniques. A comparison of the two methods is given for the example of the Beatty standard. The examples show that a parametric technique such as the GPOF can provide accurate and reliable results with a high degree of resolution even when the fast Fourier transform (FFT)-based technique fails     

Sexualities, technologies, and the teaching of writing: A critical overview

In this introduction to a special issue of Computers and Composition, the authors critically review current literature on computer-assisted writing pedagogies that grapple with issues of sexuality. Although this body of work is small, it points to provocative ways to develop our students’ critical and rhetorical sensibilities about the constructions of sexuality in our culture. Further, such work innovatively addresses the place of networked communication technologies in the interrogation of such constructions. The authors conclude with both an introduction of the work in this special issue that addresses the intersection of sexuality studies and computer-assisted writing studies and with a call for additional work in this field.     

A double-layer current conduction model for high-κ gate dielectric materials with interfacial oxide or silicate layer

The current-voltage (I-V) characteristics of metal-oxide-semiconductor (MOS) structures with hafnium oxide as the gate dielectric film were studied. Sharp shifts from a low-voltage ohmic regime to a tunneling conduction were observed in the high-voltage range. The paper demonstrates that this behavior can be described very well with a double-layer dielectric model. Excellent fittings of the experimental curves were obtained and the related key structural and physical parameters were obtained. The model fitting further suggests the optimal annealing conditions for preparing the hafnium oxide films.     

A parametric interpolator with confined chord errors, acceleration and deceleration for NC machining

Parametric interpolation has many advantages over linear interpolation in machining curves. Real time parametric interpolation research so far has addressed achieving a uniform feed rate, confined chord errors and jerk limited trajectory planning. However, simultaneous consideration of confined chord errors that respect the acceleration and deceleration capabilities of the machine has not been attempted. In this paper, the offline detection of feed rate sensitive corners is proposed. The velocity profile in these zones is planned so that chord errors are satisfied while simultaneously accommodating the machine's acceleration and deceleration limits. Outside the zone of the feed rate sensitive corners, the feed rate is planned using the Taylor approximation. Simulation results indicate that the offline detection of feed rate sensitive corners improves parametric interpolation. For real time interpolation, the parametric curve information can be augmented with the detected feed rate sensitive corners that are stored in 2×2 matrices.     

A quantitative analysis of the effectiveness of laparascopy and endoscopy virtual reality simulators

The increasing use of virtual reality (VR) simulators in surgical training makes it imperative that definitive studies be performed to assess their training effectiveness. Indeed in this paper we report the meta-analysis of the efficacy of virtual reality simulators in (1) the transference of skills from the simulator training environment to the operating room and (2) their ability to discriminate between the experience levels of its users. The task completion time and the error score were the two study outcomes collated and analyzed in this meta-analysis. Sixteen studies were identified from a computer-based literature search (1996-2004). The meta-analysis of the random-effects model (because of the heterogeneity of the data) revealed that training on virtual reality simulators did lessen the time taken to complete a given surgical task as also clearly differentiate between the experienced and the novice trainees. Meta-analytic studies such as the one reported here would be very helpful in the planning and setting up of surgical training programs and for the establishment of reference ‘learning curves’ for a specific simulator and surgical task. If any such programs already exist they can then indicate the improvements to be made in the simulator used such as providing for more variety in their case scenarios based on the state and/or rate of learning of the trainee.     

Determination of optimal feedback terminal controllers for general boundary conditions using generating functions

Given a nonlinear system and a performance index to be minimized, we present a general approach to expressing the finite time optimal feedback control law applicable to different types of boundary conditions. Starting from the necessary conditions for optimality represented by a Hamiltonian system, we solve the Hamilton-Jacobi equation for a generating function for a specific canonical transformation. This enables us to obtain the optimal feedback control for fundamentally different sets of boundary conditions only using a series of algebraic manipulations and partial differentiations. Furthermore, the proposed approach reveals an insight that the optimal cost functions for a given dynamical system can be decomposed into a single generating function that is only a function of the dynamics plus a term representing the boundary conditions. This result is formalized as a theorem. The whole procedure provides an advantage over methods rooted in dynamic programming, which require one to solve the Hamilton-Jacobi-Bellman equation repetitively for each type of boundary condition. The cost of this favorable versatility is doubling the dimension of the partial differential equation to be solved.