The use of life cycle tools to support decision making for sustainable nanotechnologies

Nanotechnology is a broad-impact technology with applications ranging from materials and electronics to analytical methods and metrology. The many benefits that can be realized through the utilization of nanotechnology are intended to lead to an improved quality of life. However, numerous concerns have been expressed regarding the unchecked growth of nanotechnology and the unforeseen consequences it may bring. To address the concerns, nanotechnology must be examined under the microscope of sustainability. This work applies the life cycle perspective to provide an understanding of the challenges facing the development of sustainable nanotechnology. A discussion of the holistic tools used to assess the components of sustainability serves as the basis to examine how a harmony between policy and product development can be maintained using decision making for sustainability. This harmony will be most readily achieved using an enhanced risk management strategy for sustainability that combines sustainability assessment with sustainable chemical design.     

Investigation of the effect of ZnO nanoparticles on the thermomechanical and microbial properties of hyperbranched polyurethane‐urea hybrid composites

Hybrid coatings of hyperbranched polyurethane‐urea (HBPUU) containing ZnO nanoparticles were prepared by mixing the hyperbranched polyurethane with the nanoparticles. The films were stored at room temperature and laboratory humidity conditions for one week to yield completely cured hybrid films. The ZnO nanoparticles were found to be well dispersed in the polymer up to 3 wt%. The structure–property relationship of various HBPUU–ZnO hybrid coatings was analysed using a Fourier transform infrared peak deconvolution technique with a Gaussian curve‐fitting procedure, while their viscoelastic, thermomechanical and surface morphology were studied using X‐ray diffraction, dynamic mechanical thermal analysis, thermogravimetric analysis, a universal testing machine, scanning electron microscopy, atomic force microscopy and contact angle instruments. The thermal stability and mechanical properties of the hybrid composite films improved with increasing ZnO content, which was believed to be due to thermal insulation in the presence of nanoparticles. Water contact angle data suggested that the hydrophobic character of the hybrid composites increased with increasing nanoparticle concentration. The antimicrobial property of the HBPUU–ZnO hybrid coatings was studied using the disc diffusion method. HBPUU–ZnO hybrid coatings showed good antimicrobial properties compared to HBPUU. Copyright © 2012 Society of Chemical Industry     

Investigation of a single pit/defect evolution during the corrosion process

The investigation of a single pit/defect evolution due to localized corrosion that is commonly observed in a wide range of aluminum alloys is reported. Electrochemical experiments, microscopy and computations were used to predict stresses around a single pit/defect. It was observed that the pit/defect profile changing its shape from slightly conical to more hemispherical shape with increasing corrosion time. Also, stress distribution and levels vary non-linearly around a single pit/defect. The results also indicate that the evolution of these pits/defects may lead to nucleation of a crack over time, which can be predicted from these stresses.     

An index to characterize gas-solid and solid-solid mixing from average volume fraction fields

A mixing index based on solid volume fraction fields is developed for gas-solid flows. Conventional mixing indices are based on particle realizations of granular mixing and are applicable to experimental data or discrete element method simulations. However, these indices cannot be used as-is for multifluid models, and an index for characterizing mixing in gas-solid flows from continuous fields is needed. The performance of the new mixing index is tested in two applications. The first is a 3D simulation of the mixing of biomass and sand in a fluidized bed reactor, and the second is a 2D simulation of binary particle segregation in a fluidized bed. The simulations are performed using OpenFOAM®. The mixing index is used to quantify gas-solid mixing using solid volume fractions and solid-solid mixing using solid fractions. The formulation of conventional mixing indices is extended to be used with solid volume fractions fields, and methods for performance improvement are presented.     

A novel strategy for fabricating zirconia implants with a trabecular biomimetic porous surface

For successful osseointegration of load-bearing implants, an improved bone–implant contact area through a trabecular porous surface resulting in minimized stress shielding effect is highly desirable. We propose a novel strategy of green net shaping a ceramic dough, combined with a reticular foam replica method and gradient coating, to fabricate biomimetic porosity in a customizable ceramic dental implant for the first time. About 85 vol% porosity and 300–600-μm pore size were evident in microCT and electron microscopy of the sintered samples, suitable for bone ingrowth. Excellent integrity at the interface along with homogeneous distribution of secondary alumina phase in zirconia matrix was achieved, despite the difference in the green state powder loading between the dough and the slurry.     

Development of spark plasma sintered conductive SiC–TiB2 composites for electrical discharge machining applications

Highly dense electrically conductive silicon carbide (SiC)–(0, 10, 20, and 30 vol%) titanium boride (TiB₂) composites with 10 vol% of Y₂O₃–AlN additives were fabricated at a relatively low temperature of 1800°C by spark plasma sintering in nitrogen atmosphere. Phase analysis of sintered composites reveals suppressed β→α phase transformation due to low sintering temperature, nitride additives, and nitrogen sintering atmosphere. With increase in TiB₂ content, hardness increased from 20.6 to 23.7 GPa and fracture toughness increased from 3.6 to 5.5 MPa m^1/2. The electrical conductivity increased to a remarkable 2.72 × 10³ (Ω cm)^–1 for SiC–30 vol% TiB₂ composites due to large amount of conductive reinforcement, additive composition, and sintering in nitrogen atmosphere. The successful electrical discharge machining illustrates potential of the sintered SiC–TiB₂ composites toward extending the application regime of conventional SiC-based ceramics.     

Erosion behavior of SiC–WC composites

Dense silicon carbide (SiC) ceramics were prepared with 0, 10, 30 or 50 wt% WC particles by hot pressing powder mixtures of SiC, WC and oxide additives at 1800 °C for 1 h under a pressure of 40 MPa in an Ar atmosphere. Effects of alumina or SiC erodent particles and the WC content on the erosion performance of sintered SiC–WC composites were assessed. Microstructures of the sintered composites consisted of WC particles distributed in the equi-axed grain structure of SiC. Fracture surfaces showed a mixed mode of fracture, with a large extent of transgranular fracture observed in SiC ceramics prepared with 30 wt% WC. Crack bridging by WC enhanced toughening of the SiC ceramics. A maximum fracture toughness of 6.7 MPa*m^1/2 was observed for the SiC ceramics with 50 wt% WC, whereas a high hardness of 26 GPa was obtained for the SiC ceramics with 30 wt% WC. When eroded at normal incidence, two orders of magnitude less erosion occurred when SiC–WC composites were eroded by alumina particles than that eroded by SiC particles. The erosion rate of the composites increased with increasing angle of SiC particle impingement from 30° to 90°, and decreased with WC reinforcement up to 30 wt%. A minimum erosion wear rate of 6.6 mm³/kg was obtained for SiC–30 wt% WC composites. Effects of mechanical properties and microstructure on erosion of the sintered SiC–WC composites are discussed, and the dominant wear mechanisms are also elucidated.     

Evolution of particle metrics in a buoyant aerosol cloud from explosive releases

Abstract

The detonation of high explosive (HE) material generates a cloud containing a high concentration of detonation products in the form of aerosol particles and gases. Modeling and simulation of aerosol metrics in an explosive cloud is a complex problem as it involves various processes such as chemical reaction, nucleation, volume expansion, and coagulation. Several models have been developed to study the atmospheric dispersion of these detonation products, but very few or no model is available to study the evolution of aerosol metrics at the early stage. In this work, we present a numerical model to simulate the temporal evolution of aerosol metrics in an expanding cloud by coupling transient thermodynamic properties with important microphysical processes. To illustrate the application, the numerical model is applied to a typical HE, and the aerosol particle properties such as size distribution, number concentration, and average size are estimated from the numerical results. These results will provide the essential input conditions for atmospheric dispersion models to estimate the atmospheric concentration and deposition of aerosol particles.

Copyright © 2020 American Association for Aerosol Research     

Viscosity of Iron Oxide Aluminosilicate Melts

Metallurgical and Materials Transactions B - A structure-based viscosity model has been developed for the CaO-MgO-FeO-SiO2-Al2O3 system and its subsystems. A critical analysis of the experimental...     

Mechanical,morphological, and thermogravimetric analysis of alkali-treated Cordia-Dichotoma natural fiber composites

ABSTRACT

Usage of composites with natural fiber reinforcement is drastically increasing in recent times because of their low density, biodegradable nature, and low cost. However, natural fibers have certain core problems such as poor adhesion between the fiber and matrix and a relatively high degree of moisture absorption. Alkaline treatment of natural fibers is aimed at improving the adhesive strength so that effective stress transferability takes place in the composite. In the present work, Cordia-Dichotoma fibers were treated with sodium hydroxide (NaOH) and composites were prepared with different weight ratios of these fibers reinforced with epoxy. The prepared composites were tested for their tensile and flexural strengths (mechanical properties). Besides, for a comprehensive material characterization, IR spectroscopy (FT-IR), scanning electron microscope, and thermogravimetric analysis were carried out. This work investigates the influence of aforementioned NaOH treatment on thermal, mechanical, and morphological properties of the composite material.