Evaluation of a workplace technology for mental health assessment: A meaning-making process

This paper describes the results of a summative evaluation conducted to explore the usability and acceptability of an automated telephone-based technology, designed and developed as a screening tool for mental health disorders in the workplace. The system screens employees for symptoms and subsequently provides educational information and referrals to improve mental health and enhance productivity. The qualitative evaluation was a sub-study of a larger randomized controlled trial (RCT). We conducted in-depth interviews with 15 individuals who participated in the RCT and had used the system. A phenomenological theoretical framework was utilized to analyze the narrative data. Results indicated that participants had mostly positive experience with the system and perceived it as a confidential program that allowed them to reflect on their symptoms without inhibition, fear of judgment or embarrassment. We also learned that asking mere questions about mental health symptoms can be a positive, instructive and possibly a restorative experience. There is a likelihood that for many participants, exposure to questions about their emotional and mental distress validated their feelings about their symptoms and was sufficiently compelling to promote help-seeking behavior. This evaluation study demonstrates that computers can be utilized in the workplace as effective screening and educational tools to improve employees’ mental health.     

Multi-scale modeling in damage mechanics of composite materials

This paper addresses the multi-scale modeling aspects of damage in composite materials. The multiplicity of the scales of the operating mechanisms is discussed and clarified by taking examples of damage in a unidirectional ceramic matrix composite and in a cross ply polymer matrix composite laminate. Two multi-scale modeling strategies––the hierarchical and the synergistic––are reviewed in the context of deformational response. Finally, the “big picture” as it relates to the cost-effective manufacturing of composite structures intended for long-term performance is outlined and desired future direction in multi-scale modeling is discussed.     

Multidroplet Impact Model for Prediction of Residual Stresses in Water Jet Peening of Materials

In this article, a multidroplet impact model, proposed for predicting residual stresses induced on materials subjected to water jet peening, is presented. This approach considers the impact pressure distribution due to high-velocity droplets impinging on the material surface instead of stationary pressure distribution for prediction of residual stresses on water jet-peened surfaces. It makes use of Reichardt's theory for predicting the velocity distribution of droplets and liquid impact theory for predicting the impact pressure and duration of impact of high-velocity droplets. For predicting residual stresses on the surface and subsurface of material subjected to water jet peening, finite element modeling approach was adopted by using transient elastoplastic finite element analysis by considering an impingement of a set of droplets in succession to one another over a certain time period after which this pressure is released. The effectiveness of the proposed approach was demonstrated bv comparing the predicted residual stresses with those predicted by using the single set of droplets approach proposed by Rajesh et al. [6]. Finally, the practical relevance of the proposed approach was shown by comparing the predicted results with the experimental results obtained by water peening of 6063-T6 aluminium alloy.     

Investigating Role of Growing Adsorbent Bed in a Dead-End PAC/UF Process

A two-stage mathematical model was developed to describe adsorbate removal in a dead-end powdered activated carbon/ultrafiltration (PAC/UF) membrane process. Para-nitrophenol (PNP) was used as the model organic compound. The first stage accounted for adsorbate removal during transport from the initial PAC contact with the PNP solution to the membrane system, and the second stage accounted for additional PNP removal due to the retention of the PAC in a growing bed on the membrane surface. The PAC adsorptive capacity was described using the Langmuir isotherm, whose parameters were estimated from isotherm experiments. Transport of the PNP through the PAC particle was described using the homogeneous surface diffusion model and the surface diffusivity was estimated from batch experiments. The two stage model predicted the effluent concentrations from the PAC/UF process during the early stages of the experiments, but model improvements are required to more accurately predict the latter stages. A batch model can be used to describe the effluent PNP concentration from the PAC/UF process if dispersion is neglected.     

Stimulating Biological Nitrification via Electrolytic Oxygenation

The feasibility of electric current prompted aerobic biodegradation of NH4+–N in an attached growth bioreactor system is demonstrated. Nitrification was induced at electric current densities of 1.25 and 2.5?mA/cm2 and with pure oxygen supplied at a rate equivalent to 1.25?mA/cm2 when the bioreactor was operated in batch mode at 6 days detention time. About 84% (27?mg/L)?NH4+–N loss was observed at the end of each detention period during all three experimental conditions, indicating that the electric current did not negatively impact the rate of nitrification. Nitrite accumulation was observed during the initial stages of nitrification experiments with 1.25?mA/cm2 current intensity, but nitrite did not accumulate during the other two sets of nitrification experiments. A mathematical model formulated to obtain the rates of biological reactions showed that rates of NH4+–N removal are similar for all aeration conditions. Abiotic experiments showed that NH4+–N was not removed electrolytically and via stripping, confirming that NH4+–N disappearance is due to biological activity.     

A simple method for the evaluation of fracture toughness of a multi-layered laminate based on the failure stress of sub-laminates

A simple analytical method is presented that can be used to predict the intralaminar fracture toughness of multilayered composite laminate based on the failure stresses of its sub laminates. MCCI approach is followed to verify the fracture toughness of a base laminate and the method is validated comparing the available test data on the toughness value of the base laminate with the prediction. It is observed that a better representation of carbon —epoxy base laminate by its sub laminate gives very good agreement in prediction within 3%.     

A flexible and recoverable client/server database event notification system

A software architecture is presented that allows client application programs to interact with a DBMS server in a flexible and powerful way, using either direct, volatile messages, or messages sent via recoverable queues. Normal requests from clients to the server and replies from the server to clients can be transmitted using direct or recoverable messages. In addition, an application event notification mechanism is provided, whereby client applications running anywhere on the network can register for events, and when those events are raised, the clients are notified. A novel parameter passing mechanism allows a set of tuples to be included in an event notification. The event mechanism is particularly useful in an active DBMS, where events can be raised by triggers to signal running application programs. Received July 21, 1995 / Accepted May 30, 1996     

Hot Corrosion Behaviour of HVOF Sprayed Stellite-6 Coatings on Gas Turbine Alloys

The coal burned natural gas in contact with gas turbine can contain impurities of sodium, sulfur, vanadium, silicon and possibly lead and phosphorous, induce accelerated hot corrosion during long term operation. Coatings are frequently applied on gas turbine components in order to restrict surface degradation and to obtain accurate lifetime expectancies. High velocity oxy-fuel thermal spraying has been used to deposit Stellite-6 alloy coatings on turbine alloys. Hot corrosion behavior of the coatings were investigated for 50 cycles of 1 h heating at 800 °C followed by 20 min cooling in presence of Na₂SO₄ + 50 % V₂O₅ measuring weight gain (or loss). X-ray diffraction and SEM/EDAX techniques were used to characterize the oxide scale formed. The superior performance of Stellite-6 coating can be attributed to continuous and protective thin oxide scale of CoO, Cr₂O₃ and SiO₂ formed on the surface. The coating region beneath this thin oxide scale was partially oxidized. Uncoated SuperCo-605 and MDN-121 showed less weight gain than Stellite-6 coated samples, but they showed spalling or sputtering during cyclic oxidation. Stellite-6 coating was dense and pore free even after 50 cycles, indicating that it can resist the hot corrosion cycle.     

Investigation on microstructure and tensile behaviour of stir cast LM13 aluminium alloy reinforced with copper coated short steel fibers using response surface methodology

Copper coated steel fibers reinforced LM13 aluminium alloy composites have been prepared using stir casting process. Experiments have been designed using response surface methodology by varying wt% of reinforcement (0–10), stirrer speed (350–800 rpm) and pouring temperature (700–800 °C). Microstructure, tensile strength and fracture surface of composites have been investigated. Analysis of variance, significance test and confirmation tests have been performed and regressions models have been developed to predict the tensile strength of composites. Response surface plots reveal that tensile strength of composites increases with increasing wt% of copper coated steel fibers reinforcement up to 6 wt%. Further increase in wt% of steel fibers decreases the tensile strength of composites. However tensile strength of composites increases with increasing stirrer speed due to the uniform and homogeneous dispersion of steel fibers in matrix. Optimum stir cast process parameters for obtaining higher tensile strength are found to be 5.9 wt% of reinforcement, 753 °C pouring temperature and stirrer speed of 633 rpm. Fracture mechanism is dominated by steel fiber pullouts in composites with higher wt% of reinforcement and dimples are observed in the surface of composites containing lower levels of wt% of reinforcement.