PressBase : a presentation synchronization database for distributed multimedia systems

Multimedia presentations are the basic objects of multimedia databases. Since a multimedia presentation is not an instant display of a query result, the control knowledge (or synchronization requirements) has to be incorporated into the database and necessary precautions have to be taken for a lengthy presentation. Active databases provide a mechanism for incorporation of control knowledge by using event-condition-action (ECA) rules. In this paper, we describe how multimedia synchronization can be handled within a database using ECA rules. We present a prototype presentation synchronization database, named as PressBase, for distributed multimedia systems. We have adopted one of the synchronization models, SynchRuler, and then incorporated into a relational database system.     

PLUS: a probe-loss utilization streaming mechanism for distributed multimedia presentation systems

We present a new flow and congestion control scheme, PLUS (Probe-Loss Utilization Streaming protocol), for distributed multimedia presentation systems. This scheme utilizes probing of the network situation and an effective adjustment mechanism to data loss to support multimedia presentations. The proposed scheme is also designed to scale with increasing number of PLUS-based streaming traffic and to live in harmony with TCP-based traffic. The novelty of the PLUS protocol is that it utilizes the knowledge of its future bottleneck bandwidth in probing the current network situation. This can be achieved by a priori knowledge of the multimedia data before a presentation is requested by a client. Compression schemes like MPEG introduce dependencies on media units. I frames are needed to successfully decode P and B frames, and P frames are needed to decode B frames. A loss of an I or P frame automatically eliminates dependent media units. Our probing scheme increases the successful transmission of critical I and P packets without the overhead of error-correction-schemes. Probing is done using B-frame packets. The advantage is that we use data packets as probe packets. With the PLUS protocol we address the need to avoid congestion rather than react to it. Experiments demonstrate the effectiveness of the approach in utilizing network resources and decreasing loss ratios.     

Designing of a powder compressing device with vibration and investigation of compressibility of MgO powders with this device

One of metal matrix composite (MMC) production methods is infiltration of liquid metal into preformed reinforcement. In this method, MMCs are produced by infiltration of liquid metal into preformed reinforcement using one of pressure, vacuum or pressureless (free) infiltration methods. For infiltration purposes, reinforcement materials in different figuration are preformed in desired shape and reinforcement volume ratio. In this study a vibration apparatus has been designed to compress the particulate reinforcement in a tube so that pressure or vacuum infiltration can be carried out. The compressibility of MgO powders with different sizes with this apparatus has also been investigated. It has been found that with this apparatus, it is possible to compress desired number of specimens uniformly at the same time and at the same ratio. It has also been determined that MgO powders can be compressed in different ratio due to particle sizes with this device. Compressing time of 3 min is enough to reach maximum compression ratio in MgO powders.     

A Novel Control Unit for a Friction Welding Machine Based on Computer

Typical friction welds are made by holding a non-rotating sample in contact with a rotating sample under constant or gradually increasing pressure until the interface reaches the welding temperature and then stopping pressure rotating to complete the weld. This process requires additional time and is labor intensive. Recently, several control systems have been introduced to the industry for improving the welding process such as conventional automatic control, microcontroller control, and Programmable Logic Controller (PLC). However, these processes have limitations either on materials selection or on visualization. In this study, continuous monitoring, control and recording are implemented. Computer-controlled platform for the simulation and control of mechanisms is based on a Microsoft Visual Basic environment. Welding parameters such as friction time, forge time and breaking time are entered with a keyboard and can be saved and used again. To show the feasibility and versatility of the study, the evaluation is used for sample joining. It has been observed that this system works successfully and gives good performance.     

Failure Analysis of Two-Dimensional Carbon-Epoxy Composite Plate Pinned Joint

The aim of this study is to investigate failure strength and failure mode of a mechanically fastened carbon-epoxy composite plate of arbitrary orientation. The failure load and the failure mode are analyzed numerically and experimentally. The numerical method includes two steps. First, the stress distribution in the plate is calculated by the use of finite-element method. Second, the failure load and the failure mode are predicted by means of Tsai-Hill and fiber tensile-compressive failure criteria. A computer program was developed which can be used to calculate the failure load, the failure mode, and the propagation of failure. The distance-to-diameter, E/D , and width-to-diameter, W/D , ratios in the plate are changed from 1 to 5 and 2 to 5, respectively. It is found that full bearing strength is developed when E/D and W/D ratios are equal to or greater than 4.     

New organic semiconductor materials: electrical conductivity,thermal properties and application of voltage‐controlled negative resistance device of poly[(2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid)‐co‐(maleic acid)]

BACKGROUND: Electrical conductivity, photoconductivity, voltage‐controlled negative resistance and thermal properties of copolymers of 2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid and maleic acid were investigated in order to obtain new organic semiconductors. RESULTS: The room temperature conductivity of three different copolymers was found to be in the range 1.28 × 10^?8 ? 1.20 × 10^?7 S cm^?1. The dark‐ and photo‐current‐voltage characteristics indicate that the copolymers exhibit voltage‐controlled differential negative resistance behaviour. The electrical conductivity of the polymers increases by photo‐illumination, suggesting that the polymers exhibit photoconductivity. The width of the exponential tail in the forbidden band gap of the three polymers was determined via the transient photocurrent technique and E₀ values were in the range 34.4–36.49 meV. CONCLUSION: The results suggest that the copolymers could be used as organic semiconductor materials. Copyright © 2007 Society of Chemical Industry     

Effects of the aluminum filler content on moisture diffusion into epoxy adhesives in distilled water and sea water

Epoxies are the most common of high‐performance structural adhesives, especially in automotive and aircraft manufacturing. In a variety of industrial applications, epoxy adhesives are required to have enhanced thermal conductivity. The normal method of changing this property is to add to the epoxy a filler of higher conductivity than the continuous phase. Although the improvement in the thermal properties of adhesives by the addition of metal fillers is obvious, their influence on water sorption characteristics of adhesives is not clear. It was the objective of this study to shed light on these aspects, which are lacking in the literature. The emphasis was placed on determining the moisture sorption behavior of aluminum‐powder‐filled epoxy adhesives under complete immersion in distilled water and sea water. Moisture diffusion tests show that the addition of aluminum filler into epoxy decreases the total amount of water intake at saturation in both fluids. However, there appears to be no significant effect of the aluminum filler content on the moisture diffusivity in epoxy adhesive specimens in either distilled water or seawater. It has also been determined that the adhesives adsorb a larger amount of water upon exposure to distilled water than when exposed to seawater, whereas the moisture diffusion rate in the adhesive immersed in seawater is higher than that in distilled water. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1165–1171, 2005     

Surface Characterization of Mild Steel During Atmospheric Corrosion After Being Treated by Sodium Dihydrogen Orthophosphate

Protection of Metals and Physical Chemistry of Surfaces - The objective of this study was to characterize the surfaces of the steel products produced locally during their exposure to the industrial...     

A novel indicator system for catalytic spectrophotometric determination and speciation of inorganic selenium species （Se（Ⅳ）, Se（Ⅵ）） at trace levels in natural lake and river water samples

A novel catalytic kinetic method is proposed for the determination of Se(IV), Se(VI), and total inorganic selenium in water based on the catalytic effect of Se(IV) on the reduction of Celestine blue by sodium sulfide at pH 7.0 phosphate buffer. The fixed-time method was adopted for the determination and speciation of inorganic selenium. Under the optimum conditions, the two calibration graphs are linear with a good correlation coefficient in the range 2–20 and 20–200 μg·L⁻¹ of Se(IV) for the fixed-time method at 30°C. The experimental and theoretical detection limits of the developed kinetic method were found to be 0.21 and 2.50 μg·L⁻¹ for the fixed-time method (3 min). All of the variables that affect the sensitivity at 645 nm were investigated, and the optimum conditions were established. The interference effect of various cations and anions on the Se(IV) determination was also studied. The selectivity of the selenium determination was greatly improved with the use of the strongly cation exchange resin such as Amberlite IR120 plus as long as chelating agents of thiourea and thiosulphate. The proposed kinetic method was validated statistically and through recovery studies in natural water samples. The relative standard deviations (RSDs) for ten replicate measurements of 2, 10, and 20 μg·L⁻¹ of Se(IV) change between 0.35% and 5.58%, while the RSDs for ten replicate measurements of 3, 6, and 12 μg·L⁻¹ of Se(VI) change between 0.49% and 1.61%. Analyses of a certified standard reference material (NIST SRM 1643e) for selenium using the fixed-time method showed that the proposed kinetic method has good accuracy. The Se(IV), Se(VI), and total inorganic selenium in lake and river water samples have been successfully determined by this method after selective reduction of Se(VI) to Se(IV).