Joint scheduling and power control supporting multicasting in wireless ad hoc networks

This paper addresses the problem of power control in a multihop wireless network supporting multicast traffic. We face the problem of forwarding packet traffic to multicast group members while meeting constraints on the signal-to-interference-plus-noise ratio (SINR) at the intended receivers. First, we present a distributed algorithm which, given the set of multicast senders and their corresponding receivers, provides an optimal solution when it exists, which minimizes the total transmit power. When no optimal solution can be found for the given set of multicast senders and receivers, we introduce a distributed, joint scheduling and power control algorithm which eliminates the weak connections and tries to maximize the number of successful multicast transmissions. The algorithm allows the other senders to solve the power control problem and minimize the total transmit power. We show that our distributed algorithm converges to the optimal solution when it exists, and performs close to centralized, heuristic algorithms that have been proposed to address the joint scheduling and power control problem.     

An Adaptive Transmission Mode Selection Scheme for Cellular Underlaid D2D Communication

In this paper, we propose to use Artificial Bee Colony (ABC) optimization to solve the joint mode selection, channel assignment, and power allocation (JMSCPA) problem to maximize system throughput and spectral efficiency. JMSCPA is a problem where the allocation of channel and power depends on the mode selection. Such problems require two step solution and are called bi-level optimization problems. As bi-level optimization increases the complexity and computational time, we propose a modified version of single-level ABC algorithm aided with the adaptive transmission mode selection algorithm to allocate the cellular, reuse, and dedicated modes to the DUs along with channel and power allocation based on the network traffic load scenarios. A single variable, represented by the users (CUs and DUs) is used to allocate mode selection, and channel allocation to solve the JMSCPA problem, leading to a simpler solution with faster convergence, and significant reduction in the computational complexity which scales linearly with the number of users. Further, the proposed solution avoids premature stagnation of conventional ABC into local minima by incorporating a modification in its update procedure. The efficacy of the ABC-aided approach, as compared to the results reported in the literature, is validated by extensive numerical investigations under different simulation scenarios.

     

Thermoelectric Properties of Two-Phase PbTe with Indium Inclusions

The thermoelectric figure of merit (zT) can be increased by introduction of additional interfaces in the bulk to reduce the thermal conductivity. In this work, PbTe with a dispersed indium (In) phase was synthesized by a matrix encapsulation technique for different In concentrations. x-Ray diffraction analysis showed single-phase PbTe with In secondary phase. Rietveld analysis did not show In substitution at either the Pb or Te site, and this was further confirmed by room-temperature Raman data. Low-magnification (~1500×) scanning electron microscopy images showed micrometer-sized In dispersed throughout the PbTe matrix, while at high magnification (150,000×) an agglomeration of PbTe particles in the hot-pressed samples could be seen. The electrical resistivity (ρ) and Seebeck coefficient (S) were measured from 300 K to 723 K. Negative Seebeck values showed all the samples to be n-type. A systematic increase in resistivity and higher Seebeck coefficient values with increasing In content indicated the role of PbTe-In interfaces in the scattering of electrons. This was further confirmed by the thermal conductivity (κ), measured from 423 K to 723 K, where a greater reduction in the electronic as compared with the lattice contribution was found for In-added samples. It was found that, despite the high lattice mismatch at the PbTe-In interface, phonons were not scattered as effectively as electrons. The highest zT obtained was 0.78 at 723 K for the sample with the lowest In content.     

Performance Analysis of UWB Channels for Wireless Personal Area Networks

Ultra-wide band (UWB) communication is one of the most promising technology for high data rate networks over short-range communication. The ultra-wide bandwidth offers pulses with very short duration that provides frequency diversity and multipath resolution. Ultra-wide band (UWB) channels raise new effects in the receiver, the amplitude fading statistics being different compared to the conventional narrow band wireless channels. This review paper focuses on modeling of ultra-wide band channels, especially for simulation of personal area networks and also discusses the benefits, application potential and technical challenges in wideband communication. The concept of Orthogonal Frequency Division Multiplexing (OFDM) has recently been applied in wireless communication systems due to its high data rate transmission capability with high bandwidth efficiency and its robustness to multi-path delay. UWB OFDM communication was proposed for physical layer in the IEEE 802.15.3a standard which covers wideband communication in wireless personal area networks. Since the channel model for multicarrier UWB communication is different from that of plain ultra-wide band channel, a novel modification method in UWB channel model is proposed with specific center frequency and multipath resolution. Moreover, dynamic channel estimation is necessary before demodulation of UWB OFDM signals since the radio channel is time varying and frequency selective for wideband systems. The performance of the proposed method is statistically analyzed using LS and MMSE based channel estimation methods.     

A cascade energy band structure enhances the carrier energy in organic vertical-type triodes

Organic vertical-type triodes (OVTs) based on the cascade energy band structure as emitter layer are studied. The electric characteristics were dramatically enhanced while incorporating the cascade energy under current driving and voltage driving modes. The improvement is attributed to that injection carriers can obtain higher energy through a stepwise energy level. When the device has a layered structure of F₁₆CuPC (10 nm)/PTCDI (10 nm)/pentacene (100 nm) in emitter, it exhibits a common-base transport factor of 0.99 and a common-emitter current gain of 225 under current driving mode and exhibits a high current modulation-exceeding ?520 μA for a low collector voltage of ?5 V and a base voltage of ?5 V and the current on/off ratio of 10³ under voltage driving mode. Furthermore, we realized first organic current mirror that exhibited out/in current ratio of 0.75 and output resistance of 10⁵ Ω by using the OVTs.     

Bandwidth Improvement of Stub Loaded Compact Ultra-Wideband Microstrip Patch Antenna for C/X-Band Applications

Wireless Personal Communications - Authentication is a term very important for data communication security. We see many frauds due to authentication failure. The problem manifolds when...     

Robustness comparison of DG FinFETs with symmetric, asymmetric, tied and independent gate options with circuit co-design for ultra low power subthreshold logic

Double gate FinFETs are shown to be better candidates for subthreshold logic design than equivalent bulk devices. However it is not so clear which configuration of DG FinFETs will be more optimal for subthreshold logic. In this paper, we compare the different device and circuit level performance metrics of DG FinFETs with symmetric, asymmetric, tied and independent gate options for subthreshold logic. We observe that energy delay product (EDP) shows a better subthreshold performance metric than power delay product (PDP) and it is observed that the tied gate symmetric option has ≈78% lower EDP value than that of independent gate option for subthreshold logic. The asymmetry in back gate oxide thickness adds to further reduction in EDP for tied gate and has no significant effect on independent gate option. The robustness (measured in terms of % variation in device/circuit performance metrics for a ±10% variation in design parameters) of DG FinFETs with various options has also been investigated in presence of different design parameter variations such as silicon body thickness, channel length, threshold voltage, supply voltage and temperature, etc. Independent gate option has been seen to be more robust (≈40% less) than that of tied gate option for subthreshold logic. Comparison of logic families for subthreshold regime with DG FinFET options shows that for tied gate option, sub-CMOS, sub-Domino and sub-DCVSL have almost similar and better energy consumption and robustness characteristics with respect to PVT variations than other families.     

A delay and energy aware coordination mechanism for WSAN

In this paper, a delay and energy aware coordination mechanism (DEACM) has been devised for wireless sensor–actor networks. In DEACM, a two‐level hierarchical K‐hop clustering mechanism is used to organize the sensors and actors for communication. In the first level, sensors form a K‐hop cluster using actors as cluster heads, and sink is made as the cluster head in the second level to form a cluster among actors. Sensor nodes, which are 1‐hop away from the actors, also called as relay nodes are elected as backup cluster head (BCH) based on the residual energy and node degree. BCH collects the data from sensors when an actor is away to perform actions in the affected area. The scheme is evaluated through exhaustive simulation in NS2 along with other existing schemes. Different parameters like average event waiting time, event reliability, and average energy dissipation are compared, varying the number of sensors, actors, and data transfer rate. In general, it is observed that the proposed DEACM outperforms other existing schemes. Copyright © 2016 John Wiley & Sons, Ltd.     

Design and performance of a product code turbo encoding-decoding prototype

This paper presents the latest results on a block turbo decoder design. We propose a block turbo decoder circuit for the error protection of small data blocks such asAtm cells on anAwgn (additive white Gaussian noise) channel with a code rate close to 0.5. A prototype was developed atEnst Bretagne. It allowsBer (bit error rate) measurements down to 10^?9 and uses programmable gate arrays (Fpga Xilinx circuits). The elementary extendedBch code and the data block size can be modified to fit specifications of different applications.