Miniaturized ionization gas sensors from single metal oxide nanowires

Gas detection experiments were performed with individual tin dioxide (SnO2) nanowires specifically configured to observe surface ion (SI) emission response towards representative analyte species. These devices were found to work at much lower temperatures (T≈280 °C) and bias voltages (V≈2 V) than their micro-counterparts, thereby demonstrating the inherent potential of individual nanostructures in building functional nanodevices. High selectivity of our miniaturized sensors emerges from the dissimilar sensing mechanisms of those typical of standard resistive-type sensors (RES). Therefore, by employing this detection principle (SI) together with RES measurements, better selectivity than that observed in standard metal oxide sensors could be demonstrated. Simplicity and specificity of the gas detection as well as low-power consumption make these single nanowire devices promising technological alternatives to overcome the major drawbacks of solid-state sensor technologies.     

Chemical dosing for sulfide control in Australia: An industry survey

Controlling sulfide (H₂S) production and emission in sewer systems is critical due to the corrosion and malodour problems that sulfide causes. Chemical dosing is one of the most commonly used measures to mitigate these problems. Many chemicals have been reported to be effective for sulfide control, but the extent of success varies between chemicals and is also dependent on how they are applied. This industry survey aims to summarise the current practice in Australia with the view to assist the water industry to further improve their practices and to identify new research questions. Results showed that dosing is mainly undertaken in pressure mains. Magnesium hydroxide, sodium hydroxide and nitrate are the most commonly used chemicals for sewers with low flows. In comparison, iron salts are preferentially used for sulfide control in large systems. The use of oxygen injection has declined dramatically in the past few years. Chemical dosing is mainly conducted at wet wells and pumping stations, except for oxygen, which is injected into the pipe. The dosing rates are normally linked to the control mechanisms of the chemicals and the dosing locations, with constant or profiled dosing rates usually applied. Finally, key opportunities for improvement are the use of mathematical models for the selection of chemicals and dosing locations, on-line dynamic control of the dosing rates and the development of more cost-effective chemicals for sulfide control.     

Highly linear micropower class AB current mirrors using Quasi-Floating Gate transistors

A design approach to achieve low-voltage micropower class AB CMOS cascode current mirrors is presented. Both class AB operation and dynamic cascode biasing are based on the use of Quasi-Floating Gate transistors. They allow high linearity for large signal currents and accurately set quiescent currents without requiring extra power consumption or supply voltage requirements. Measurement results show that dynamic cascode biasing allows a wider input range and a linearity improvement of more than 23 dB with respect to the use of conventional biasing. A THD value better than −35 dB is measured for input amplitudes up to 100 times the bias currents. Two class AB current mirror topologies are proposed, with slightly different ways to achieve class AB operation and dynamic biasing. The proposed current mirrors, fabricated in a 0.5 µm CMOS technology, are able to operate with a supply voltage of 1.2 V and a quiescent power consumption of only 36 µW, using a silicon area <0.025 mm².     

Parameterized key assignment for confidential communication in wireless networks

Predistribution of cryptographic keys is a widely used approach for establishing secure communication between severely resource-constrained nodes with limited or no access to network infrastructure. Many proposed key predistribution schemes make the implicit assumption that message contents need not be kept private from nodes other than the intended recipient. Messages in such schemes are not guaranteed to be confidential—they may be read by nodes within the network other than the intended recipient. In this paper, we present TASK—a symmetric key predistribution scheme that enables secure and confidential communication within wireless networks. TASK distributes keys by generating and reinforcing a series of template key assignment instances. It is parameterized, which allows it to make use of key storage capacities that other recently proposed schemes cannot. We show, through analysis and simulation, that TASK can achieve a level of security superior to that of two recently proposed schemes that also provide confidentiality. We also demonstrate that the techniques used in TASK (namely parameterization, templatization, and selective reinforcement) can be applied to other key assignment schemes for star or bipartite networks.     

Metal-Coated &lt;100&gt;-Cut GaAs Coupled to Tapered Parallel-Plate Waveguide for Cherenkov-Phase-Matched Terahertz Detection: Influence of Crystal Thickness

The influence of crystal thickness of metal-coated <100>-cut GaAs (M-G-M) on Cherenkov-phase-matched terahertz (THz) pulse detection was studied. The M-G-M detectors were utilized in conjunction with a metallic tapered parallel-plate waveguide (TPPWG). Polarization-sensitive measurements were carried out to exemplify the efficacy of GaAs in detecting transverse magnetic (TM)- and transverse electric (TE)-polarized THz waves. The reduction of GaAs’ thickness increased the THz amplitude spectra of the detected TM-polarized THz electro-optic (EO) signal due to enhanced electric field associated with a more tightly-focused and well-concentrated THz radiation on the thinner M-G-M. The higher-fluence THz beam coupled to the thinner M-G-M improved the integrated intensity of the detected THz amplitude spectrum. This trend was not observed for TE-polarized THz waves, wherein the integrated intensities were almost comparable. Nevertheless, good agreement of spectral line shapes of the superposed TM- and TE-polarized THz-EO signals with that of elliptically polarized THz-EO signal demonstrates excellent polarization-resolved detection capabilities of M-G-M via Cherenkov-phase-matched EO sampling technique.     

A practical approach to electrode-skin impedance unbalance measurement

Unbalance between electrode-skin impedances is a major problem in biopotential recordings, leading to increased power-line interference. This paper proposes a simple, direct method to measure that unbalance at power-line frequency (50-60 Hz), thus allowing the determination of actual recording conditions for biopotential amplifiers. The method is useful in research, amplifier testing, electrode design and teaching purposes. It has been experimentally validated by using both phantom impedances and real electrode-skin impedances.     

Efficient Parallelization of Polyphase Arbitrary Resampling FIR Filters for High-Speed Applications

This article describes a method for increasing the sampling rate of efficient polyphase arbitrary resampling FIR filters. An FPGA proof of concept prototype of this architecture has been implemented in a Xilinx Kintex-7 FPGA which is able to convert the sampling rate of a signal from 500 MHz to 600 MHz. This article compares this new architecture with other best known efficient resampling architectures implemented on the same FPGA. The area usage on the FPGA shows that our proposed implementation is very proficient in high bandwidth applications without requiring significantly more resources on the FPGA. A theoretical calculation of the resampling error introduced on a modulated data stream is provided to evaluate the new architecture against other existing resampling architectures.     

Characterization and exploitation of heterogeneous OFDM primary users in cognitive radio networks

The fundamental features of cognitive radio (CR) systems are their ability to adapt to the wireless environment where they operate and their opportunistic occupation of the licensed spectrum bands assigned to the primary network. CR users in CR systems should not cause any interference to primary users (PUs) of the primary network. For this purpose, CR users need to accurately estimate the features and activities of the primary users. In this paper, a novel characterization of heterogeneous PUs and a novel reconfigurability solution in CR networks are introduced. The characterization of PUs consists of a detector and classifier that distinguishes between heterogenous PUs. The PU characteristics stored in radio environmental maps are utilized by an interference/throughput adapter for the optimization of CR parameters. The performance of the proposed solutions is evaluated by showing false alarm and missed detection probabilities of the detector/classifier in a multipath fading channel with additive white Gaussian noise. Moreover, the impact of the PU characteristics on the CR throughput is analyzed.     

Capacity and interference statistics of highways W-CDMAcigar-shaped microcells (uplink analysis)

The capacity and the interference statistics of the sectors of the shaped W-CDMA cell are studied. A model of five cells is used to analyze the uplink. The cells are assumed to exist in rural zones. The capacity and the interference statistics of the cell are studied using a two-slope propagation model. The expected value and the variance of the interference are given for different propagation exponent