A wind–PV-battery hybrid power system at Sitakunda in Bangladesh

The measured wind data of Local Government Engineering Department (LGED) for 2006 at 30 m height shows a good prospect for wind energy extraction at the site. For a few months and hours the speed is below the cut in speeds of the available turbines in the market. The predicted solar radiation data from directly related measured cloud cover and sunshine duration data of Bangladesh Meteorological Department (BMD) for 1992–2003 indicates that a reliable power system can be developed over the year if the solar energy technology is merged with the wind energy technologies for this site. This research work has studied on optimization of a wind–photovoltaic-battery hybrid system and its performance for a typical community load. The assessment shows that least cost of energy (COE) is about USD 0.363/kWh for a community using 169 kWh/day with 61 kW peak and having minimum amount of access or unused energy. Moreover, compared to the existing fossil fuel-based electricity supply, such an environment friendly system can mitigate about 25 t CO₂/yr. The analysis also indicates that wind–PV-battery is economically viable as a replacement for conventional grid energy supply for a community at a minimum distance of about 17 km from grid.     

Functionally graded structures of refractory metals by wire arc additive manufacturing

ABSTRACT

Functionally graded components are usually preferred for severe and critical service conditions, thanks to the possibility of achieving different complementary material properties within the same structure. Wire?+?Arc Additive Manufacturing is an emerging technology which lends itself well to the production of sound graded structures. In this study, an integral structure of two functional gradients, namely tantalum to molybdenum, and molybdenum to tungsten, was successfully deposited. A linear gradient was observed in both composition and hardness. Microstructure, elemental composition and hardness were characterised as a function of position, and discussed. The study demonstrates that WAAM has the potential to successfully deposit functionally graded structures of refractory metals, obtaining controlled properties.     

Seismic performance of buckling-restrained braced frames with varying beam-column connections

The effect of beam-column connections and brace configurations on the overall seismic response of a medium-rise bucklingrestrained braced frame (BRBF) is analytically evaluated in the present study. Two types of brace configurations (chevron and Double-X) and a combination of the moment-resisting and the non-moment-resisting beam-column connections are considered. A total of five design cases are studied for a seven-story BRBF in which a constant value of response reduction (R) factor equal to 8 is considered in the design. Nonlinear dynamic analyses are carried out for all study frames for an ensemble of forty ground motions representing the DBE and MCE hazard levels. Fragility curves are developed for all study frames considering the interstory drift ratio and residual drift ratio as the damage parameters. Results showed that a higher value of response reduction factor should be adopted in the design of BRBFs for both pinned and rigid beam-column connections. Further, in order to achieve the desired seismic performance of BRBFs, Double-X brace configurations and rigid beam-column connections at the alternate story levels should be used.     

Effect of mineral acids on the production of alumina nanopowder from raw bauxite

In this study a novel synthetic method for the large-scale production of spherical, high surface area and ultra-fine alumina (Al₂O₃) powder has been described. Synthetic Bayer liquor was extracted by alkali fusion of raw bauxite with sodium hydoxide. Alumina nanopowders were synthesised through a ball mill-aided precipitation method using the synthetic Bayer liquor and mineral acid precipitants. The powders produced were characterised by X-ray diffraction (XRD), particle size distribution (PSD), Fourier transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller surface area and pore size analysis, energy-dispersive spectroscopy (EDS), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). In this article, the effects of precipitants such as H₂SO₄, HCl and HNO₃ on crystallite and particle size, surface area, pore volume, and pore size and shape are reported. The experimental results prove that precipitation leads to an aggregated particle that is disaggregated by the ball-milling method. The ball milling process strongly influences the formation of uniform-sized spherical particles with a high surface area. It was revealed that nitric acid is an effective precipitant for controlling particle size and textural properties of Al₂O₃ powder. A nanopowder of γ-Al₂O₃ with an average crystallite size of 3 nm and an average particle size of 58 nm with a specific surface area (SSA) of 190 m² g^− 1 is produced. This article elucidates a new method with a simple reaction scheme for the mass production of Al₂O₃ nanoparticles from raw bauxite for various commercial applications.     

Ferroelectric relaxor behavior in Ba0.925Dy0.075TiO3 ceramic

Temperature and frequency dependence dielectric permittivity of Ba_0.925Dy_0.075TiO₃ ceramic has been studied in the temperature range of 100 K to 350 K at the frequencies, 1 Khz, 10 KHz, 100 KHz and 1 MHz for the first time. Diffuse phase transition and frequency dispersion is observed in the permittivity-vs-temperature plots. This has been attributed to the occurrence of relaxor ferroelectric behavior. The observed relaxor behavior has been quantitatively characterized based on phenomenological parameters. A comparison with the Zr doped BaTiO₃ has also been presented. The microstructure of as sintered samples shows a dense and almost uniform micrograph with some impurity phases, and the grains are almost spherical.     

Preparation of Aluminum Metal Matrix Composite with Novel In situ Ceramic Composite Particulates, Developed from Waste Colliery Shale Material

A novel method is adapted to prepare an in situ ceramic composite from waste colliery shale (CS) material. Heat treatment of the shale material, in a plasma reactor and/or in a high temperature furnace at 1673 K (1400 °C) under high vacuum (10^?6 Torr), has enabled in situ conversion of SiO₂ to SiC in the vicinity of carbon and Al₂O₃ present in the shale material. The composite has the chemical constituents, SiC-Al₂O₃-C, as established by XRD/EDX analysis. Particle sizes of the composite range between 50 nm and 200 μm. The shape of the particles vary, presumably rod to spherical shape, distributed preferably in the region of grain boundaries. The CS composite so produced is added to aluminum melt to produce Al-CS composite (12 vol. pct). For comparison of properties, the aluminum metal matrix composite (AMCs) is made with Al₂O₃ particulates (15 vol. pct) with size <200 μm. The heat-treated Al-CS composite has shown better mechanical properties compared to the Al-Al₂O₃ composite. The ductility and toughness of the Al-CS composite are greater than that of the Al-Al₂O₃ composite. Fractographs revealed fine sheared dimples in the Al-CS composite, whereas the same of the Al-Al₂O₃ composite showed an appearance of cleavage-type facets. Abrasion and frictional behavior of both the composites have been compared. The findings lead to the conclusion that the in situ composite developed from the colliery shale waste material has a good future for its use in AMCs.     

A real-time ferroalloy model for the optimum ladle furnace treatment during the secondary steelmaking

Various means are applied in the steel making process to attain the desired chemistry. The final chemistry adjustments are made predominantly during the secondary metallurgy route in which ferroalloys (FAs) are added. With the availability of various FAs, it becomes necessary to identify the comparatively cheaper and optimum amount of FAs. The traditional practice of manually determining the quantity of FAs could not optimise the complete process. It is, therefore, necessary to determine the optimum FA addition without any human intervention. This paper presents a ferroalloy model in which a two-step incremental approach is adopted in ladle furnace (LF) to resemble the current operational practice. The model is designed such that no external intervention is needed to determine the required FA amount to be added. This results in low cost and high quality. The model after rigorous validation has been implemented in all three LFs in Tata Steel LD shop. This resulted in less FA consumption and achievement of the specified steel chemistry.     

Application of Hybrid Differential Evolution–Grey Wolf Optimization Algorithm for Automatic Generation Control of a Multi-Source Interconnected Power System Using Optimal Fuzzy–PID Controller

This paper deals with an optimal hybrid fuzzy-Proportional Integral Derivative (fuzzy-PID) controller optimized by hybrid differential evolution–Grey Wolf optimization algorithm for automatic generation control of an interconnected multi-source power system. Here a two area system is considered; each area is provided with three types of sources namely a thermal unit with reheat turbine, a hydro unit and a gas unit. The dynamic performance of the system is analyzed under two cases: with AC tie-line and with AC-DC tie-line. The efficiency and effectiveness of the proposed controller is substantiated equally in the two cases. The sturdiness of the system is proved by varying the values of the system parameters. The supremacy of the recommended work is additionally ascertained by comparison with the recently published results like differential evolution optimized PID Controller and hybrid Local Unimodal Sampling-Teaching Learning based Optimization (LUS-TLBO) optimized fuzzy-PID controller. The dynamic performance of the system is observed in terms of settling time, peak overshoot and peak undershoot. Finally the analysis is extended by applying the proposed control technique in two different models namely (i) A three area unequal thermal system considering proper generation rate constraints (GRC) and (ii) A three area hydro-thermal system with mechanical hydro governor. These test results reveal the adaptability of the proposed method in multi-area interconnected power system.     

Redefining the Game in Local Water Management Conflict: A Case Study

The article intends to bring a new perspective on conflict and cooperation analysis addressing a case study of Yoshino river weir conflict (Japan) by the use of drama theory approach. The confrontation arose when the Governmental agency proposed to remove and replace the old weir by a movable modern dam (kodazeki) to prevent future flooding. The Opposition group’s main arguments were that the new weir may not be as effective as compared to the cost of constructing the new renewal project and damage of water quality and ecosystem. Thus, both players are playing the game where their interests are different. Rather than adopting the conventional approach of modeling the conflict using game theory, we propose the alternative approach to describe how the situation evolved and how game can be changed in the context of player’s threats and promises. This also emphasizes that future can be created cooperatively by a group, rather than by way of confrontation in the conflict. This model may bring an effective methodological leverage in conflict and cooperation analysis where we can change the game.     

Sulfonated co-poly(ether imide)s with alkyne groups: Fabrication of crosslinked membranes and studies on PEM properties including MFC performance

A new diamine monomer having alkyne side-groups (DADAF) has been successfully synthesized, and it was used to prepare a series of sulfonated co-polyimides (DFN-XX) when reacted with 1,4,5,8-naphthalenetetracarboxylic dianhydride along with different mole% of 4,4′-diaminostilbene-2,2′-disulfonic acid. The membrane was made from the copolymers by solution casting route, and one of the copolymers DFN-70 was used to prepare crosslinked membranes by adding a different amount of 1,6-hexanediazide during solution casting step. The morphological transformation from non-crosslinked S-coPI to crosslinked S-coPI was observed by employing transmission electron microscopy, atomic force microscopy, and small-angle X-ray scattering analyses. Compared to the non-crosslinked DFN-XX membranes, crosslinked DFN-70 copolymer membranes showed low water uptake and improved mechanical and peroxide radical stability. Also, crosslinked DFN-70 copolymer membranes showed significantly higher proton conductivities (0.004-0.06 S cm⁻¹) compared to those of DFN-70 (0.003-0.05 S cm⁻¹) particularly, at 80°C when the relative humidity increased from 40% to 98%. Furthermore, crosslinked DFN-70 copolymer membranes exhibited significantly enhanced performance in a microbial fuel cell (MFC) as compared to those of non-crosslinked DFN-70 membrane.