Isolation and identification of lipase producing thermophilic Geobacillus sp. SBS-4S: cloning and characterization of the lipase

A thermophilic microorganism, SBS-4S, was isolated from a hot spring located in Gilgit, Northern Areas of Pakistan. It was found to be an aerobic, gram-positive, rod-shaped, thermophilic bacterium that grew on various sugars, carboxylic acids and hydrocarbons at temperatures between 45°C and 75°C. Complete 16S rRNA gene sequence of the microorganism exhibited homology to various species of genus Geobacillus. A highest homology of 99.8% was found with Geobacillus kaustophilus. A partial (0.7 kbp) chaperonin gene sequence also showed a highest homology of 99.4% to that of G. kaustophilus whereas biochemical characteristics of the microorganism were similar to Geobacillus uzenensis. Based on biochemical characterization, 16S rRNA and chaperonin gene sequences, we identified SBS-4S as a strain of genus Geobacillus. Strain SBS-4S produced several extracellular enzymes including amylase, protease and lipase. The lipase encoding gene was cloned, expressed in Escherichia coli and the gene product was characterized. The recombinant lipase was optimally active at 60°C with stability at wide pH range (6-12). The enzyme activity was enhanced remarkably in the presence of Ca(+2). The K(m) and the V(max) for the hydrolysis of p-nitrophenyl acetate were 3.8mM and 2273 μmol min(-1)mg(-1), respectively. The ability of the recombinant enzyme to be stable at a wide pH range makes it a potential candidate for use in industry.     

The Carboxyl Terminal Regions of P0 Protein Are Required for Systemic Infections of Poleroviruses

P0 proteins encoded by poleroviruses Brassica yellows virus (BrYV) and Potato leafroll virus (PLRV) are viral suppressors of RNA silencing (VSR) involved in abolishing host RNA silencing to assist viral infection. However, other roles that P0 proteins play in virus infection remain unclear. Here, we found that C-terminal truncation of P0 resulted in compromised systemic infection of BrYV and PLRV. C-terminal truncation affected systemic but not local VSR activities of P0 proteins, but neither transient nor ectopic stably expressed VSR proteins could rescue the systemic infection of BrYV and PLRV mutants. Moreover, BrYV mutant failed to establish systemic infection in DCL2/4 RNAi or RDR6 RNAi plants, indicating that systemic infection might be independent of the VSR activity of P0. Partially rescued infection of BrYV mutant by the co-infected PLRV implied the functional conservation of P0 proteins within genus. However, although C-terminal truncation mutant of BrYV P0 showed weaker interaction with its movement protein (MP) when compared to wild-type P0, wild-type and mutant PLRV P0 showed similar interaction with its MP. In sum, our findings revealed the role of P0 in virus systemic infection and the requirement of P0 carboxyl terminal region for the infection.     

Sex pheromones of male yellowfin Baikal sculpin (Cottocomephorus grewingki): Isolation and chemical studies

Three components of the male yellowfin Baikal sculpin pheromonal signal have been isolated from urine by diethyl ether extraction, thinayer chromatography (TLC), and high-performance liquid chromatography (HPLC). Using mass spectrometry, we have identified two of them as testosterone (T) and 11-hydroxytestosterone (11HT). These steroids are synthesized in testes during full spermatogenesis, and they are excreted in male urine with milt. The third component is not a steroid. It is more likely to be a polyene alcohol (farnesol). 2Z,6E-Farnesol possesses behavioral activity.     

Poly(vinylidene fluoride‐co‐hexafluoropropylene) (PVDF‐co‐HFP) hollow fiber membranes prepared from PVDF‐co‐HFP/PEG‐600Mw/DMAC solution for membrane distillation

Poly(vinylidene fluoride‐co‐hexafluoropropylene) (PVDF‐co‐HFP) hollow fiber membranes were prepared by using the phase inversion method. The effect of polyethylene glycol (PEG‐600Mw) with different concentrations (i.e., 0, 5, 7, 10, 12, 15, 18, and 20 wt %) as a pore former on the preparation and characterization of PVDF‐co‐HFP hollow fibers was investigated. The hollow fiber membranes were characterized using scanning electron microscopy, atomic force microscopy, and porosity measurement. It was found that there is no significant effect of the PEG concentration on the dimensions of the hollow fibers, whereas the porosity of the hollow fibers increases with increase of PEG concentration. The cross‐sectional structure changed from a sponge‐like structure of the hollow fiber prepared from pure PVDF‐co‐HFP to a finger‐like structure with small sponge‐like layer in the middle of the cross section with increase of PEG concentration. A remarkable undescribed shape of the nodules with different sizes in the outer surfaces, which are denoted as “twisted rope nodules,” was observed. The mean surface roughness of the hollow fiber membranes decreased with an increase of PEG concentration in the polymer solution. The mean pore size of the hollow fibers gradually increased from 99.12 to 368.91 nm with increase of PEG concentration in polymer solution. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation and characterization of poly(vinyl chloride)/polystyrene/poly(ethylene glycol) hollow‐fiber ultrafiltration membranes

Hollow‐fiber ultrafiltration (UF) membranes were prepared from blends of poly(vinyl chloride) (PVC) and polystyrene (PS) with a dry/wet phase inversion method. Poly(ethylene glycol) (PEG) and N,N‐dimethylacetamide were used as the additive and solvent, respectively. The effects of the PEG concentration in the dope solution as an additive on the cross sections and inner and outer surface morphologies, permeability, and separation performance of the hollow fibers were examined. The mean pore size, pore size distribution, and mean roughness of both the inner and outer surfaces of the produced hollow fibers were determined by atomic force microscopy. Also, the mechanical properties of the hollow‐fiber membranes were investigated. UF experiments were conducted with aqueous solutions of poly(vinyl pyrrolidone) (PVP; K‐90, M_w = 360 kDa). From the results, we found that the PVC/PS hollow‐fiber membranes had two layers with a fingerlike structure. These two layers were changed from a wide and long to a thin and short morphology with increasing PEG concentration. A novel and until now undescribed shape of the nodules in the outer surfaces, which was denoted as a sea‐waves shape, was observed. The outer and inner pore sizes both increased with increasing PEG concentration. The water permeation flux of the hollow fibers increased from 104 to 367 L m^?2 h^?1 bar^?1) at higher PEG concentrations. The PVP rejection reached the highest value at a PEG concentration of 4 wt %, whereas at higher values (from 4 to 9 wt %), the rejection decreased. The same trend was found also for the tensile stress at break, Young's modulus, and elongation at break of the hollow fibers. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 130: 989‐1004, 2013     

A novel dynamic bayesian network‐based networked process monitoring approach for fault detection,propagation identification,and root cause diagnosis

A novel networked process monitoring, fault propagation identification, and root cause diagnosis approach is developed in this study. First, process network structure is determined from prior process knowledge and analysis. The network model parameters including the conditional probability density functions of different nodes are then estimated from process operating data to characterize the causal relationships among the monitored variables. Subsequently, the Bayesian inference‐based abnormality likelihood index is proposed to detect abnormal events in chemical processes. After the process fault is detected, the novel dynamic Bayesian probability and contribution indices are further developed from the transitional probabilities of monitored variables to identify the major faulty effect variables with significant upsets. With the dynamic Bayesian contribution index, the statistical inference rules are, thus, designed to search for the fault propagation pathways from the downstream backwards to the upstream process. In this way, the ending nodes in the identified propagation pathways can be captured as the root cause variables of process faults. Meanwhile, the identified fault propagation sequence provides an in‐depth understanding as to the interactive effects of faults throughout the processes. The proposed approach is demonstrated using the illustrative continuous stirred tank reactor system and the Tennessee Eastman chemical process with the fault propagation identification results compared against those of the transfer entropy‐based monitoring method. The results show that the novel networked process monitoring and diagnosis approach can accurately detect abnormal events, identify the fault propagation pathways, and diagnose the root cause variables. © 2013 American Institute of Chemical Engineers AIChE J, 59: 2348–2365, 2013     

Multiway independent component analysis mixture model and mutual information based fault detection and diagnosis approach of multiphase batch processes

Batch process monitoring is a challenging task, because conventional methods are not well suited to handle the inherent multiphase operation. In this study, a novel multiway independent component analysis (MICA) mixture model and mutual information based fault detection and diagnosis approach is proposed. The multiple operating phases in batch processes are characterized by non‐Gaussian independent component mixture models. Then, the posterior probability of the monitored sample is maximized to identify the operating phase that the sample belongs to, and, thus, the localized MICA model is developed for process fault detection. Moreover, the detected faulty samples are projected onto the residual subspace, and the mutual information based non‐Gaussian contribution index is established to evaluate the statistical dependency between the projection and the measurement along each process variable. Such contribution index is used to diagnose the major faulty variables responsible for process abnormalities. The effectiveness of the proposed approach is demonstrated using the fed‐batch penicillin fermentation process, and the results are compared to those of the multiway principal component analysis mixture model and regular MICA method. The case study demonstrates that the proposed approach is able to detect the abnormal events over different phases as well as diagnose the faulty variables with high accuracy. © 2013 American Institute of Chemical Engineers AIChE J, 59: 2761–2779, 2013     

Preparation of Rayon Fiber-Reinforced Polypropylene Composites by Extrusion Techniques

Hybrid composites from rayon fibers (～2–5 cm size) and polypropylene (PP) were fabricated by using an extruder. Fibre content of the composite was varied from 5–30% by weight and physico-mechanical properties of the composites were measured. Surface morphology as observed by SEM showed good interface adhesion between rayon and PP matrix. Furthermore inclusion of rayon (up to 15% fiber inclusion) in the composite increased tensile, bending and hardness properties. As the fiber content in the composite increased more than 15%, physico-mechanical properties decreased due to the decrease of fiber matrix adhesion. The change of tensile properties due to environmental aging was carried out by keeping the composite under soil for 1 month and tensile properties were measured periodically. The aging result suggests that composites retained about 75% of its original tensile and bending strength even after 1 month soil burial. The modified fibers were also used for the study. As such the fibers were treated with vinyl-trimethyoxysilane and methanol solution and irradiated under UV before being used with PP in extruder. The results showed retardation of the physico-mechanical properties for composites obtained from irradiated rayon fibers than the composites fabricated from non irradiated rayon fibers.     

Maleated Natural Rubber as a Coupling Agent for Recycled High Density Polyethylene/Natural Rubber/Kenaf Powder Biocomposites

Kenaf powder (KP) was incorporated into recycled high density polyethylene (rHDPE)/natural rubber (NR) blend using an internal mixer at 165°C and rotor speed of 50 rpm. The tensile strength and elongation at break of the composites decreased, while the tensile modulus increased with increasing filler loading. The water absorption was found to increase as the filler content increased. The maleic anhydride grafted natural rubber was prepared and used to enhance the composites performance. The addition of MANR as a coupling agent improved the tensile properties of rHDPE/NR/KP biocomposites. The water absorption was also reduced with the addition of MANR.