Yodel: A Yield Stress Model for Suspensions

A model for the yield stress of particulate suspensions is presented that incorporates microstructural parameters taking into account volume fraction of solids, particle size, particle size distribution, maximum packing, percolation threshold, and interparticle forces. The model relates the interparticle forces between particles of dissimilar size and the statistical distribution of particle pairs expected for measured or log-normal size distributions. The model is tested on published data of sub-micron ceramic suspensions and represents the measured data very well, over a wide range of volume fractions of solids. The model shows the variation of the yield stress of particulate suspensions to be inversely proportional to the particle diameter. Not all the parameters in the model could be directly evaluated; thus, two were used as adjustable variables: the maximum packing fraction and the minimum interparticle separation distance. The values for these two adjustable variables provided by the model are in good agreement with separate determinations of these parameters. This indicates that the model and the approximations used in its derivation capture the main parameters that influence the yield stress of particulate suspensions and should help us to better predict changes in the rheological properties of complex suspensions. The model predicts the variation of the yield stress of particulate suspensions to be inversely proportional to the particle diameter, but the experimental results do not show a clear dependence on diameter. This result is consistent with previous evaluations, which have shown significant variations in this dependence, and the reasons behind the yield stress dependence on particle size are discussed in the context of the radius of curvature of particles at contact.     

Shear mode coupling and tilted grain growth of A1N thin films in BAW resonators.

Polycrystalline A1N thin films were deposited by RF reactive magnetron sputtering on Pt(111)/Ti electrode films. The substrates were tilted by an angle ranging from 40 degrees to 70 degrees with respect to the target normal. A low deposition temperature and a high sputter gas pressure were found ideal for tilted growth. The resulting grain tilt angle amounts to about half the substrate tilt angle. For coupling evaluation, 5 GHz solidly mounted resonator structures have been realized. The tilted grain A1N films exhibited a permittivity in the 9.5-10.5 range and loss tangent of 0.3%. Two shear modes as well as the longitudinal mode could be clearly identified. The coupling coefficient k2(eff) of the fundamental thickness shear mode (TS0) was found to be about 0.5%, which is compatible with a c-axis tilt of about 6 degrees.     

Evaluation of Soybean Seedcoat Cracking During Drying:PART II. Using MRI

MRI techniques were developed and employed for non-destructive and noninvasive study of seedcoat cracking in low moisture soybean kernels during heated air drying. Proton density image and transient moisture distribution profile of a single soybean kernel can be obtained using MRI. These MRI techniques proved to be particularly useful for the continuous observation of initiation and propagation of seedcoat cracking during the entire period of drying process without interruption.

The proton density images of soybean kernels showed that seedcoat cracking was initiated perpendicular to the long axis of the kernel near the hilum. The transient moisture distribution profiles in soybean kernels during drying indicate that moisture gradient developed during drying was higher in the seedcoat than in the cotyledon. Drying temperature and initial average moisture content were positively correlated with the soyhean seedcoat crackig. The location of the     

Stability, in-Vitro and in-Vivo Release Studies from Metronidazole Ointments

The influence of ointment formulation on the stability, the in-vitro release and the in-vivo absorption through the skin of rabbits was investigated. The choice of the selected ointments has no influence on the drug stability with the exception of an acidified emulsion base. A good correlation between in-vitro release and in-vivo absorption was found revealing that metronidazole was quickly released and effectively absorbed from a polyethylene glycol base.     

Declines in divergent thinking with age: Cross-sectional, longitudinal, and cross-sequential analyses.

Six measures of divergent thinking were administered to 825 men ranging in age from 17 to 101 over the period from 1959 to 1972; repeat administrations were given to a subset of 278 men after a 6-year interval. Cross-sectional analyses showed curvilinear trends, with an increase in scores for men under 40 and a decline thereafter. Repeated measures analyses on subjects initially aged 33 to 74 generally replicated this finding, whereas cross-sequential analyses suggested a decline for all cohorts tested at a later time. Additional analyses suggested that not all of the decline could be attributed to reduced speed of response production. These longitudinal findings confirm earlier cross-sectional reports of decline in divergent thinking abilities with age. (PsycINFO Database Record (c) 2010 APA, all rights reserved)     

Mixed-Cation Oxide Powders via Resin Intermediates Derived from a Water-Soluble Polymer

Submicrometer powders of complex oxides were prepared via resin intermediates based on a starch type of organic precursor. A commercially available water-soluble starch derivative was (for the first time) used as the organic base for solution synthesis of ceramic powders. Calcination of the charred, fluffy, amorphous resins at a temperature below 600°C for 4 h yielded perovskite powders of Sr-doped LaMnO₃ and Sr-doped La(Fe,Co)O₃. Sr-doped LaCrO₃ needed to be calcined above 750°C to ensure phase purity and to remove organic residue. Due to the low cost of starch derivatives, the process has the potential of being more economical than the commonly used Pechini's type process, which utilizes citric acid and ethylene glycol.     

Functional polymers

Summary Polymeric antioxidants prepared from 2,6-di-tertiary-butyl-4-vinyl (4-lsopropenyl)phenol and butadiene or isoprene, and their hydrogenated products (6-8 mol % of phenolic AO in the polymer) were tested by oxygen uptake studies for their effectiveness as antioxidants for polyolefins and polydienes. The polymeric antioxidants seem to be slightly less effective in short-term protection against oxidation at 150° C as compared to low molecular weight antioxidants, but more effective in long-term protection of the polymer samples at a level of 0.1 weight percent.Part 43: P. Grosso, O. Vogl: J. Macromol. Sci. Chem., in pressNow Chemical Company, Midland, MI 48674, USATo whom all correspondence should be addressed: Herman F. Mark Professor of Polymer Science, Polytechnic Institute of New York, Brooklyn, NY 11201, USA