Lipid Transfer to HDL is Higher in Marathon Runners than in Sedentary Subjects,but is Acutely Inhibited During the Run

Although exercise increases HDL-cholesterol, exercise-induced changes in HDL metabolism have been little explored. Lipid transfer to HDL is essential for HDL’s role in reverse cholesterol transport. We investigated the effects of acute exhaustive exercise on lipid transfer to HDL. We compared plasma lipid, apolipoprotein and cytokine levels and in vitro transfer of four lipids from a radioactively labeled lipid donor nanoemulsion to HDL in sedentary individuals (n = 28) and in marathon runners (n = 14) at baseline, immediately after and 72 h after a marathon. While HDL-cholesterol concentrations and apo A1 levels were higher in marathon runners, LDL-cholesterol, apo B and triacylglycerol levels were similar in both groups. Transfers of non-esterified cholesterol [6.8 (5.7–7.2) vs. 5.2 (4.5–6), p = 0.001], phospholipids [21.7 (20.4–22.2) vs. 8.2 (7.7–8.9), p = 0.0001] and triacylglycerol [3.7 (3.1–4) vs. 1.3 (0.8–1.7), p = 0.0001] were higher in marathon runners, but esterified-cholesterol transfer was similar. Immediately after the marathon, LDL- and HDL-cholesterol concentrations and apo A1 levels were unchanged, but apo B and triacylglycerol levels increased. Lipid transfer of non-esterified cholesterol [6.8 (5.7–7.2) vs. 5.8 (4.9–6.6), p = 0.0001], phospholipids [21.7 (20.4–22.2) vs. 19.1 (18.6–19.3), p = 0.0001], esterified-cholesterol [3.2 (2.2–3.8) vs. 2.3 (2–2.9), p = 0.02] and triacylglycerol [3.7 (3.1–4) vs. 2.6 (2.1–2.8), p = 0.0001] to HDL were all reduced immediately after the marathon but returned to baseline 72 h later. Running a marathon increased IL-6 and TNF-α levels, but after 72 h these values returned to baseline. Lipid transfer, except esterified-cholesterol transfer, was higher in marathon runners than in sedentary individuals, but the marathon itself acutely inhibited lipid transfer. In light of these novel observations, further study is required to clarify how these metabolic changes can influence HDL composition and anti-atherogenic function.     

Influence of granulometry and organic treatment of a Brazilian montmorillonite on the properties of poly(styrene‐co‐n‐butyl acrylate)/layered silicate nanocomposites prepared by miniemulsion polymerization

The influence of granulometry and organic treatment of a Brazilian montmorillonite (MMT) clay on the synthesis and properties of poly(styrene‐co‐n‐butyl acrylate)/layered silicate nanocomposites was studied. Hybrid latexes of poly(styrene‐co‐butyl acrylate)/MMT were synthesized via miniemulsion polymerization using either sodium or organically modified MMT. Five clay granulometries ranging from clay particles smaller than 75 μm to colloidal size were selected. The size of the clay particles was evaluated by specific surface area measurements (BET). Cetyl trimethyl ammonium chloride was used as an organic modifier to enhance the clay compatibility with the monomer phase before polymerization and to improve the clay distribution and dispersion within the polymeric matrix after polymerization. The sodium and organically modified natural clays as well as the composites were characterized by X‐ray diffraction analysis. The latexes were characterized by dynamic light scattering. The mechanical, thermal, and rheological properties of the composites obtained were characterized by dynamical‐mechanical analysis, thermogravimetry, and small amplitude oscillatory shear tests, respectively. The results showed that smaller the size of the organically modified MMT, the higher the degree of exfoliation of nanoplatelets. Hybrid latexes in presence of Na‐MMT resulted in materials with intercalated structures. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Tensile performance and crack propagation of coated woven fabrics under multiaxial loads

The tensile performance of coated woven fabrics under multiaxial loads is examined in the present study. Two groups of experiments were conducted to investigate the influences of the configuration of the fabric specimen and the loading speed on the multiaxial tensile properties of the fabrics. The configuration of the specimen for the multiaxial tensile tests is identified as gear‐shape with large arm widths. A loading speed of lower than 20 mm/min is suggested to obtain the tensile properties of the coated woven fabrics under multiaxial loads. The tensile performances of coated woven fabrics under uni‐, bi‐, and multiaxial loads were compared. We found that the tensile performances under bi‐ and multiaxial loads are much better than those under uniaxial loads. Therefore, for the application of the coated woven fabrics in lightweight structures, biaxial or multiaxial loading conditions will be necessary. Experiments on the specimens with an initial crack in the center under multiaxial loads show that, by comparison with other loading directions, the tensile properties in warp direction of the coated woven fabrics play an important role in the failure performance and crack propagation under multiaxial loads. To eliminate the dependence on the mechanical properties in warp direction, the balance of the two principle directions of coated woven fabrics should be improved. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Simulations of Self-Expanding Braided Stent Using Macroscopic Model of NiTi Shape Memory Alloys Covering R-Phase

Self-expanding stents or stentgrafts made from Nitinol superelastic alloy are widely used for a less invasive treatment of disease-induced localized flow constriction in the cardiovascular system. The therapy is based on insertion of a stent into a blood vessel to maintain the inner diameter of the vessel; it provides highly effective results at minimal cost and with reduced hospital stays. However, since stent is an external mechanical healing tool implemented into human body for quite a long time, information on the mechanical performance of it is of fundamental importance with respect to patient’s safety and comfort. Advantageously, computational structural analysis can provide valuable information on the response of the product in an environment where in vivo experimentation is extremely expensive or impossible. With this motivation, a numerical model of a particular braided self-expanding stent was developed. As a reasonable approximation substantially reducing computational demands, the stent was considered to be composed of a set of helical springs with specific constrains reflecting geometry of the structure. An advanced constitutive model for NiTi-based shape memory alloys including R-phase transition was employed in analysis. Comparison to measurements shows a very good match between the numerical solution and experimental results. Relation between diameter of the stent and uniform radial pressure on its surface is estimated. Information about internal phase and stress state of the material during compression loading provided by the model is used to estimate fatigue properties of the stent during cyclic loading.     

Methamphetamine Blocks Adenosine A2A Receptor Activation via Sigma 1 and Cannabinoid CB1 Receptors

Methamphetamine is, worldwide, one of the most consumed drugs of abuse. One important side effect is neurodegeneration leading to a decrease in life expectancy. The aim of this paper was to check whether the drug affects one of the receptors involved in neurodegeneration/neuroprotection events, namely the adenosine A_2A receptor (A_2AR). First, we noticed that methamphetamine does not affect A_2A functionality if the receptor is expressed in a heterologous system. However, A_2AR becomes sensitive to the drug upon complexes formation with the cannabinoid CB₁ receptor (CB₁R) and the sigma 1 receptor (σ₁R). Signaling via both adenosine A_2AR and cannabinoid CB₁R was affected by methamphetamine in cells co-expressing the two receptors. In striatal primary cultures, the A_2AR–CB₁R heteromer complex was detected and methamphetamine not only altered its expression but completely blocked the A_2AR- and the CB₁R-mediated activation of the mitogen activated protein kinase (MAPK) pathway. In conclusion, methamphetamine, with the participation of σ₁R, alters the expression and function of two interacting receptors, A_2AR, which is a therapeutic target for neuroprotection, and CB₁R, which is the most abundant G protein-coupled receptor (GPCR) in the brain.     

Effects of acid leaching treatment of soda-lime silicate glass on crack initiation and fracture

Water or acid soaking surface treatments have been shown to increase the mechanical strength of soda-lime silicate (SLS) glasses. This increase in strength has traditionally been attributed to effects related to residual stress or changes in fracture resistance. In this work, we report experimental data that cannot be explained based on the existing knowledge of glass surface mechanics. In dry environments, annealed and acid-leached SLS surfaces have comparable crack initiation stress and fracture stress as measured by Hertzian indentation and biaxial bending tests, respectively. Yet, in the presence of humidity, acid-leached surfaces have higher failure stress than the annealed surfaces. This apparent enhancement in the crack resistance of the acid-leached surface of SLS glass in humid environments supports the hypothesis that acid-leached surface chemistry can lower the transport kinetics of molecular water to critical flaws.     

Kidney-Protector Lipidic Cilastatin Derivatives as Structure-Directing Agents for the Synthesis of Mesoporous Silica Nanoparticles for Drug Delivery

Mesoporous silica nanomaterials have emerged as promising vehicles in controlled drug delivery systems due to their ability to selectively transport, protect, and release pharmaceuticals in a controlled and sustained manner. One drawback of these drug delivery systems is their preparation procedure that usually requires several steps including the removal of the structure-directing agent (surfactant) and the later loading of the drug into the porous structure. Herein, we describe the preparation of mesoporous silica nanoparticles, as drug delivery systems from structure-directing agents based on the kidney-protector drug cilastatin in a simple, fast, and one-step process. The concept of drug-structure-directing agent (DSDA) allows the use of lipidic derivatives of cilastatin to direct the successful formation of mesoporous silica nanoparticles (MSNs). The inherent pharmacological activity of the surfactant DSDA cilastatin-based template permits that the MSNs can be directly employed as drug delivery nanocarriers, without the need of extra steps. MSNs thus synthesized have shown good sphericity and remarkable textural properties. The size of the nanoparticles can be adjusted by simply selecting the stirring speed, time, and aging temperature during the synthesis procedure. Moreover, the release experiments performed on these materials afforded a slow and sustained drug release over several days, which illustrates the MSNs potential utility as drug delivery system for the cilastatin cargo kidney protector. While most nanotechnology strategies focused on combating the different illnesses this methodology emphasizes on reducing the kidney toxicity associated to cancer chemotherapy.     

Corrosion Behaviour of Type 316L Stainless Steel in Hot Caustic Aqueous Environments

Metals and Materials International - The corrosion behaviour of type 316L stainless steel in aqueous 30–50 wt%. NaOH at temperatures up to 90 °C has been elucidated....     

Mitotic, but not meiotic, oriented cell divisions in rat spermatogenesis

The process of mammalian spermatogenesis involves both mitosis and meiosis at the same developmental age. Most previous studies have focused on mitotic spindle orientation during development, but not during meiotic division. Therefore, we asked whether there is a difference between mitotic and meiotic germ cell spindle orientation during rat spermatogenesis. Our results showed that mitotic spindles of spermatogonia were mainly oriented with angles ranging from 60 to 90 degrees, perpendicular in relation to the basement membrane of the seminiferous tubules. On the other hand, meiotic spindles showed a random orientation. Nocodazole treatment (at a concentration that depolymerizes only astral microtubules) induced a significant increase in cells with an angle between 0 and 30 degrees (parallel) in relation to the basement membrane. Meiotic spindles did not show a significant change in their orientation after the Nocodazole treatment. Therefore, our results suggest differences between the mechanisms controlling positioning and orientation of mitotic and meiotic spindles during rat spermatogenesis. It seems that a phylogenetically conserved programme controls the mitotic spindle orientation in organisms ranging from worms to mammals.     

Methodology for Predicting the Phase Envelope of a Heavy Crude Oil and Its Asphaltene Deposition Onset

Abstract

We have presented general ideas to develop a new theoretical methodology, based on molecular simulation and equations of state, for obtaining the phase envelope and to predict pressure, volume, temperature (PVT) conditions of asphaltene precipitation by only taking into account the composition of the heavy crude oil and an asphaltene average molecular structure. Those results show that asphaltene precipitation is a reversible thermodynamic process. The precipitated phase is a liquid phase which consists of mainly asphaltene and some heavy fractions from the crude. This methodology can be applied to find complete phase diagrams of different crude oils based on an asphaltene average molecular structure and the composition of crude oil.