Neutral point voltage balancing of five-level inverter fed by twelve-pulse rectifier

The paper presents 5-level, neutral point clamped, H-bridge inverter fed by 12-pulse rectifier. Two configurations of rectifier and inverter neutral point connection are studied: the first configuration with disconnected neutral points and the second configuration with connected neutral points. Furthermore, novel neutral point voltage balancing methods suitable for the presented configurations are proposed. Extensive simulation results of the proposed configurations with the neutral point voltage balancing methods are presented. The simulation results deal with aspects such as total harmonic distortion (THD) Factor of the inverter output currents, and voltages, grid current, harmonic content, frequency spectrum distribution. The results confirm the effectiveness of the proposed methods. The voltage balancing methods are compared and their advantages and disadvantages are explained.     

Short communication: Conservation of Streptococcus uberis adhesion molecule and the sua gene in strains of Streptococcus uberis isolated from geographically diverse areas

The objective was to identify and sequence the sua gene (GenBank no. DQ232760; http://www.ncbi.nlm.nih.gov/genbank/) and detect Streptococcus uberis adhesion molecule (SUAM) expression by Western blot using serum from naturally S. uberis-infected cows in strains of S. uberis isolated in milk from cows with mastitis from geographically diverse areas of the world. All strains evaluated yielded a 4.4-kb sua-containing PCR fragment that was subsequently sequenced. Deduced SUAM AA sequences from those S. uberis strains evaluated shared >97% identity. The pepSUAM sequence located at the N terminus of SUAM was >99% identical among strains of S. uberis. Streptococcus uberis adhesion molecule expression was detected in all strains of S. uberis tested. These results suggest that sua is ubiquitous among strains of S. uberis isolated from diverse geographic locations and that SUAM is immunogenic.     

Morphological changes produced by acid dissolution in Er:YAG laser irradiated dental enamel

Several scientific reports have shown the effects of Er:YAG laser irradiation on enamel morphology. However, there is lack of information regarding the morphological alterations produced by the acid attack on the irradiated surfaces. The aim of this study was to evaluate the morphological changes produced by acid dissolution in Er:YAG laser irradiated dental enamel. Forty‐eight enamel samples were divided into four groups (n = 12). GI (control); Groups II, III, and IV were irradiated with Er:YAG at 100 mJ (12.7 J/cm²), 200 mJ (25.5 J/cm²), and 300 mJ (38.2 J/cm²), respectively, at 10 Hz without water irrigation. Enamel morphology was evaluated before‐irradiation, after‐irradiation, and after‐acid dissolution, by scanning electron microscopy (SEM). Sample coating was avoided and SEM analysis was performed in a low‐vacuum mode. To facilitate the location of the assessment area, a reference point was marked. Morphological changes produced by acid dissolution of irradiated enamel were observed, specifically on laser‐induced undesired effects. These morphological changes were from mild to severe, depending on the presence of after‐irradiation undesired effects. Microsc. Res. Tech. 77:410–414, 2014. © 2014 Wiley Periodicals, Inc.     

Short-term screening of multiple phytogenic compounds for their potential to modulate chewing behavior,ruminal fermentation profile,and pH in cattle fed grain-rich diets

In cattle, proper rumen functioning and digestion are intimately linked to chewing behavior. Yet, high grain feeding impairs chewing activity, increasing the risk of subacute ruminal acidosis and dysfermentation. This study aimed to screen 9 different phytogenic compounds for their potential to modulate chewing activity, meal size, rumino-reticular short-chain fatty acids (SCFA), and pH during consumption in a first daily meal and shortly thereafter in cattle fed a grain-rich diet. Treatments were control (total mixed ration without phytogenic) or addition of a phytogenic compound at a low or high dose. Phytogenic compounds and doses (all in mg/kg) were angelica root (6.6 and 66), capsaicin (10 and 100), gentian root (6.6 and 66), garlic oil (0.3 and 3), ginger extract (40 and 400), L-menthol (6.7 and 67), mint oil (15.3 and 153), thyme oil (9.4 and 94), and thymol (5 and 50), for the low and high groups, respectively. Before the start of the screening experiment, cows were fed to reach subacute ruminal acidosis conditions, confirmed with the time of ruminal pH <5.8 being 655 ± 148.2 min/d. During the screening experiment, the treatments were offered in a controlled meal (2.5 kg of DM for 4 h) as part of the daily diet with 65% concentrate. Each treatment was tested in 4 of the 9 cannulated Holstein cows using an incomplete Latin square design. Ruminal and reticular fluids were sampled before and after each treatment, and data collected before the meal were used as covariates. Chewing and ruminal pH were monitored during the treatment, followed by 2 h of complete feed restriction, and then 4 h of ad libitum feed intake without phytogenic. Data showed that supplementation of angelica root tended to linearly increase rumination time immediately after the first meal when feed was restricted (27.3, 41.9, and 42.6 ± 5.99 min for control, low and high groups, respectively). Capsaicin increased eating time (43.6, 49.4, and 66.4 ± 4.93 min) during consumption but did not affect ruminal total SCFA or mean ruminal pH. Garlic oil reduced the concentration of reticular total SCFA (75.7, 71.3, and 60.1 mM) and tended to decrease ruminal acetate-to-propionate ratio (2.50, 1.78, and 1.87 ± 0.177) with no effect on ruminal pH. The L-menthol affected reticular total SCFA quadratically (76.1, 64.9, and 81.0 ± 4.22%), and ruminal pH responded quadratically when feed was reintroduced ad libitum (6.0, 6.3, and 6.1 ± 0.07). Mint oil did not affect chewing or total SCFA during consumption, but the low dose increased ruminal pH (6.5, 6.7, and 6.5 ± 0.08). Thyme oil tended to lower the severity of ruminal acidosis. Overall, phytogenic compounds demonstrated distinct dose-dependent effects to beneficially influence chewing behavior, modulate fermentation, and mitigate ruminal acidosis in dairy cows under a high-grain challenge diet.     

Phase Equilibria in the Al-Co-Ni Alloy System

The phase equilibria in the Ni-Co rich region (<50 at.%Al) of the Al-Co-Ni system were studied experimentally for two isothermal sections at 1100 and 800 °C. Metallography, energy dispersive spectroscopy, hardness and x-ray diffraction were used for characterization and determination of γ, γ′ and β phases within the ternary system. Phase boundaries in the isothermal sections and a partial liquidus projection are modified compared to previously published work. Comparison is made to the isothermal sections computed using Thermo-Calc and the TCNI8 database. No definitive experimental evidence corroborating the predicted existence of a Nishizawa horn was obtained.     

Improvement of InN layers deposited on Si(111) by RF sputtering using a low-growth-rate InN buffer layer

We investigate the influence of a low-growth-rate InN buffer layer on structural and optical properties of wurtzite nanocrystalline InN films deposited on Si(111) substrates by reactive radio-frequency sputtering. The deposition conditions of the InN buffer layer were optimized in terms of morphological and structural quality, leading to films with surface root-mean-square roughness of ~ 1 nm under low-growth-rate conditions (60 nm/h). The use of the developed InN buffer layer improves the crystalline quality of the subsequent InN thick films deposited at high growth rate (180 nm/h), as confirmed by the narrowing of X-ray diffraction peaks and the increase of the average grain size of the layers. This improvement of the structural quality is further confirmed by Raman scattering spectroscopy measurements. Room temperature PL emission peaking at ~ 1.58 eV is observed for InN samples grown with the developed buffer layer. The crystal and optical quality obtained for InN films grown on Si(111) using the low-growth-rate InN buffer layer become comparable to high-quality InN films deposited directly on GaN templates by RF sputtering.     

The Relationship between COVID-19 and Hypothalamic–Pituitary–Adrenal Axis: A Large Spectrum from Glucocorticoid Insufficiency to Excess—The CAPISCO International Expert Panel

Coronavirus disease 2019 (COVID-19) is a highly heterogeneous disease regarding severity, vulnerability to infection due to comorbidities, and treatment approaches. The hypothalamic–pituitary–adrenal (HPA) axis has been identified as one of the most critical endocrine targets of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) that might significantly impact outcomes after infection. Herein we review the rationale for glucocorticoid use in the setting of COVID-19 and emphasize the need to have a low index of suspicion for glucocorticoid-induced adrenal insufficiency, adjusting for the glucocorticoid formulation used, dose, treatment duration, and underlying health problems. We also address several additional mechanisms that may cause HPA axis dysfunction, including critical illness-related corticosteroid insufficiency, the direct cytopathic impacts of SARS-CoV-2 infection on the adrenals, pituitary, and hypothalamus, immune-mediated inflammations, small vessel vasculitis, microthrombotic events, the resistance of cortisol receptors, and impaired post-receptor signaling, as well as the dissociation of ACTH and cortisol regulation. We also discuss the increased risk of infection and more severe illness in COVID-19 patients with pre-existing disorders of the HPA axis, from insufficiency to excess. These insights into the complex regulation of the HPA axis reveal how well the body performs in its adaptive survival mechanism during a severe infection, such as SARS-CoV-2, and how many parameters might disbalance the outcomes of this adaptation.     

乌斯特:全新的HVI分析工具

对于原棉纤维性能的深入了解有助于纺纱厂在挑选和管理纤维时做出更为优化的决策,乌斯特技术公司推出的USTERHVIMF100可帮助纺纱厂改善纤维选择和纤维管理,从而降低成本、提高利润和改善产品质量。     

The Effects of Probiotics,Prebiotics and Synbiotics in Non-Alcoholic Fat Liver Disease (NAFLD) and Non-Alcoholic Steatohepatitis (NASH): A Systematic Review

Modifications in the microbiota caused by environmental and genetic reasons can unbalance the intestinal homeostasis, deregulating the host’s metabolism and immune system, intensifying the risk factors for the development and aggravation of non-alcoholic fat liver disease (NAFLD). The use of probiotics, prebiotics and synbiotics have been considered a potential and promising strategy to regulate the gut microbiota and produce beneficial effects in patients with liver conditions. For this reason, this review aimed to evaluate the effectiveness of probiotics, prebiotics, and symbiotics in patients with NAFLD and NASH. Pubmed, Embase, and Cochrane databases were consulted, and PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analysis) guidelines were followed. The clinical trials used in this study demonstrated that gut microbiota interventions could improve a wide range of markers of inflammation, glycemia, insulin resistance, dyslipidemia, obesity, liver injury (decrease of hepatic enzymes and steatosis and fibrosis). Although microbiota modulators do not play a healing role, they can work as an important adjunct therapy in pathological processes involving NAFLD and its spectrums, either by improving the intestinal barrier or by preventing the formation of toxic metabolites for the liver or by acting on the immune system.     

Effect of binder system on the thermophysical properties of 3D-printed zirconia ceramics

Fabrication of 3D-printed ceramic parts with high complexity and high spatial resolution often demands low wall thickness as well as high stiffness at the green state, whereas printing simpler geometries may tolerate thicker, more compliant walls with the advantage of a rapid binder-burn-out and sintering process. In this work, the influence of the binder system on the thermophysical properties of 3D-printed stabilized zirconia ceramics was investigated. Samples were fabricated with the lithography-based ceramic manufacturing (LCM) technology using two different photosensitive ceramic suspensions (LithaCon 3Y230 and LithaCon 3Y210), with the same ZrO₂ powder. A significant difference in stiffness in the green state (~3 MPa vs. ~32 MPa for LithaCon 3Y230 and LithaCon 3Y210, respectively) was measured, associated with a rather loose or a linked network formed in the binder due to photopolymerization. Both materials reached high relative densities, that is, >99%, exhibiting a homogeneous fine-grained microstructure. No significant differences on the coefficient of thermal expansion (11.18 ppm/K vs. 11.17 ppm/K) or Young's modulus (207 GPa vs. 205 GPa) were measured, thus demonstrating the potential of tailoring binder systems to achieve the required accuracy in 3D-printed parts, without detrimental effects on material's microstructure and thermophysical properties at the sintered state.