Computation of feed-paths for casting solidification using level-set-method

The aim of the present work is to compute feed-paths and hot-spots by combining level-set-method based sharp interface and feed-path model. The model is based on the solution of energy and level-set equations in solid and liquid, with Stefan condition on the interface. The energy and level-set equation are discretized using finite-volume and finite-difference method, respectively. Feed-path is computed by tracking mass-less particles along the liquid-solid interface during solidification using combined Eulerian-Lagrangian framework. The proposed model is benchmarked on six test cases, where temperature contours and solidification time are compared with a finite-element-method based commercial software. The capability to predict the temporal evolution of interface and to identify multiple hot-spots is validated with an industrial aluminum-alloy lug casting. The numerical as well as experimental validations demonstrate the effectiveness of level-set-method for feed-path calculation.     

Morphological, structural, and functional properties of maranta (Maranta arundinacea L) starch

Starch isolated from maranta (Maranta arundinacea) tuber and studied for its various physicochemical characteristics. The amylose content of the starch was 24.8%. SEM showed that the granules were small indented and spherical. Maranta starch granule size has a range of 2.92–6.42 μm, (mean of 4.84 μm), length/degree of 1.20, and roundness of 0.73. Maranta starch has a gelatinization temperature of 74.8°C, peak viscosity of 498 BU, and cold paste viscosity of 669 BU. It also possessed higher freeze-thaw stability. Dynamic rheological properties of maranta starch, measured using parallel plate geometry showed increased storage modulus (G’) values, while loss modulus (G″) values were decreased with increasing frequency values (0–100 Hz). The low gelatinization temperature and high freeze thaw stability of starch indicates its potential for application as a thickener in food industries.     

Influence of Experimental Parameters on Friction and Wear Mechanisms of PA66/PTFE Blend Reinforced with Glass Fiber

Polymer blend of composition 80 wt% polyamide 66/20 wt% polytetraflurotheylene (PA66/PTFE) was selected as a matrix and reinforced with different weight percentage of short glass fibers (SGF). These composites were prepared by melt mix method using twin screw extruder followed by injection molding. The tribological behaviors were tested by using pin on disc machine by varying the different experimental parameters. The friction and wear mechanisms were studied as a function of sliding velocity, sliding load, and distance. The effect of fiber loading lowered the wear volume loss of SGF filled PA66/PTFE blend. The least frictional coefficient of 0.24 was obtained for 20 wt% of SGF in the blend. However, the wear resistance was not apparently improved by SGF loading in the experimental range for comparison with unfilled PA66/PTFE blend. The worn surfaces of specimen were examined by scanning electron microscopy photographs. The observations revealed that the frictional behavior was a function of development and formation of transfer film. Matrix wear and fiber wear were the result of frictional mechanism. The critical wear volume of PA66/PTFE/SGF composites was the contribution of both matrix and fiber wear. The abrasive nature of SGF was also one of the important factor for frictional behavior.     

Investigation of Microstructures,Mechanical Properties of AZ91E Hybrid Composite Reinforced with Silicon Carbide and Fly Ash

Silicon - In this study, the stir casting processing technique was used to produce the AZ91E hybrid composite reinforced with Silicon Carbide (SiC) and Fly ash (FA) particles in different weight...     

Study on effect of diverse air inlet arrangement on thermal management of cylindrical lithium-ion cells

Lithium-ion cells are preferred in the electrical powertrain due to high-power density, compactness, and modularity. In real driving conditions, the cells undergo discharge rates as high as 4 C resulting in high heat generation affecting the performance. To obtain the maximum performance the pack construction and thermal management of cells are crucial parameters. In our work, air-cooled technique with diverse air inlet and staggered scheme with a two-channel partition approach for thermal management of the cylindrical lithium-ion cells are studied in computational fluid dynamics. The simulation model is validated with experimental results. The obtained results demonstrate that the cells in the dual-directional air inlet arrangement had low maximum temperature difference among and within the cells and required least fan work. This arrangement required least fan work to generate optimal air inlet velocity of 2 m/s for 1, 2, and 3 C and 4 m/s for 4 C discharge rates. There is a reduction of 50% and 33% fan work for 3 and 4 C discharge rates, which are the majority operating points. Also, it shows that the temperature uniformity within the cells has improved. The results of this study can used to optimize parameters for designing an enhanced thermal management system.     

A study of external mass transfer effect on biodegradation of phenol using low‐density polyethylene immobilized Bacillus flexus GS1 IIT (BHU) in a packed bed bioreactor

The impact of external mass transport on the biodegradation rate of phenol in a packed bed bioreactor (PBBR) was studied. A potential bacterial species, Bacillus flexus GS1 IIT (BHU), was isolated from the petroleum‐contaminated soil. Low‐density polyethylene (LDPE) immobilized with the B. flexus GS1 IIT (BHU) was used as packing material in the PBBR. The PBBR was operated by varying the inlet feed flow rate from 4 to 10 mL/min, and the corresponding degradation rate coefficients were found to be in the range of 0.119–0.157 L/g h. In addition, the highest removal rate of phenol was obtained to be 1.305 mg/g h at an inlet feed rate of 10 mL/min. The external mass transfer was studied using the model . A new empirical correlation for the biodegradation of phenol in the PBBR was developed after the evaluation at various values of K and n.