Analytic evaluation of the cycle time on networked conflicting timed event graphs in the (Max,+) algebra

This work deals with performance evaluation of Conflicting Timed Event Graph (CTEG), a class of Petri net exhibiting phenomena such as synchronization, parallelism and resources sharing. It is well known that the dynamic of Timed Event Graphs (TEG) admits a linear state space representation in the (Max,+) algebra which makes the analysis and control of this class easier. There is also a possibility of associating conflicts with the TEGs by adding conflict places that are mostly considered as safe; this extended class is called CTEG. We first present an analytic evaluation of the cycle time of CTEG as a function of the cycle time of each TEG and of the timers of the conflict places. Finally, in a more general context, we look for a relaxation of the safety hypothesis on the conflict places in order to model and evaluate the cycle time on CTEGs with multiple shared resources.     

Asphalt concrete stability estimation from non-destructive test methods with artificial neural networks

The core drilling method has often been used to determine the current status of asphalt concretes. However, this method is destructive so causes damage to the asphalt concretes. In addition, this method causes localized points of weakness in the asphalt concretes and is time consuming. In recent years, non-destructive testing methods have been used for pavement thickness estimation, determination of elasticity modulus, and density and moisture measurements. In this study, the above-mentioned non-destructive and destructive tests with data obtained by applying the Marshall stability to the same asphalt concretes were estimated using the artificial neural networks approach.     

Single cell elemental analysis using nuclear microscopy

The use of Particle Induced X-ray Emission (PIXE), Rutherford Backscattering Spectrometry (RBS) and Scanning Transmission Ion Microscopy (STIM) to provide quantitative elemental analysis of single cells is an area which has high potential, particularly when the trace elements such as Ca, Fe, Zn and Cu can be monitored. We describe the methodology of sample preparation for two cell types, the procedures of cell imaging using STIM, and the quantitative elemental analysis of single cells using RBS and PIXE. Recent work on single cells at the Nuclear Microscopy Research Centre,National University of Singapore has centred around two research areas: (a) Apoptosis (programmed cell death), which has been recently implicated in a wide range of pathological conditions such as cancer, Parkinson’s disease etc, and (b) Malaria (infection of red blood cells by the malaria parasite). Firstly we present results on the elemental analysis of human Chang liver cells (ATTCC CCL 13) where vanadium ions were used to trigger apoptosis, and demonstrate that nuclear microscopy has the capability of monitoring vanadium loading within individual cells. Secondly we present the results of elemental changes taking place in individual mouse red blood cells which have been infected with the malaria parasite and treated with the anti-malaria drug Qinghaosu (QHS).     

Mechanical characterization of highly porous β-Si3N4 ceramics fabricated via partial sintering & starch addition

In this study, porous β-Si₃N₄ ceramics containing limited amount of Sm₂O₃ and CaO as sintering aids were produced by addition of potato starch (10 and 20 vol.%) and partial sintering. Two different Si₃N₄ powders, α- and β-, were used as starting materials. Scanning electron microscopy investigations revealed that development of elongated β-Si₃N₄ grains were much more pronounced when α-Si₃N₄ starting powder was used. Even though porosity values of the compositions prepared by using α-Si₃N₄ (～57.0–58.4%) is significantly higher than the samples produced by β-Si₃N₄ (42.6%), no significant change was observed for the bending strength, fracture toughness and Weibull modulus. This indicates that microstructural features have a significant contribution to the mechanical properties of the porous materials in terms of bending strength and fracture toughness.     

The effect of bulk-fill flowable composites on the fracture resistance and cuspal deflection of endodontically treated premolars

The aim of this study was to evaluate the effect of bulk-fill flowable composites on cuspal deflection and fracture resistance of endodontically treated teeth. Forty-two maxillary premolars were subjected to endodontic treatment followed by the preparation of mesioocclusodistal cavities. Teeth were divided into six groups according to restorative materials as follows: Group 1: Clearfil Majesty Flow and Clearfil Majesty Posterior; Group 2: Venus Bulk Fill and Clearfil Majesty Posterior; Group 3: Clearfil Majesty Posterior; Group 4: Vertise Flow and Clearfil Majesty Posterior; Group 5: SDR and Clearfil Majesty Posterior; and Group 6: x-tra base and Clearfil Majesty Posterior. A single-step self-etch adhesive (OptiBond All-in-One) was applied to all groups, except Group 4. The cavities were restored with a centripetal incremental insertion technique and flowable composites using a 2-mm-thick base material, except for Group 3. The distance between cusp tips was measured before and after the cavity preparations, after the restorations, and after thermal cyclus with a digital micrometer. After measuring, each tooth was subjected to compressive loading with a stainless steel ball (4 mm diameter) perpendicular to the occlusal surface with a crosshead speed of 1 mm/min, and mean loads necessary to fracture were recorded in Newtons. The data were statistically analyzed by Kruskal–Wallis test. No statistically significant differences were found between groups in fracture strength or cuspal deflections (p > 0.05). Bulk-fill flowable composite bases did not change the cuspal deflection or fracture resistance of endodontically treated teeth, compared with that of a conventional flowable base and conventional resin composite.     

Influence of β-Si3N4 particle size and heat treatment on microstructural evolution of α:β-SiAlON ceramics

In the present study, we report the effects of starting β-Si₃N₄ particle sizes and post-sintering heat treatment on microstructure evolution and mechanical properties of prepared α-β SiAlON ceramics. Three different β-Si₃N₄ starting powders, with particle sizes of 2, 1 and 0.5 μm were used to prepare α-β SiAlON ceramics by gas-pressure sintering. Elongated β-SiAlON grain morphology was identified in the samples prepared using 0.5 μm particle size β-Si₃N₄ powder. Low-aspect ratio grain morphology was observed in samples prepared from starting powders with coarse particles (2 μm and 1 μm). The sintered samples were further heat treated to develop desired microstructure with elongated grains. The hardness and indentation fracture toughness values of sintered and heat treated samples were found to lie in the range of 12.4-14.2 GPa and 5.1-6.4 MPa m^1/2 respectively. It was revealed that fracture toughness increases with decrease in particle size of starting β-Si₃N₄ powder.     

Scanning electron microscopy and micro-Raman spectroscopy of slip layers of Hellenistic ceramic wares from Dorylaion/Turkey

Anatolia (Asia Minor) was inhibitated by several civilizations during the history. Dorylaion at Eski?ehir/Turkey, an ancient site, is on the crossroads of many ancient civilizations. Artifacts belonging to different historical periods and cultures have been uncovered during the excavations carried out there since 1989. One of the two important groups of ceramic findings uncovered in these excavation works is the moldmade bowls, familiarly known as the Megarian bowls and the other is the West Slope wares. Both types of wares were probably the fashion cups around the east Mediterranean basin of the Hellenistic period. In this study, an attempt was made to enlighten the technological parameters and production technology of selected Megarian bowls and West Slope wares by characterizing their slip layers. Scanning electron microscopy (SEM) and energy dispersive X-ray spectrometry (EDX) were performed for microstructural and microchemical characterization. Micro-Raman spectroscopy was further applied for assessing the mineralogical components. The slip layers of both wares have similar elemental diversity, apart from the fact that the West Slope wares have more iron content than the Megarian bowls. The iron rich composition of the slip layers in different colors showed that hematite (α-Fe₂O₃), maghemite (γ-Fe₂O₃) and magnetite (Fe₃O₄) are the principal coloring agents for the slip layers of the investigated Hellenistic ceramic wares. However, firing conditions affecting the formation and the abundance of these minerals were probably adjusted in order to obtain the desired color.     

Real‐time temperature and photon transmission measurements for monitoring phase separation during the formation of poly(N‐isopropylacrylamide) gels

Phase separation during the formation of poly(N‐isopropylacrylamide) (PNIPA) hydrogels was investigated using real‐time photon transmission and temperature measurements. The hydrogels were prepared by free‐radical crosslinking polymerization of N‐isopropylacrylamide (NIPA) in the presence of N,N′‐methylenebisacrylamide (BAAm) as a crosslinker in an aqueous solution. The onset reaction temperature T₀ was varied between 20 and 28°C. Following an induction period, all the gelation experiments resulted in exothermic reaction profiles. A temperature increase of 6.5 ± 0.6°C was observed in the experiments. It was shown that the temperature increase during the formation and growth process of PNIPA gels is accompanied by a simultaneous decrease in the transmitted light intensities I_tr. The decrease in I_tr at temperatures below the lower critical solution temperature of PNIPA was explained by the concentration fluctuations due to the inhomogeneity in the gel network. At higher temperatures, it was shown that the gel system undergoes a phase transition via a spinodal decomposition process. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3589–3595, 2002     

Microstructural Characterization of Reactively Sintered Mullites

Mullite ceramics have been produced by reaction sintering of powders prepared using pseudoboehmite–colloidal silica and aluminum sulfate–colloidal silica mixtures. The microstructural development of these mullites was studied by a number of transmission electron microscopy based techniques including diffuse dark field, Fresnel fringe defocus imaging, and high-resolution transmission electron microscopy. This characterization procedure showed that mullite ceramics free from glassy phases at triple junctions and grain boundaries could be produced from both mixtures using suitable sintering temperatures and alumina/silica ratios. The wetting of grain boundaries by glass, occurring in the mullite ceramics from either incomplete reaction between alumina and silica components or release of silica from the mullite structure with increasing temperature, was found to depend on the prior thermal history of the ceramics.     

Oxidation behavior of electrically conductive α/β SiAlON composites with segregated network of TiCN

The oxidation behavior of novel electrically conductive α/β SiAlON composites with a continuous network of 2.5–10 vol% TiCN particulates was investigated. Composites, produced by coating spray dried granules with nano TiCN particles by a simple blending method, were gas pressure sintered at 1990 °C for 1 h under 10 MPa N₂ pressure. Oxidation tests were carried out between 800 °C and 1200 °C in air for 2 and 48 h in atmosphere of dry air. Below 1000 °C, the formation of TiO₂ crystals on the surfaces of TiCN particles was observed. Before the glass transition temperature of intergranular phase (T_g < 1000 °C), it was revealed that oxidation is controlled by the diffusion of oxygen into pre-formed TiO₂ particles. Above T_g, liquid glass dissolves the intergranular phase elements such as Ti, Y, and Si at the interface between TiCN and SiAlON particles. Migration of Ti towards the (opening point of the TiCN network) surface was found to be the main reason for the formation of subsurface porosity that slows down Ti diffusion through the surface. Moreover, it was detected that at high temperatures surface porosity filled by the intergranular glassy phase. Consequently, the oxidation rate was found to be decreased due to the slower oxygen diffusion.