Investigation of the stability of tablets prepared from sucrose and citric acid anhydride utilizing response surface methodology

Inversion of sucrose is a stability problem particularly of candies with acidic taste that contain sucrose and small amounts of organic acids such as citric acid, since the free d-fructose produced by hydrolysis is hygroscopic. The following possibilities were investigated for preventing the hydrolysis of sucrose in tablets containing sucrose and citric acid: Adding various amounts of tri-sodium citrate to the formulation to neutralize the citric acid, (Hot) melt coating of citric acid and tri-sodium citrate with a vegetable fat at different coating ratios, variation of the ratio of coated citric acid and tri-sodium citrate in formulations, and compressing the formulations with different compression forces. After tablet processing and storage of tablets, the concentration of d-fructose was determined on the basis of enzymatic reactions. A response surface central composite design was used. The above-mentioned variations were chosen as independent variables and the amount of d-fructose was chosen as response variable. The lowest rates of inversion could be achieved by increasing the content of tri-sodium citrate and the ratio of coating material and decreasing the ratio of coated citric acid and tri-sodium citrate in the tablet formulations. The compression force had no significant effect on the inversion of sucrose.     

Trifluoromethanesulphonic acid catalysed transalkylation between tetrabromobisphenol-a and toluene for the production of 2,6-dibromophenol

The preparation of 2,6-dibromophenol is described. This compound, useful as raw material for brominated poly(phenyleneoxide) and pyrogallol or derived pharmaceuticals/pesticides, was prepared in 80% (isolated) yield by a transalkylation reaction between tetrabromobisphenol-A and toluene. The catalyst, trifluoromethanesulphonic acid, can be simply recovered and recycled. Perfluorinated resin sulphonic acid (NAFION-H®, DuPont) did not effectively catalyse this transalkylation.     

Mena, a relative of VASP and Drosophila Enabled, is implicated in the control of microfilament dynamics

This paper examines the effects of exposure to mass media messages promoting family planning on the reproductive behaviour of married women in Nigeria using cross-sectional data. Longitudinal data are also used to ensure that exposure to media messages pre-dates the indicators of reproductive behaviour. Cross-sectional analysis suggests that: (1) contraceptive use and intention are positively associated with exposure to mass media messages, and (2) women who are exposed to media messages are more likely to desire fewer children than those who are not exposed to such messages. Similarly, analysis of the longitudinal data shows that exposure to mass media messages is a significant predictor of contraceptive use. Thus, exposure to mass media messages about family planning may be a powerful tool for influencing reproductive behaviour in Nigeria.     

Vakuumgerechte Werkstoffe und Verbindungstechnik

In Part 1 (Henning, Materials used in Vacuum Technology), the application possibilities of different materials in vacuum technology were described. Part 2 describes the most important non-detachable connections of these materials to produce components that can be used in vacuum technology. The following processes are suitable for this purpose:

• ○ Welding

• ○ Soldering

• ○ Glueing

• ○ Fusion

For this reason, these four processes will be discussed in detail here; their advantages and disadvantages described and their worthiness for use in vacuum technology indicated. It should be noted here that other nondetachable connections such as rivets, point welding, projection seam welding or roll seam welding do not meet the demands of gas tightness made in vacuum technology and cannot, therefore, be used for such purposes.     

Method for determining musculotendon parameters in subject-specific musculoskeletal models of children developed from MRI data

Accurate knowledge of muscle-tendon parameters in biomechanical models is critical for accurate simulation and analyses of human movement. An excellent example of this is the creation of subject-specific models from magnetic resonance imaging (MRI). When Hill-type muscle models are used to calculate muscle forces, the determination of muscle attachment points, optimal fiber length, tendon slack length and maximum isometric force all have a significant influence on the joint moment-angle behavior of the model. In the present study a method was developed for customizing the values of muscle-tendon parameters in a generic model to create subject-specific biomechanical models from MRI. The method was applied by generating musculoskeletal models for the biomechanical simulation platform OpenSim, but the workflow is equally well applicable to other simulation platforms. New computational algorithms are described for identifying joint centers and for reconstructing the centroids of the muscle bellies from MRI. A?process is also described for the extraction of the muscle paths and for identifying the positions of ??via-points?? used to model muscles wrapping over bones. Finally, a new algorithm is described for adjusting the values of optimal fiber length, tendon slack length and maximum isometric force based on a comparison of the model results with experiment. We tested our computational algorithms by developing subject-specific biomechanical models of five typically developed children (age 9.5±1.7?years) from MRI. The joint moment-angle relationships calculated for the subject-specific models were similar to those determined for corresponding scaled generic models. The results indicate that the proposed methodology is suitable for developing subject-specific models of healthy children. Future studies should investigate how abnormalities of the musculoskeletal system, such as tibial torsion and muscle spasticity, can be integrated into the modeling process.     

Gaschromatographisch-massenspektrometrische Untersuchung der im Modellsystem Cystein/Methionin/Furfural unter R?stbedingungen gebildeten Aromastoffe

Zusammenfassung Das Modellsystem Cystein/Methionin/Furfural lieferte unter Röstbedingungen ein komplexes Reaktionsgemisch, das sich mittels Adsorptionschromatographie auf Kieselgel und Capillar-GC in ca. 130 Komponenten auftrennen ließ, von denen 85 capillargaschromatographisch-massenspektrometrisch charakterisiert wurden. Furfural und die aus Cystein und Methionin resultierenden reaktiven Abbauprodukte H₂S, Cysteamin und Methylmercaptan sind wichtige Precursor für heterocyclische Flavorkomponenten. Neben Furanen, (Furan)-aldiminen und schwefelsubstituierten Furanderivaten werden auchN-Furfurylpyrrole, Pyridine, Thiazole, Thiazoline, Thiazolidine, Thiophene sowie aliphatische Schwefelverbindungen und cyclische Methylenpolysulfide gebildet. Beim Kaffeerösten entsteht Furfural als eine der Furanhauptkomponenten und spielt bei der Genese wesentlicher Kaffeearomastoffe eine zentrale Rolle.

---

Gaschromatographic-mass spectrometric investigation of aroma compounds from the reaction of cysteine and methionine with furfural under roasting conditions

Summary The model-system cysteine/methionine/furfural produced under roasting conditions a complex mixture of compounds which was separated by adsorption chromatography on silica gel, according to the increasing polarity of the components, into six fractions. The fractions were investigated by capillary gas chromatography with and without mass spectrometry. Of the approx. 130 compounds detected, 85 were identified and quantified. Furfural and the reactive degradation products H₂S, cysteamine and methylmercaptan, resulting from cysteine and methionine, are important precursors for heterocyclic flavor components. Besides furans, (furan)aldimines, and sulphur-substituted furan derivates, the following compounds are also formed:N-furfurylpyrroles, pyridines, thiazoles, thiazolines, thiazolidines, thiophenes, as well as aliphatic sulphur compounds and cyclic methylene polysulfides. During coffee roasting, furfural is produced as one of the major components of the furans and is essential for the formation of important coffee aroma constituents.

---

---

Poster-Präsentation beim Deutschen Lebensmittelchemikertag in Bremen (14.–16. Sept. 1988)     

New telechelic polymers and sequential copolymers by polyfunctional initiator-transfer agents (inifers)

Summary Novel oxycarbonyl isocyanate telechelic polyisobutylenes have been prepared by conversion of hydroxylterminated polyisobutylenes with N-chlorocarbonyl isocyanate. This reaction is free from side-reactions and provides highly reactive isocyanate-terminated polyisobutylene prepolymers. Conversion of these prepolymers with glycol, urea, pentaerythritol, and polyethylene glycol led to linear chain extension, crosslinking, and multiblock copolymer formation, respectively.