Pathways and pitfalls of implementing the use of woodfuels in Germany's bioenergy sector

The paper presents an empirical study on the use of woody biomass for energy supply in Germany and the federal state of Brandenburg. It aims to explain the role forestry enterprises have for bioenergy provision in this area. The ‘Institutions of Sustainability’ framework is used as an analytical tool to investigate the role of private and public actors in these transactions, respectively, in the governance structures they are subject to. Empirical evidence was gathered by in-depth interviews with actors from forestry and bioenergy practice. Triggered by favorable governance structures, i.e. strong support by national and regional policies, rising prices for fossil energy sources, and co-operation of committed individuals and groups, a new bioenergy industry has been successfully established. However, the forestry sector has so far been just a marginal fuel supplier for this industry. The study identifies pitfalls impeding a broad implementation of wood-energy supply in forestry: not cost-covering prices offered by the bioenergy sector, lacking market transparency and security of supply, lacking mobilization of forest wood, and a preference among forest managers to sell products to the wood-processing industry. In terms of the Institutions of Sustainability the properties of transactions (asset specificities, uncertainties, separability), characteristics of actors (values, rationality) and governance structures (long-term contractual obligations elsewhere) are decisive in explaining the current form of transaction.     

Consideration of the mechanical behaviour of small fatigue cracks

The mechanical behaviour of small fatigue cracks is investigated for a low, medium and high strength material. At first an elastic consideration is performed which give a good impression how the stress fields change with crack size. In part 2 a full elastic-plastic analysis of short cracks is performed using a new numerical scheme to simulate the growth of shear bands emanating from the crack tip. The influence of material and loading paramters as well as of the crack size on the plastic crack tip opening displacement is discussed. It is also investigated how it is possible to get a conservative estimate of the crack tip deformation at small cracks.     

A new model of the effect of stirring intensity on the rate of secondary nucleation

Secondary nucleation in industrial crystallizers depends on both supersaturation and mechanical stress by stirring. Most models which consider mechanical stress assume that nucleation is proprotional to the energy transferred to the crystals during collisions. This is not based on any physical relationship and, in addition, the models do not satisfactorily reproduce the experimental results. Own model, based on the theory of Hertz/Huber, which accounts for the stress of the crystals caused by impact, gave better results. This well-known and proven theory allows the calculation of the volume abraded during collisions between crystals and stirrer or walls. Introducing a nucleate efficienncy, the effect of mechanical stress on the rate of secondary nucleation, due to stirring intensity and crystallizer size, can be determined.     

Influence of impurities and deformation temperature on the saturation microstructure and ductility of HPT-deformed nickel

Ni with different purities between 99.69 and 99.99 wt.% was deformed by high-pressure torsion (HPT) to high strains, where no further refinement of the microstructure is observed. The HPT deformation temperature varied between −196 and 400 °C. Both impurities and temperature significantly affect the lower limit of the grain size obtained by HPT. In the investigated samples, carbon was the most important impurity element in controlling the limit of grain refinement. The decrease in grain size due to an increase in the carbon content from 0.008 to 0.06 wt.% for HPT-deformed Ni samples at room temperature enhanced the ultimate tensile strength from 1000 to 1700 MPa. Surprisingly, the carbon content did not deteriorate the ductility, defined as the reduction in area, which is mainly limited by the total amount of impurities besides carbon. Furthermore, the deformation temperature dependency on ductility was not very pronounced and only visible for deformation temperatures above 200 °C.     

An experimental evaluation of a residential-sized evaporatively cooled condenser

In this paper, the performance of an innovative evaporatively cooled condenser is compared with that of a conventional air-cooled condenser for a split heat pump system. The system was tested in an environmentally controlled test chamber that was able to simulate test conditions as specified by ASHRAE Standard 116. Tests to optimize refrigerant charge and short tube restrictor size were conducted using refrigerant HCFC-22. The wheel rotation speed of the evaporative condenser was also optimized experimentally to maximize the coefficient of performance. Using these optimum parameters, steady state and cyclic performance tests were conducted. The experimental results showed that the evaporative condenser has a higher capacity than the air-cooled condenser by 1.8 to 8.1%, a higher COP by 11.1 to 21.6%, and a higher SEER by 14.5%.     

Quantitative phase evaluation of converter slags

The slags formed in the LD vessel during the refining process turn out with different chemical compositions, mineralogical structures and physical properties, in dependence on the charging and processing conditions. Electron probe microanalysis (EPMA) combined with a data processing method for mineralogical analysis was used to characterize the mineralogical phases in LD slags and moreover to determine their volume fractions. By this method some correlations between the phase contents and the chemical composition of LD slags were established. The diagrams gained from this work have proven to be a valuable aid for understanding the interrelationships between the chemical composition, the mineralogical structure and some physical properties of LD slags.     

A note on stability in three-phase-lag heat conduction

In this note we consider two cases in the theory of the heat conduction models with three-phase-lag. For each one we propose a suitable Lyapunov function. These functions are relevant tools which allow to study several qualitative properties. We obtain conditions on the material parameters to guarantee the exponential stability of solutions. The spectral analysis complements the results and we show that if the conditions obtained to prove the exponential stability are not satisfied, then we can obtain the instability of solutions for suitable domains. We believe that this kind of results is fundamental to clarify the applicability of the models.