Competitive effects of free volume,rigidity, and self-adaptivity on indentation response of silicoaluminoborate glasses

Lithium aluminoborate glasses have recently been found to feature high resistance to crack initiation during indentation, but suffer from relatively low hardness and chemical durability. To further understand the mechanical properties of this glass family and their correlation with the network structure, we here study the effect of adding SiO₂ to a 25Li₂O–20Al₂O₃–55B₂O₃ glass on the structure and mechanical properties. Addition of silica increases the average network rigidity, but meanwhile its open tetrahedral structure decreases the atomic packing density. Consequently, we only observe a minor increase in hardness and glass transition temperature, and a decrease in Poisson's ratio. The addition of SiO₂, and thus removal of Al₂O₃ and/or B₂O₃, also makes the network less structurally adaptive to applied stress, since Al and B easily increase their coordination number under pressure, while this is not the case for Si under modest pressures. As such, although the silica-containing networks have more free volume, they cannot densify more during indentation, which in turn leads to an overall decrease in crack resistance upon SiO₂ addition. Our work shows that, although pure silica glass has very high glass transition temperature and relatively high hardness, its addition in oxide glasses does not necessarily lead to significant increase in these properties due to the complex structural interactions in mixed network former glasses and the competitive effects of free volume and network rigidity.     

Processing of CaLa2S4 infrared transparent ceramics: A comparative study of HP and FAST/SPS techniques

The densification of CaLa₂S₄ (CLS) powders prepared by combustion method was investigated by the use of Field-Assisted Sintering Technique (FAST) and Hot Pressing (HP). CLS powders were sintered using FAST at 1000°C at different pressures and heating rates and sintered by HP under 120 MPa from 800°C to 1100°C for 6 hours with a heating rate of 10°C/min. Comparison of both techniques was further realized by use of the same conditions of pressure, dwell time, and heating rate. Complementary techniques (XRD, SEM-EDS, density measurements, FTIR spectroscopy) were employed to correlate the sintering processes/parameters to the microstructural/compositional developments and optical transmission of the ceramics. Both sintering techniques produce ceramics with submicrometer grain size and relative density of about 99%. Nevertheless, HP is more suitable to densify CLS ceramics without fragmentation and also reach higher transmission than FAST. Transmission of 40%–45% was measured out of a possible maximum of 69% based on the Fresnel losses in the 8-14 μm window when HP is applied at 1000°C for 6 hours under 120 MPa. In both techniques, ceramics undergo reduction issues that originate from graphitic sintering atmosphere.     

Development of Fluorogenic Probes for Rapid High-Contrast Imaging of Transient Nuclear Localization of Sirtuin 3

Protein labeling using fluorogenic probes enables the facile visualization of proteins of interest. Herein, we report new fluorogenic probes consisting of a rationally designed coumarin ligand for the live-cell fluorogenic labeling of the photoactive yellow protein (PYP)-tag. On the basis of the photochemical mechanisms of coumarin and the probe–tag interactions, we introduced a hydroxy group into an environment-sensitive coumarin ligand to modulate its spectroscopic properties and increase the labeling reaction rate. The resulting probe had a higher labeling reaction rate constant and a greater fluorescence OFF–ON ratio than any previously developed PYP-tag labeling probe. The probe enabled the fluorogenic labeling of intracellular proteins within minutes. Furthermore, we used our probe to investigate the localization of sirtuin 3 (SIRT3), a mitochondrial deacetylase. Although the nuclear localization of SIRT3 has been controversial, this transient nuclear localization was clearly captured by the rapid, high-contrast imaging enabled by our probe.     

Alternating anoxic feast/aerobic famine condition for improving granular sludge formation in sequencing batch airlift reactor at reduced aeration rate

In this study the influence of a pre-anoxic feast period on granular sludge formation in a sequencing batch airlift reactor is evaluated. Whereas a purely aerobic SBR was operated as a reference (reactor R2), another reactor (R1) was run with a reduced aeration rate and an alternating anoxic-aerobic cycle reinforced by nitrate feeding. The presence of pre-anoxic phase clearly improved the densification of aggregates and allowed granular sludge formation at reduced air flow rate (superficial air velocity (SAV) = 0.63 cm s⁻¹). A low sludge volume index (SVI₃₀ = 45 mL g⁻¹) and a high MLSS concentration (9–10 g L⁻¹) were obtained in the anoxic/aerobic system compared to more conventional results for the aerobic reactor. A granular sludge was observed in the anoxic/aerobic system whilst only flocs were observed in the aerobic reference even when operated at a high aeration rate (SAV = 2.83 cm s⁻¹). Nitrification was maintained efficiently in the anoxic/aerobic system even when organic loading rate (OLR) was increased up to 2.8 kg COD m⁻³ d⁻¹. In the contrary nitrification was unstable in the aerobic system and dropped at high OLR due to competition between autotrophic and heterotrophic growth. The presence of a pre-anoxic period positively affected granulation process via different mechanisms: enhancing heterotrophic growth/storage deeper in the internal anoxic layer of granule, reducing the competition between autotrophic and heterotrophic growth. These processes help to develop dense granular sludge at a moderate aeration rate. This tends to confirm that oxygen transfer is the most limiting factor for granulation at reduced aeration. Hence the use of an alternative electron acceptor (nitrate or nitrite) should be encouraged during feast period for reducing energy demand of the granular sludge process.     

Adventitial Tertiary Lymphoid Organs as Potential Source of MicroRNA Biomarkers for Abdominal Aortic Aneurysm

Abdominal aortic aneurysm (AAA) is an inflammatory disease associated with marked changes in the cellular composition of the aortic wall. This study aims to identify microRNA (miRNA) expression in aneurysmal inflammatory cells isolated by laser microdissection from human tissue samples. The distribution of inflammatory cells (neutrophils, B and T lymphocytes, mast cells) was evaluated in human AAA biopsies. We observed in half of the samples that adventitial tertiary lymphoid organs (ATLOs) with a thickness from 0.5 to 2 mm were located exclusively in the adventitia. Out of the 850 miRNA that were screened by microarray in isolated ATLOs (n = 2), 164 miRNAs were detected in ATLOs. The three miRNAs (miR-15a-3p, miR-30a-5p and miR-489-3p) with the highest expression levels were chosen and their expression quantified by RT-PCR in isolated ATLOs (n = 4), M1 (n = 2) and M2 macrophages (n = 2) and entire aneurysmal biopsies (n = 3). Except for the miR-30a-5p, a similar modulation was found in ATLOs and the two subtypes of macrophages. The modulated miRNAs were then evaluated in the plasma of AAA patients for their potential as AAA biomarkers. Our data emphasize the potential of miR-15a-3p and miR-30a-5p as biomarkers of AAA but also as triggers of ATLO evolution. Further investigations will be required to evaluate their targets in order to better understand AAA pathophysiology.     

An end‐to‐end alternative to TCP PEPs: Initial Spreading,a TCP fast start‐up mechanism

While Transmission Control Protocol (TCP) Performance Enhancing Proxy (PEP) solutions have long been undisputed to solve the inherent satellite problems, the improvement of the regular end‐to‐end TCP congestion avoidance algorithms and the recent emphasis on the PEPs drawbacks have opened the question of the PEPs sustainability. Nevertheless, with a vast majority of Internet connections shorter than ten segments, TCP PEPs continue to be required to counter the poor efficiency of the end‐to‐end TCP start‐up mechanisms. To reduce the PEPs dependency, designing a new fast start‐up TCP mechanism is therefore a major concern. But, while enlarging the Initial Window (IW) up to ten segments is, without any doubt, the fastest solution to deal with a short‐lived connection in an uncongested network, numerous researchers are concerned about the impact of the large initial burst on an already congested network. Based on traffic observations and real experiments, Initial Spreading has been designed to remove those concerns whatever the load and type of networks. It offers performance similar to a large IW in uncongested network and outperforms existing end‐to‐end solutions in congested networks. In this paper, we show that Initial Spreading, taking care of the satellite specificities, is an efficient end‐to‐end alternative to the TCP PEPs. Copyright © 2015 John Wiley & Sons, Ltd.     

Optimal and heuristic solution methods for a multiprocessor machine scheduling problem

This paper deals with the scheduling of operations on a multiprocessor machine in the context of shoe manufacturing. Multiprocessor machines are composed of several parallel processors. Unlike parallel machines, the entire machine needs to be stopped whenever a single processor needs a setup. Our industrial partner, one of the major winter-shoe manufacturers in Canada, offers a relatively large variety of models. For each of these models, all the sizes proposed by this manufacturer must be produced in various quantities. Our objective is to schedule the production of the required sizes on the machine's different processors in order to minimize the global makespan, which includes both the production time and the set up time. We first present a mathematical formulation of the problem. Then, we introduce a decomposition procedure based on the mathematical model, and we demonstrate that this procedure is very efficient for small- and medium-size instances. We also propose two construction heuristics and two improvement heuristics for larger problems, and we report the results of our extensive computational experiments to demonstrate the quality of the proposed heuristics in terms of reducing production time and computational effort.     

An improved interface model for molten corium-concrete interaction

In the field of research for Severe Accidents of PWRs, calculation results are needed to estimate when corium achieves basemat melt-through. In this framework, knowledge of the heat transfer coefficient as well as the temperature at the interface between the melt and the solid are key issues. It has been previously emphasized that physico-chemistry of the melt (composition) affects the temperature. However, the effect of gas sparging and liquid concrete release on the mechanical stability of the solid layer and on the interface temperature has not been analysed in detail. ARTEMIS 1D tests were launched to analyse the phenomenology at the interface. A general conclusion for all these tests is that a solid medium enriched in refractory species exists at the interface between the pool and the concrete.Tests 2 and 6, which are close to reactor representative conditions, could be well described with the assumption T_interface = T_liquidus. The analysis of tests 3 and 4 revealed that the interfacial medium is thicker by a factor of 4-5 times than calculated with the assumption of pure conduction heat transfer. Detailed analysis leads to the conclusion that the interfacial medium is made of a porous layer of refractory particles embedded in a liquid phase. The liquid density difference, between the porous medium and chimneys, results in recirculation of the liquid in the porous layer. This recirculation is responsible for a convective contribution to heat transfer through the porous layer. The convective heat flux is partly linked to cooling of the recirculating liquid, but also to its partial solidification. The solidification results in gradual plugging and enrichment of the porous layer in refractory species and in the increase of the resistance to heat transfer. The phenomena have been modelled and ARTEMIS tests 3 and 4 are well reproduced. The complete plugging of the porous medium, associated with thermodynamic equilibrium at the interface between the solid medium and the pool leads naturally to the solid crust model implemented in TOLBIAC-ICB. The latter model appears, thus, as a simplification of the porous medium approach described here.Thick interfacial layers, which have composition between refractory and corium mixture, have been observed in ACE and MACE tests with LCS (Limestone-Common Sand) or Limestone concrete and can be explained with the proposed model approach. For siliceous concrete, convection within a porous medium is not possible due to the large viscosity.     

A Novel Approach for Modeling Mixed Convection Film Boiling for a Vertical Flat Plate

A numerical model is developed to study mixed convection film boiling over a vertical flat plate. The integral form of conservation equations for each phase along with the appropriate interface conditions due to phase change is transformed into ordinary differential equation (ODE)-form. The length scale used in the model is based on Rayleigh–Taylor instability wave at the liquid–vapor interface. The heat transfer associated in the process is assessed and results are validated successfully for different available experimental results for natural convection and mixed convection film boiling. The mixed convection film boiling is characterized in terms of relevant nondimensional parameters for each phase.