A direct-conversion CMOS transceiver for the 802.11a/b/g WLAN standard utilizing a Cartesian feedback transmitter

A fully integrated dual-band transceiver is implemented in 0.18-/spl mu/m CMOS and is compliant with the IEEE 802.11a/b/g standards. The direct-conversion transceiver occupies 12 mm/sup 2/ in a QFN-40 package. A fractional-N synthesizer operates at twice the channel frequency, covering continuously bands from 4.9 to 5.9 GHz, as well as the 2.4-GHz band. The 5- and 2.4-GHz receivers achieve a sensitivity level below -73 dBm in the 54-Mb/s mode and below -93 dBm in the 6-Mb/s mode, while consuming 230 mW. A fast RSSI-channel power-detection system allows to power-down signal processing in the listen mode. The 5- and 2.4-GHz transmitters implement a wideband Cartesian feedback loop for enhanced EVM performances and improved spectrum masks compliance. The transmitters deliver -2-dBm average power with an EVM of 3% in the 54-Mb/s mode while consuming 300 mW.     

Direct Oxidation of an Alloy Precursor Complete Oxidation of Bismuth and Zinc Powder

This work reports on a process (DOPA: Direct Oxidation of a Precursory Alloy) of preparation of ceramics used as varistors for the electric protection against power surges. This new route has been applied for the production of ZnO varistors doped with Bi₂O₃, Sb₂O₃ and other oxides. One important stage of this process is the total conversion of an alloy into the corresponding mixed oxide. We have reported here the studies of the full conversions metal-ceramic powders of the main components of these varistors: zinc and bismuth.     

Non-Newtonian fluidisation of spherical particles

This work presents the development of a new model based on the submerged object concept in order to characterise the expansion of spherical particles fluidised by non-Newtonian purely viscous liquids, especially at intermediate and high bed void fractions values. In order to take the interactions between the particles into account a parameter called hydraulic tortuosity is introduced which is a function of the Reynolds number and porosity. A method allowing its evaluation is proposed. Based on the test of a lot of experimental data from our laboratory and from previous works, this model is shown to give satisfactory results for porosities values larger than 0.6. In order to cover the entire range of porosities corresponding to the particles expansion a capillary-type model is proposed for the lower values of the porosities. This model is found to give satisfactory results in the range of bed void fraction comprised between the value corresponding to the minimum of fluidisation ε_mf and ε=0.65. The combination of the two models tested on 21 independent sets of data concerning viscoinelastic shear-thinning liquids leads to a mean error of 16%. It is also shown to give accurate predictions for Newtonian liquids. A comparison is also presented with the prediction of some of the widely used equations available in literature.     

Wavelet-based combined signal filtering and prediction.

We survey a number of applications of the wavelet transform in time series prediction. We show how multiresolution prediction can capture short-range and long-term dependencies with only a few parameters to be estimated. We then develop a new multiresolution methodology for combined noise filtering and prediction, based on an approach which is similar to the Kalman filter. Based on considerable experimental assessment, we demonstrate the powerfulness of this methodology.     

Structure and Stability of Carbohydrate–Lipid Interactions. Methylmannose Polysaccharide–Fatty Acid Complexes

We report a detailed study of the structure and stability of carbohydrate–lipid interactions. Complexes of a methylmannose polysaccharide (MMP) derivative and fatty acids (FAs) served as model systems. The dependence of solution affinities and gas‐phase dissociation activation energies (E_a) on FA length indicates a dominant role of carbohydrate–lipid interactions in stabilizing (MMP+FA) complexes. Solution ¹H NMR results reveal weak interactions between MMP methyl groups and FA acyl chain; MD simulations suggest the complexes are disordered. The contribution of FA methylene groups to the E_a is similar to that of heats of transfer of n‐alkanes from the gas phase to polar solvents, thus suggesting that MMP binds lipids through dipole‐induced dipole interactions. The MD results point to hydrophobic interactions and H‐bonds with the FA carboxyl group. Comparison of collision cross sections of deprotonated (MMP+FA) ions with MD structures suggests that the gaseous complexes are disordered.     

Microintumescent mechanism of flame‐retardant water‐based chitosan–ammonium polyphosphate multilayer nanocoating on cotton fabric

Layer‐by‐layer (LbL) assembly of nanocoatings on fabric substrates has been very successful in terms of reduction of flammability. In particular, an LbL system comprised ammonium polyphosphate as the polyanion and chitosan as the polycation, applied to cotton fabric, dramatically reduced cotton flammability. At this point, the fire‐retardant (FR) mechanism of action of this system has never been fully elucidated. Sonicated and nonsonicated coated cotton fabrics were evaluated using a vertical flame test and mass loss calorimeter. Coating morphology was investigated before and after burning. Thermal analyses and chemical analyses in the condensed phase (and in the gas phase) were conducted to reveal the FR mechanism of action. At the cotton surface, a combination of both condensed (formation of aromatic char) and gas phase (release of water and highly flammable gases) mechanisms impart the FR behavior, promoting a kind of “microintumescence” phenomenon. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43783.     

Structural studies of the phase separation in the UO2–PuO2–Pu2O3 ternary system

In the oxygen hypo-stoichiometric range of (U_1?yPu_y)O_2?x mixed oxide MOX fuels, the U–Pu–O phase diagram is known to exhibit a large biphasic domain depending on the Pu content. However, the phase equilibria are still to be fully described as various representations are proposed in the literature.In the present work, we notify new insights into the phase separation occurring in the UO₂–PuO₂–Pu₂O₃ domain at room temperature. Our microstructural and X-ray diffraction results are compared to the different representations reported in the literature. We provide, for the first time in the hypo-stoichiometric domain, an indisputable experimental observation of a triphasic region at high Pu content, composed of two fluorite-type structures and of one α-Pu₂O₃ sesquioxyde type structure. These results are in contradiction with previous experimental representations of the U–Pu–O ternary system.     

An investigation into the usability of electronic voting systems for complex elections

Many studies on electronic voting evaluate their usability in the context of simple elections. Complex elections, which take place in many European countries, also merit attention. The complexity of the voting process, as well as that of the tallying and verification of the ballots, makes usability even more crucial in this context. Complex elections, both paper-based and electronic, challenge voters and electoral officials to an unusual extent. In this work, we present two studies of an electronic voting system that is tailored to the needs of complex elections. In the first study, we evaluate the effectiveness of the ballot design with respect to motivating voters to verify their ballot. Furthermore, we identify factors that motivate voters to verify, or not to verify, their ballot. The second study also addresses the effectiveness of the ballot design in terms of verification, but this time from the electoral officials’ perspective. Last, but not least, we evaluate the usability of the implemented EasyVote prototype from both the voter and electoral official perspectives. In both studies, we were able to improve effectiveness, without impacting efficiency and satisfaction. Despite these usability improvements, it became clear that voters who trusted the electronic system were unlikely to verify their ballots. Moreover, these voters failed to detect the “fraudulent” manipulations. It is clear that well-formulated interventions are required in order to encourage verification and to improve the detection of errors or fraudulent attempts.     

Convergence analysis of hybrid cellular automata for topology optimization

The hybrid cellular automaton (HCA) algorithm was inspired by the structural adaptation of bones to their ever changing mechanical environment. This methodology has been shown to be an effective topology synthesis tool. In previous work, it has been observed that the convergence of the HCA methodology is affected by parameters of the algorithm. As a result, questions have been raised regarding the conditions by which HCA converges to an optimal design. The objective of this investigation is to examine the conditions that guarantee convergence to a Karush-Kuhn-Tucker (KKT) point. In this paper, it is shown that the HCA algorithm is a fixed point iterative scheme and the previously reported KKT optimality conditions are corrected. To demonstrate the convergence properties of the HCA algorithm, a simple cantilevered beam example is utilized. Plots of the spectral radius for projections of the design space are used to show regions of guaranteed convergence.