A polyacrylamide hydrogel for application at high temperature and salinity tolerance in temporary well plugging

In addition to conventional approach to ensure the successful application of polymer hydrogels in maintaining temporary well plugging, exact analysis of gel formation and gel strength properties in wellbore are necessary. In this work, bottles and rheology tests are used to investigate the polymer hydrogel gelation time and cross-linking kinetics of sol–gel systems which consist of polyacrylamide and chromium acetate hydroxide as a cross-linker. The effects of temperature of 90 °C and pressure of 3000 psi (typical Iranian oil well condition) were studied in relation to gelation time, strength and the mechanical properties of the hydrogel. The average molecular weight of the polymer chains between cross-link ties was evaluated using an oil-well laboratory system and compressive strength test. Differential scanning calorimeter (DSC) analysis of dried gel and the effect of temperature on the kinetics of the gel swelling in different solutions such as distilled water, tap water, formation water and oil were studied. The results showed that the number of tie points between each entanglement has not much reduced under pressure. Therefore, the prepared hydrogel can maintain its chemical structure under the Iranian oil well pressure and can be proposed to field studies. The degree of sol–gel reaction of prepared hydrogel and the activation energy based on the Arrhenius equation were calculated to be 1.5 and 274 kJ/mol, respectively.     

Utilization of different tall oils for improving the water resistance of cellulosic fibers

This study was conducted to assess the effect of the pulping by-products crude tall oil (CTO), distilled tall oil (DTO), and tall oil fatty acid (TOFA) on dynamic water vapor sorption behavior, interfiber strength, and thermal stability of cellulosic paper-sheets. The results were compared against those obtained in cellulose papers treated with the conventional petroleum-derived hydrophobic agent hydrowax and in untreated ones. The tall oil treatments caused strong reduction in equilibrium moisture content of the paper-sheets during adsorption and desorption runs. The same trend was noticed for the hydrowax-treated papers, however, it was less pronounced than the CTO-treated and DTO-treated samples in the relative humidity range of 75–95%. The sorption hysteresis was considerably decreased after the treatments. The ultimate dry-tensile strengths of the paper-sheets were significantly reduced by TOFA and hydrowax treatments, while CTO and DTO showed comparable strength as that of untreated control. The ultimate wet-strengths of the paper-sheets were improved after the treatments. The thermal stability of the specimens was improved by the tall oil treatments, and the hydrowax-treated samples illustrated lower degradation temperature than the untreated control. The results are promising for the use of tall oils as alternative hydrophobic agents of cellulosic fiber-based products, such as wood panels and paper packaging. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47303.     

High-density polyethylene membranes embedded with carboxylated and polyethylene glycol-grafted nanodiamond to be used in membrane bioreactors

In this work, neat and modified nanodiamond (ND) particles were embedded into high-density polyethylene (HDPE) membranes to improve hydrophilicity and antifouling properties. The membranes were prepared via thermally induced phase separation (TIPS) method and used for pharmaceutical wastewater treatment in membrane bioreactors (MBR) system. To prevent the agglomeration of ND, it was modified using two methods: thermal carboxylation (ND-COOH) and grafting with polyethylene glycol (ND-PEG). Membranes with different concentration of ND-COOH and ND-PEG nanoparticles ranging from 0.00 to 1.00 wt % were prepared and characterized using a set of analyses including water contact angle, pure water flux, tensile strength, differential scanning calorimeter, field emission scanning electron microscopy, and energy dispersive X-ray spectroscopy. It was found that the optimum contents of ND-COOH and ND-PEG nanoparticles were 0.50 wt % and 0.75 wt %, respectively. The interfacial interaction between nanoparticles and HDPE matrix was studied based on Pukanzsky model. To examine the performance of membranes, critical flux, filtration experiment in the MBR, and fouling analysis of membranes were carried out. The results showed that among the fabricated membranes, 0.75 wt % HDPE/ND-PEG membrane had the highest water flux and the best antifouling properties. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47914.     

Graft Copolymerization of Styrene‐Maleic Anhydride Onto Poly(Vinyl Chloride) and Its Cross‐linking by Toluene Diisocyanate: Characterization,Thermal, and Mechanical Properties

In this work, styrene‐maleic anhydride (St‐MA) copolymer was successfully grafted onto poly(vinyl chloride) (PVC) by means of chemical method in cyclohexanone medium. In this manner, the effects of various parameters such as total monomer content, monomers ratio, and initiator concentration on the grafting percentage (GP) and acid value (AV) were examined. The graft copolymers were characterized by Fourier‐transform infrared and nuclear magnetic resonance spectroscopy methods. Afterward, the cross‐linking reaction was carried out through MA hydrolysis and condensation reaction between maleic acid and produced diamines, by toluene diisocyanate (TDI) at the presence of hot water. The results showed that the GP and AV of PVC‐g‐(St‐MA) copolymers were considerably higher than those of PVC‐g‐MA and PVC‐g‐St with significant molecular weight. A gel content of 56% was attained with 1 phr TDI in PVC‐g‐(St‐MA) copolymer. The glass transition temperatures and mechanical properties of PVC‐g‐(St‐MA) samples were increased compared to pure PVC. Cross‐linked PVC‐g‐(St‐MA) showed improved mechanical properties than other samples, but the glass transition temperature of PVC backbone in this cross‐linked copolymer was disappeared due to its heavily dense structure. J. VINYL ADDIT. TECHNOL., 25:377–384, 2019. © 2019 Society of Plastics Engineers     

Direct synthesis of bi-modal porous structure MCM-41 and its application in CO2 capturing through amine-grafting

A bi-modal porous structure MCM-41 (BPS-MCM-41) was synthesized and functionalized by 3-[2-(2-Aminoethylamino)ethylamino]propyltrimethoxysilane (TRI); also, its performance in amine grafting and CO₂ capturing was compared with that of pore-expanded MCM-41 [1]. To create larger pores beside the mesoporous structure of MCM-41, carbon black nanoparticles were used as the solid template. Characterizing the BPS-MCM-41 using the BET and BJH techniques resulted in the surface reduction of 29.3 percent and volume increase of 68.46 percent. The pore size distribution showed two peaks: a narrow peak at 2.24 nm diameter, which belonged to micelles, and a wide one at about 50 nm due to the presence of used nanoparticles. The functionalization confirmed that BPS-MCM-41 is capable of accommodating a large quantity of amine groups. The CO₂ adsorption measurement indicated that internal volume of the adsorbent was a critical factor affecting the adsorption capacity of the amine grafted adsorbents.     

Predicting the Detonation Velocity of CHNO Explosives by a Simple Method

A simplified method is shown, based on a semi‐empirical procedure, to estimate the detonation velocities of CHNO explosives at various loading densities. It is assumed that the product composition consists almost of CO, CO₂, H₂O and N₂ for oxygen‐rich explosives. In addition solid carbon and H₂ are also counted for an oxygen‐lean explosive. The approximate detonation temperature, as a second needed parameter, can be calculated from the total heat capacity of the detonation products and the heat of formation of the explosive by PM3 procedure. The detonation velocities of some well‐known CHNO explosives, calculated by the simple procedure, fit well with measured detonation velocities and the results from the well‐established BKW‐EOS computer code.     

Effect of surface tension gradient on gas hold-up enhancement in aqueous solutions of electrolytes

The effect of addition of electrolytes on gas hold-up of air/water system was investigated experimentally in a laboratory scale bubble column. The experiments were carried out with four electrolytes, namely, NaCl, MgSO₄·7H₂O, Na₂SO₄ and CaCl₂·2H₂O and the concentrations of the solutions were varied from 0 to 0.3 mol/l. Enhancement of gas hold-up was observed for all four electrolytes at concentrations less than 0.1 mol/l. With the increase in concentration, the gas hold-up showed two different trends; in Na₂SO₄ and CaCl₂·2H₂O solutions, gas hold-up formed a sharp peak after the enhancement and leveled off at a value somewhat higher than that in water, whereas in NaCl and MgSO₄·7H₂O solutions, gas hold-up leveled off immediately after the enhancement without forming any peak. Experiments were also conducted to measure the surface tensions of the solutions with special focus in the low concentration region. A strong relation between the gas hold-up enhancement and the change of surface tension with the addition of electrolyte was found. It was also observed that the concentration at which maximum value of C(dσ/dC)² i.e. (concentration × surface tension gradient with respect to concentration²) is obtained corresponds to the concentration at which maximum gas hold-up enhancement occurs.     

Antioxidants and antiradicals in almond hull and shell (Amygdalus communis L.) as a function of genotype

To compare the antioxidant and antiradical activity of Amygdalus communis L. hulls and shells phenolic extracts in different genotypes, 18 A. communis L. genotypes were selected from those in Qooshchi, Qalgachi, Qovarchin Qale, Najaf Abad, Jamal Abad, Kahriz, Sfahlan of West and East Azerbayjan provinces of Iran in 2007. The fruits of these almonds were collected, their hulls and shells dried, ground and then methanolic extracts prepared from these hulls and shells. Total phenolic content was determined using the Folin–Ciocalteu (F–C) method. The extracts’ reducing power and scavenging capacity for radical nitrite, hydrogen peroxide and superoxide were evaluated. Significant differences were found in phenolic content of hulls and shells among various genotypes, radical scavenging capacity percentage varied significantly among genotypes and their hulls and shells. S₃-7 genotype with the highest phenolic content and antioxidant activity in its hulls represents a valuable genotype for procuring antioxidant phenolic compounds.     

中间层成分对GTD-111/IN-718高温合金在瞬时液相连接过程中显微组织和力学性能的影响

研究使用不同的中间层瞬时液相连接两种异种高温合金的适用性.在1100℃、不同时间下瞬时液相连接GTD-111/IN-718体系,研究BNi-2、BNi-3和BNi-9三种类型的中间层对该体系显微组织和力学性能的影响.采用场发射扫描电子显微镜和能量色散光谱技术,研究接头区域的成分变化和显微组织.结果表明,非热凝固区Ni3...     

Flexible poly(styrene-ethylene-butadiene-styrene) hybrid nanofibers for bioengineering and water filtration applications

Among the thermoplastic elastomers that play important roles in the polymer industry due to their superior properties, styrene-based species and polyurethane block copolymers are of great interest. Poly(styrene-ethylene-butadiene-styrene) (SEBS) as a triblock copolymer seems to have the potential to meet many demands in different applications due to various industrial requirements where durability, biocompatibility, breaking elongation, and interfacial adhesion are important. In this study, the SEBS triblock copolymer was functionalized with natural (Satureja hortensis, SH) and synthetic (nanopowder, TiO₂) agents to obtain composite nanofibers by electrospinning and electrospraying methods for use in biomedical and water filtration applications. The results were compared with thermoplastic polyurethane (TPU) composite nanofibers, which are commonly used in these fields. Here, functionalized SEBS nanofibers exhibited antibacterial effect while at the same time improving cell viability. In addition, because of successful water filtration by using the SEBS composite nanofibers, the material may have a good potential to be used comparably to TPU for the application.