The activation of fibroblast growth factors (FGFs) by glycosaminoglycans: influence of the sulfation pattern on the biological activity of FGF-1

Six synthetic heparin-like oligosaccharides have been used to investigate the effect of the oligosaccharide sulfation pattern on the stimulation of acidic fibroblast growth factor (FGF-1) induced mitogenesis signaling and the biological significance of FGF-1 trans dimerization in the FGF-1 activation process. It has been found that some molecules with a sulfation pattern that does not contain the internal trisaccharide motif, which has been proposed for high affinity for FGF-1, stimulate FGF-1 more efficiently than those with the structure of the regular region of heparin. In contrast to regular region oligosaccharides, in which the sulfate groups are distributed on both sides of their helical three-dimensional structures, the molecules containing this particular sulfation pattern display the sulfate groups only on one side of the helix. These results and the fact that these oligosaccharides do not promote FGF-1 dimerization according to sedimentation-equilibrium analysis, confirm the importance of negative-charge distribution in the activation process and strongly suggest that FGF dimerization is not a general and absolute requirement for biological activity.     

Absence of ferromagnetism in ferroelectric Mn-doped BaTiO3 nanofibers

Pure and Mn-doped barium titanate nanofibers were synthesized by the electrospinning method. The morphology, microstructure and crystal structure of as-spun and annealed composite nanofibers were characterized by scanning electron microscopy and transmission electron microscopy. After annealing at 850°C, we obtain nanofibers a few μm long, formed by nanoparticles of irregular shape with sizes around 100 nm. X-ray diffraction and Raman spectroscopy show that a partial phase transition from tetragonal to hexagonal takes place for BaTi_0.90Mn_0.10O₃. Vibrational phonon modes were calculated for BaTiO₃ within the density functional theory (DFT) framework. Ferroelectricity has been probed on pure and Mn-doped BaTiO₃ nanofibers, by means of piezoresponse force microscopy in an atomic force microscope, confirming the polar domain switching behavior of the fibers. The measured piezoelectric coefficient d₃₃ were 31 and 22 pm/V for BaTiO₃ and BaTi_0.90Mn_0.10O₃. Magnetic properties of the samples were probed in a superconducting quantum interference device. Diamagnetic and paramagnetic behaviors were found in pure and Mn-doped samples, respectively.     

Synthesis and characterization of cellulose acetate from royal palm tree agroindustrial waste

This study provides a novel value‐added utilization of the agroindustrial waste of royal palm tree leaf sheath to produce cellulose acetate. One of the motivations of this work was the fact that Brazil is one of the largest heart of palm producers in the world. However, as a result of extraction and processing, tons of waste are generated and discharged to the environment. Such waste is rich in lignocellulosic material, which could be reused to obtain derivatives of interest and commercial value. The synthesis of cellulose acetate was performed through a homogeneous acetylation reaction. Three different conditions were tested for delignification of the raw material, which resulted in a reduction in lignin content from 17.75 to 7.72%. The highest yield of cellulose acetate reached 99.5%, with degree of substitutions ranging between 2.08 and 2.82, which indicates satisfactory conversion. The Fourier transform infrared spectrum showed that practically all hydroxyl groups were replaced by acetate groups; this was also confirmed by nuclear magnetic resonance analysis. X‐ray diffraction analysis showed that the cellulose acetate crystallinity index was 8.9%. This demonstrates the viable potential of cellulose acetate production with low cost and use of highly available agroindustrial waste. POLYM. ENG. SCI., 59:891–898, 2019. © 2018 Society of Plastics Engineers     

Corrosion behavior of Eurofer 97 and ODS-Eurofer alloys compared to traditional stainless steels

In the present work, the corrosion resistance of ferritic-martensitic EUROFER 97 and ODS-EUROFER steels was tested in solutions containing NaCl or H₂SO₄ and KSCN, both at 25 °C. The results were compared to those of AISI 430 ferritic and AISI 410 martensitic conventional stainless steels. The as-received samples were tested by electrochemical techniques, specifically, electrochemical impedance spectroscopy, potentiodynamic polarization curves, and double-loop electrochemical potentiokinetic reactivation tests. The surfaces were observed by scanning electron microscopy after exposure to corrosive media. The results showed that EUROFER 97 and ODS-EUROFER alloys present similar corrosion resistance but lower than ferritic AISI 430 and martensitic 410 stainless steels.     

Hysteresis loops of individual Co nanostripes measured by magnetic force microscopy

High-resolution magnetic imaging is of utmost importance to understand magnetism at the nanoscale. In the present work, we use a magnetic force microscope (MFM) operating under in-plane magnetic field in order to observe with high accuracy the domain configuration changes in Co nanowires as a function of the externally applied magnetic field. The main result is the quantitative evaluation of the coercive field of the individual nanostructures. Such characterization is performed by using an MFM-based technique in which a map of the magnetic signal is obtained as a function of both the lateral displacement and the magnetic field.     

Electrical, mechanical, and glass transition behavior of polycarbonate-based nanocomposites with different multi-walled carbon nanotubes

Five commercially available multi-walled carbon nanotubes (MWNTs), with different characteristics, were melt mixed with polycarbonate (PC) in a twin-screw micro compounder to obtain nanocomposites containing 0.25-3.0 wt.% MWNT. The electrical properties of the composites were assessed using bulk electrical conductivity measurements, the mechanical properties of the composites were evaluated using tensile tests and dynamic mechanical analysis (DMA), and the thermal properties of the composites were investigated using differential scanning calorimetry (DSC). Electrical percolation thresholds (p_cs) were observed between 0.28 wt.% and 0.60 wt.%, which are comparable with other well-dispersed melt mixed materials. Based on measurements of diameter and length distributions of unprocessed tubes it was found that nanotubes with high aspect ratios exhibited lower p_cs, although one sample did show higher p_c than expected (based on aspect ratio) which was attributed to poorer dispersion achieved during mixing. The stress-strain behavior of the composites is only slightly altered with CNT addition; however, the strain at break is decreased even at low loadings. DMA tests suggest the formation of a combined polymer-CNT continuous network evidenced by measurable storage moduli at temperatures above the glass transition temperature (T_g), consistent with a mild reinforcement effect. The composites showed lower glass transition temperatures than that of pure PC. Lowering of the height of the tanδ peak from DMA and reductions in the heat capacity change at the glass transition from DSC indicate that MWNTs reduced the amount of polymer material that participates in the glass transition of the composites, consistent with immobilization of polymer at the nanotube interface.     

Effect of Water on the Ethanolysis of Waste Cooking Soybean Oil Using a Tin(II) Chloride Catalyst

Biodiesel production from cheap lipid raw materials is economically welcome, but a high free fatty acids (FFA) content makes it incompatible with traditional alkaline catalysts. Although liquid mineral acids are alternatively used, serious drawbacks such as high corrosiveness and large effluent generation, as well as the impossibility of catalyst reuse compromises its application. Contrarily, solid acid catalysts appear to be an attractive option; however, the water present or generated during FFA esterification provokes the leaching and deactivation of these catalysts. Thus, in this work we have evaluated the use of tin chloride SnCl₂, which is less corrosive, water tolerant, and a recyclable Lewis acid catalyst, on FFA ethanolysis using waste cooking oil samples (WCO). Additionally, the main kinetic parameters of the reactions were assessed. Compared to pTSA (p-toluenesulfonic-acid), a catalyst also evaluated, SnCl₂ efficiently promoted FFA ethanolysis even in the presence of high amounts of water (ca. 0.1–5.0% w/w). Moreover, the homogeneous SnCl₂ catalyst was easily recovered and reused successively, without loss of activity.     

A Perinatal Palatable High-Fat Diet Increases Food Intake and Promotes Hypercholesterolemia in Adult Rats

The main goal of the present study was to evaluate the long-term effects of a perinatal palatable high-fat diet on the food intake and cholesterol profile of adult rats. Male Wistar rats (aged 22 days) were divided into two groups according to their mother’s diet during gestation and lactation (C _p, n = 10; pups from control mothers; and HL_p n = 10; pups from mothers fed a palatable high-fat diet). At the 76th day, pups were housed individually for 14 days, and daily food consumption was determined during a period of 6 days. Blood from 100-day-old rats was sampled by cardiac puncture. Fasting (12 h) serum glucose, total cholesterol, LDL-C, HDL-C, triglycerides (TG), and VLDL-C levels were determined. The measurement of food intake was higher in the animals submitted to a hyperlipidic diet during the perinatal period. Serum total cholesterol, LDL-C, HDL-C, TG, VLDL-C and glycemia were increased in the HL_p group compared to the control group. Our findings show that an early life environment with a high-fat diet can contribute to metabolic disease in later life.     

Preparation and characterisation of poly(3,4-ethylenedioxythiophene) and poly(3,4-ethylenedioxythiophene)/poly(neutral red) modified carbon film electrodes, and application as sensors for hydrogen peroxide

Poly(3,4-ethylenedioxythiophene) (PEDOT) films have been prepared for the first time on carbon-film electrodes (CFE) in aqueous solution using electropolymerisation by potential cycling, potentiostatically and galavanostatically. Characterisation of the modified electrodes was done by cyclic voltammetry and electrochemical impedance spectroscopy and the stability of the polymer films was probed. The coated electrodes were tested for application as hydrogen peroxide sensors, by oxidation and reduction. A novel polymer film was also formed by modification of CFE by co-electropolymerisation of EDOT and the phenazine dye neutral red (NR) – (PEDOT/PNR) with a view to enhancing the properties for sensor applications. It was found that hydrogen peroxide reduction at the PEDOT/PNR coated electrodes could be carried out at a less negative potential, the sensor performance comparing very favourably with that of other polymer-modified electrodes reported in the literature.